Two blue lights: Between 3.5-3.8 volts; medium to high charge Two orange lights: 3.5 volts (or less); low charge to almost dead Luckily the Breeze 2 has pass-thru charging because it takes a long effin’ time to charge!
What does the orange light mean on Aspire vape pen?
Aspire vape pen orange light – what does this mean? An orange light on your device means that it is almost time to charge your kit. It has a maximum of 30% battery left.
What does the LED light behind my vape’s fire button mean?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience, especially if the device doesn’t have a digital display.
Is the Breeze 2 the best entry-level vape device for You?
The simplicity of the design and its single fire button make the Breeze 2 perfect for new vapers searching for an entry-level device. The Breeze 2 doesn’t require a lot of maintenance, has few removable parts, and is easy to use. For such a small device, the Breeze 2 performs exceedingly well.
How do I know when the Breeze 2 is fully charged?
When the battery level of the Breeze 2 drops below 3.2 volts, the Breeze 2 will shut down and the LED with flash orange fifteen times. When the Breeze 2 is fully charged, the LED will flash both blue and orange twenty times, and then remain off.
What is the coil size of the Breeze 2?
The Breeze 2 comes with the 0.6-ohm coil of the original Breeze and a new 1.0-ohm Utech coil head. They both wick from two small holes and one larger slot. The 0.6-ohm head has larger wicking holes than the higher resistance heads, which is ideal for higher viscosity juices. In general, both coils work really well.
How many parts does the Breeze 2 have?
The Breeze is a simple device, but a beginner might get a little confused at first. And I think the instruction manual is lacking. The Breeze 2 has five main parts: a battery, coil heads, a pod, a mouthpiece, and an airflow controller. It has three buttons, a fire button located on the front, and two pod-release buttons on the side.
How to adjust airflow on a Vape?
Adjust the airflow you want by turning the knurled ring, then return the mouthpiece. Wait about five minutes for the coil to saturate, then quickly press the fire button five times to turn on the device. Vape. Using the pod release buttons is pure fun. They work well with the latches on the deck to secure the pods.
How many mm does a Breeze 2 pod have?
Refilling the pod is simple due to the Breeze 2 having a 5 mm fill opening. And the anchored plug totally seals the ports – there’s been absolutely no leaking. Maybe a faint layer of condensation once or twice, but typically the bottom of the pod and battery housing is dry.
How big is the Breeze 2?
The Breeze 2 dimensions are 95 mm x 35 mm x 19 mm, just slightly taller and wider than the first version. But it’s barely noticeable. Interestingly, the Breeze 2 weighs less than the original — likely because the long metal chimney is gone, and the mouthpiece is a much thinner plastic than before.
Is the Breeze 2 PCC compatible?
All things considered, I’d still prefer a long charge and long battery life than the opposite. The Breeze 2 is not PCC (Portable Charger Case) compatible like the original, but the charge port has been moved up along the side, instead of the bottom of the device.
Is the Breeze 2 a disposable pod?
The pod for the Breeze 2 is thick and durable. It’s not the cheap disposable kind of pod we’re so used to. It’s easy to clean, and it’s easy to monitor your juice levels. Despite it being dark-tinted, nothing obstructs the view from either side of the device.
Aspire Breeze 2 Airflow System
Adjusting the airflow is simple, just pull off the mouthpiece and turn the knurled airflow adjustment ring to your liking.
Aspire Breeze 2 Pod
The ‘pod’ comes in two capacities, a 2ml TPD compliant version and a 3ml standard version. To remove the pod just squeeze the pod release buttons on each side of the device to release and remove the pod system. To re-insert, just place the pod back into the power unit, and push down firmly until it ‘clicks’ into place.
Aspire Breeze 2 Coil Installation
Coil installation is easy too, just pull and remove the drip tip, unscrew and pull out the chimney unit. Then detach the atomizer from the airflow control ring and replace it with a new one. Screw the chimney unit back to the pod system and replace the drip tip section.
Aspire Breeze 2 Atomizer
The Breeze 2 comes pre-installed with a 1.0-ohm U-tech coil (specifically designed for nicotine salt type e-liquids)
Aspire Breeze 2 Filling
Squeeze pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.
Aspire Breeze 2 Charging
Charge via the Micro USB port. Maximum charge current can reach up to 800mA. When the USB cable is attached the Breeze 2 indicator light will flash blue and orange three times.
How many volts does a Breeze 2 have?
The battery life of the Breeze 2 is indicated by colored LEDs that sit just below the pod. There are three different color combinations: 3.8 volts and above: both Blue and Orange lights.
How many times does the Breeze 2 light flash?
When the Breeze 2 is fully charged, the LED will flash both blue and orange twenty times, and then remain off. The LED indicators can be pretty hard to see through the pod, and you may have to remove it to check your battery level every once in a while.
How to fill Aspire Breeze 2?
To fill the Breeze 2, you’ll want to release the pod by pushing the two pod-release buttons on the side of the device. Slide the pod up and out and carefully remove the drip tip. We say carefully because the drip tip on the Breeze 2 is a little too snug and tends to go flying whenever its removed.
How much juice does the Breeze 2 hold?
Instead of a built-in tank, the Breeze 2 features a new refillable pod system that will hold up to 3ml of ejuice. The pod is quite darkly tinted, but it’s still very easy to see how much juice you have inside. The pod on the Breeze 2 appears to be quite durable, and it’s thick enough that it won’t easily crack.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
What is the Breeze 2?
The Breeze 2 is a well-built, compact device. Similar to the original, the Breeze 2 is made of aluminum alloy and is an all-in-one device with a rounded rectangular body. In terms of size, it’s only a bit taller than a credit card, and about half as wide.
Does the Breeze 2 have a drip tip?
The drip tip on the Breeze 2 is very similar to the original, however there are now five small air flow holes on both sides. A drip tip cover is included with the Breeze 2 but it doesn’t fit on the bottom of the device when not in use, so be careful not to lose it.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my coil shorting?
If you’re building your own coils, or even if you’re buying stock coils, there’s a chance that they are causing a short in your device. If the resistance is too low or the coil has been damaged, it will immediately send an error message to your device which then flashes the warning to you.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
Baditude ECF Guru ECF Veteran
"Short Circuit Protection: When the Breeze detects a short, it will stop firing, and the LED light will flash blue and orange 2 or 3 times depending on where the short has occurred.
SteveS45 Moved On ECF Veteran
Are you sure it is Auto Firing or are you assuming it is firing? Has it fried a coil?
stols001 Moved On ECF Veteran
Was it working at one point, and then this happened? Or was it like that out of the gate? Because it does sound like it could be a mechanical malfunction in which case warrantying it would be helpful. But it's possible that it's user error as well....
Kassian Full Member
Are you sure it is Auto Firing or are you assuming it is firing? Has it fried a coil?
Kassian Full Member
Was it working at one point, and then this happened? Or was it like that out of the gate? Because it does sound like it could be a mechanical malfunction in which case warrantying it would be helpful. But it's possible that it's user error as well....
Kassian Full Member
Are you sure it is Auto Firing or are you assuming it is firing? Has it fried a coil?
SteveS45 Moved On ECF Veteran
Yeah sounds like it is auto firing. Does it have a button to fire or is it operated by the draw?
