how to use your apx pulsar vape

by Geoffrey Satterfield Published 2 years ago Updated 1 year ago

The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.

Part of a video titled Pulsar APX Wax Tutorial - YouTube

0:12

2:17

The Pulsar apx wax vaporizer does not have any type of temperature. Control simply press and holdMoreThe Pulsar apx wax vaporizer does not have any type of temperature. Control simply press and hold the power button until the light changes from red to green heating.

Full Answer

How to use the pulsar APX V2 vaporizer?

How To Operate The Pulsar APX V2 The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.

What is the best APX vape V3?

Manuals. Clutch. ECF Cone Filler. DuploCart H2O. APX Smoker V3. APX Wax V3. APX Wax V3 Blackout. GiGi H2O. APX Volt V3.

Is the APX smoker a vaporizer?

May 01, 2017 · TVape shows you how to use the Pulsar APX Wax and get the most from this tiny terror.To learn more about this device: https://bit.ly/2SVdRgqTo jump to a spec...

What is the APX volt V3 variable voltage vaporizer for wax?

I sterilized it and put the herb in it and then turned it on, set it to the highest temp (428) and it heated up and everything. It won’t let out a lot of smoke, plus I’m not sure if I should hold down the button or just hit it without pressing anything. I tried leaving it for 30 seconds then smoking it and a very small amount of smoke came ...

How does the APX vape work?

Part of a video titled APX Vape & APX Smoker Review - YouTube

1:09

4:39

So the a px vape is really simple I went ahead and turn mine on right now and set 392 degreesMoreSo the a px vape is really simple I went ahead and turn mine on right now and set 392 degrees Fahrenheit. One two three four five clicks will turn it on and off.

How do you use a pulsar wax vape?

How to Use

Remove the glass mouthpiece, dab your wax onto the coils, and then replace the mouthpiece.
Press the power button five times to turn on the device.
Hold down the power button to initiate heating.
Inhale from the mouthpiece while holding down the power button.

Aug 12, 2019

How do you inhale an APX vaporizer?

To hit the pen, hold down the power button and inhale through the mouthpiece. You can also change the temperature settings while vaping, which is a great feature when searching for your desired temp.Apr 6, 2022

How do you use a pulsar vape battery?

Instructions:

Turn On/Off = 5 clicks.
Change Voltage = 3 clicks.
Preheat for 15 seconds = 2 clicks.
Vaporize Oil/Liquid = 1 click and hold.

What is APX wax?

The Pulsar APX Wax is a pure wax vaporizer powered by a 1100mAh battery. Featuring triple Quartz coil atomizers that distribute the heat efficiently and evenly, the APX produces pure and flavorful vapors. It is perfect for wax or dabs connoisseurs.

How long do Pulsar APX wax coils last?

The Pulsar APX Wax features a standard 1100 mAH lithium ion battery which gives users a solid ninety minutes of non-stop usage. Users should bear in mind that the device is meant to be used sporadically since it is geared for heavy hits.

Why is my Pulsar vape not working?

Solution #1: Most likely, the coil or atomizer does not work – make sure the coil or atomizer is properly attached and has a good connection. Solution #2: The other cause could be a dead battery. Make sure your battery is fully charged. If it still is not working, your battery could be dead.May 15, 2018

How do I turn off my APX vape?

The Pulsar APX V2 has an easy-to-use one-button operating system. You'll find this button on the unit's side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.May 5, 2020

How long does a pulsar battery take to charge?

4-hour full charge time.Mar 18, 2019

How do I preheat a pulsar battery?

This Variable Voltage Battery w/ Preheat works great with prefilled oil cartridges or wax atomizer tanks. Offers 3 color coded voltage settings: Red / 4.0V, Blue / 3.7V, Green / 3.4V. Click 5x to turn on, click 3x to change voltage, click 2x to preheat for 15 seconds, click 1x to use.

How to clean a vape mouthpiece?

Cleaning the mouthpiece - The glass or metal mouthpiece on the top has a friction fit and can be easily removed by pulling it away from the vape body with light force.

How to clean a vaporizer with alcohol?

These steps can be performed while the mouthpieces are soaking. Ensure vaporizer is turned off and fully cooled prior to cleaning. Snap the stem of the cotton swab to release the isopropyl alcohol into the cleaning tips. Alternatively dip a dry cotton swab into the 91% isopropyl alcohol.

How to cover mouthpiece with isopropyl alcohol?

Pour enough isopropyl alcohol into a soaking container to cover the glass or metal mouthpiece.

How to clean a vape chamber?

The best way to clean the chamber is with an alcohol-filled cotton swab. These steps can be performed while the mouthpieces are soaking.

How long to soak silicone mouthpiece?

Separate the silicone liner from the plastic mouthpiece and place them in the soaking container for one hour.

How long to dry fire a vaporizer?

Swirl the cotton swab tip around all surfaces of the heating chamber and surrounding areas to remove resin and other residues. Let the vaporizer sit for 3 minutes and then dry-fire by turning it on to the highest heat setting. The heat will evaporate any remaining alcohol residue.

How to clean 510 threads?

Use the cleaning swab to wipe the 510 thread ing of the vape body.

What is included in the APX V3 vape kit?

The vaporizer kit includes the APX V3 vape, mouthpiece, USB cable, stir tool, & cleaning brush.

How tall is the APX wax?

Get ready to make big clouds with the APX Wax V3 Vaporizer. At 3.5 inches tall, the portable size packs a big punch with a powerful 1100mAh battery and triple quartz atomizer. Enjoy the best possible taste from your concentrates with a pure quartz lined chamber.

What is the new V3 wax?

The new V3 Wax features an enhanced LED display, a 2-click hands-free Power Mode and updated USB-C fast charging. The enhanced LED display is larger than the V2 and shows the battery level with a color changing APX logo. The hands-free mode keeps you from having to engage the power button while it heats up and during your sesh.

Vape-FAQ.com