Turning on Your SMOK Vape
- First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three. ...
- Once your device is unlocked, press the main fire button three times to access the device menu. ...
- After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. ...
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I Turn on and unlock my smokvape?
Here’s a quick rundown of how to turn on and unlock your SMOKvape and what to do if you run into a problem. First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I use a smok alien vape?
While the device is on, press and hold the Fire Key to vape (it will be forced to stop working when the vaping time exceeds 8 seconds, release and press again to vape). I've just bought a Smok Alien. You need to take care that you do not cross the recommended wattage limit that is given on your SMOK vape coil’s side.
How to unlock vape kits?
Here in following are the ways to unlock your vape kits in most vape kits: 1. Three clicks of the firing button take you to the menu. nord 4 (80W) is an emblematic pod system kit with versatile capabilities, which can give full play to the performance and advantages of the entire device.
Why is my Smok in power lock?
This is a surprisingly common issue that customers have and one of the easiest to solve. SMOK NORD 4 pod system kits are shipped in a locked position. In order to unlock your device, simply click the 'power button' three times quickly. This will unlock your SMOK NORD 4.
How do you unlock Watts on Smok?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
How do you turn off Smok Watt lock?
You can adjust wattage, choose between auto-draw or auto-draw and button fire, as well as lock your wattage.Turn on/off : Press fire button x5 times.Switch between auto-draw OR dual fire mode : Press fire button x3 times.Lock Wattage: Press Up/Down simultaneously.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I unlock my vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do you unlock Watts on Smok guardian?
Near the Guardian's display, you'll see the two adjustment buttons that allow you to change the device's wattage. The SMOK Guardian includes two coils: a 0.4-ohm mesh coil and a 0.6-ohm triple coil. Both coils have a recommended operational power of 25 watts.
How do you unlock Smok species?
To unlock the screen just hold the screen lock button for 5 seconds or less. The Species 230W Mod by Smok combines high-tech and vaping to bring you a wonderful vaping experience. Although it has advanced features and a touch screen, the Species is user friendly and easy to use.
How do you unlock Watts on Smok rpm80?
Left + Right Button = Lock/Unlock Wattage Setting. Fire Button 3 Clicks – Lock/Unlock Fire Button.
How do you unlock Watts on Smok rpm40?
0:382:33SMOK RPM40 Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe device on or off simply press the fire button five consecutive times in quick succession. ToMoreThe device on or off simply press the fire button five consecutive times in quick succession. To increase or decrease the wattage.
How do you unlock SMOK vapor?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don't have to literally count out five clicks every time.
Why is my SMOK not working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
What do you do if your SMOK vape wont turn on?
If your SMOK vape isn't turning on, it could be a quick fix:Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use.Check the battery to confirm that it's properly inserted.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
How to unlock a vape pen?
In order to unlock your vape pen, you just need to press the button a few times in quick succession until you see the button’s light flashing. The instructions may tell you to press the button a set number of times, but you don’t press the button quickly enough during those times then that may not work. The best way to do it is to press the button very quickly several times (usually 5-6 is enough) until you see the light flashing. Your vape pen will then be unlocked and ready to use. You can check it is unlocked by pressing the button one time after this procedure and it should remain a steady light.
What happens if your vape pen doesn't unlock?
If Your Vape Pen Does Not Unlock. If you vape pen does not unlock when you follow the above procedure, then perhaps your battery is dead. If you put your battery on charge for around 10 minutes and try again, this should be enough to unlock your vape pen if that is the problem. Your vape pen battery should last for around 2 years, ...
What does it mean when a vape pen is unlocked?
If the vape pen is unlocked, it will light up. If the vape pen is locked (as it should be) there will be no light. This could also mean that your vape pen needs charging. Either way, you will know it is not switched on and this is a simple rule to follow every time you get your vape pen out.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
SMOK Nord 4 vs. Nord X, Nord 2 and Nord: Is It Worth the Upgrade?
If you’re followed the development of the SMOK Nord series, you’ve probably noticed that there’s been quite a lot of feature creep over the years.
What Pods and Coils Are Available for the SMOK Nord 4?
If you’re familiar with the SMOK Nord series, you know that the coils are interchangeable between the different devices. As long as you’re using the correct pod for the coil – and the coil’s resistance is within the device’s supported range – you can use any coil with any device.
How to Charge the SMOK Nord 4
You can charge the SMOK Nord 4 by connecting it to your computer using the included USB-C cable. When the device charges, the screen displays a percentage indicator. It also displays an estimate of how long it’ll take until the charging process is complete. When the device is fully charged, the screen will display “100%.”
How to Fill the SMOK Nord 4
To fill the SMOK Nord 4, start by pulling the pod out of the device. You’ll see a red silicone stopper on the side of the pod. Lift the stopper and add e-liquid to the pod until the reservoir is almost full. Replace the pod and return it to the device. Don’t begin vaping until you’ve given the coil a few minutes to absorb the e-liquid.
How to Vape with the SMOK Nord 4
After you disconnect the SMOK Nord 4 from the charging cable, you’ll probably find that the device is turned off. Press the fire button five times quickly until you see the SMOK logo. Give the device a moment to start up, and you’ll be ready to vape.
How to Replace the SMOK Nord 4 Coil
After several days of vaping, you’re going to find that the SMOK Nord 4 doesn’t produce the same flavor quality that it did when the coil was new. That means it’s time for a new coil. To replace the SMOK Nord 4 coil, start by removing the pod from the device. On the bottom of the pod, you’ll see the circular outline of the coil.
How to Fix Problems with the SMOK Nord 4
The engineers at SMOK have been designing industry-leading vaping devices for many years now, and that means you can generally expect a completely problem-free experience with the SMOK Nord 4. If you do happen to encounter an issue, though, we’ve got your back.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.