The variable wattage vaping mode makes it easy. When you use your mod’s variable wattage mode, your device may also offer selectable preheating strengths such as “Soft,” “Normal” and “Hard.” The preheating strength controls how quickly the device reaches the target wattage.
Full Answer
What are the different types of vape mods?
Our page covers all popular categories: from single-battery mods that can fit in the palm of your hand to triple-battery powerhouses, and from highly adjustable DNA-powered devices to mechanical mods for the advanced hobbyist. You are guaranteed to find what you are looking for, regardless of your vaping style.
What is the Smart vaping mode?
The smart vaping mode is a proprietary feature that varies from device to device, so the implementation of this mode will vary. In some cases, a vape mod’s smart mode will cause the device to check the resistance of the attached tank and automatically suggest an appropriate wattage.
What are advanced vaping modes and should you try them out?
But if you want to get the most out of your mod, it’s worth learning what these advanced vaping modes do and why you might want to try them out. Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of variable wattage.
Which vape mods have bypass mode?
Examples of mods with Bypass Mode include the Innokin Kroma-R and the Aspire Sunbox AIO kit. Custom power curves, found on devices like the Aspire Finnix mod, allow you to vary the wattage you’re vaping at during your puff.
What is the difference between soft normal and hard vape?
When you use the “Hard” setting, the coil will reach its maximum temperature almost instantly when you press your mod's fire button. When you use the “Soft” setting, the coil temperature will ramp up slowly. So, how can you tell what the right vaping wattage is for your vape tank?
What is soft mode in vape?
Soft is slow ramp up. Normal is a little faster ramp up. And hard is almost instant wattage.
What mode should I use on my vape?
What Mode Should I Use On My Vape?Wattage/Voltage (Power Mode) Appropriate Wire Materials: Kanthal, Stainless Steel (SS), NiChrome (NiCr) ... Nickel Mode (Ni Mode) Appropriate Wire Materials: Nickel (Ni) ... Titanium Mode (Ti Mode) Appropriate Wire Materials: Titanium (Ti) ... Stainless Steel Mode (SS Mode)
Do you have to pull hard on a vape?
Why do I have to pull so hard on my vape? Chances are, if you're pulling hard on your vape pen it's because you've been pulling too hard in the past and you've flooded the tank. Drawing hard when you vape causes the wicks to absorb more concentrate than the coil can vaporize.
What should my Smok vape be set at?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What is TC and VW mode?
The basic idea with TC is you set the temperature you want and the mod does the rest. Rather than hitting the firing button to add more fuel to the flame like in VW mode, TC mode adjusts everything internally on the fly. This prevents the wick and coil from ever getting hotter than the temperature you've set.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
Why is vaping harsh at first?
Perhaps the most common cause for a harsh vape is the strength of nicotine is too high. This is an easy mistake to make, particularly if you're just starting out on your vaping journey, and switching up your e-liquid for one that contains less nicotine should swiftly resolve the issue.
Why does my vape burn my throat when I inhale?
Dry Hit. If you inhale when there is no vaping juice to vaporize, you will experience a "dry hit." This can cause a burning sensation that is very uncomfortable. This will temporarily cause a sore throat.
How long should you drag on a vape?
Generally, 15 to 30 seconds are enough before you take another hit, but you can wait longer, especially if you are experiencing dry hits more often. It can be hard to get used to, especially if you're previously a smoker which doesn't require you to wait for anything.
Which Vape Mode Should I Use?
It might be overwhelming to find your way through all of the options available for your mod if you’re new to vaping or new to vaping with a multi-setting device.
Wattages that have been pre-set
Preset wattages are essentially a way of saving your most frequently used settings for later retrieval. For example, you may want to vape at 60W with a sub-ohm tank, 25W with a Mouth-to-Lung device, and 50W with a rebuildable.
Power curves made to order
Custom power curves, like as those found on the Aspire Finnix mod, allow you to change the wattage you’re vaping at throughout each puff. For example, your gadget may be set at 40W, but with a unique power curve, it could start at 50W, then reduce to 45W after a second, 40W after two, and finally 35W for any puff lasting more than four seconds.
Mode of bypass
Because it removes the primary feature of variable wattage, bypass mode is one of the easiest “advanced” vape settings.
Pulse mode is an option
Pulse mode isn’t the most frequent vape mode, however it’s available on the Vaporesso Gen S in particular.
Mode for super players
Another Vaporesso specialty is Super Player mode (available with the Swag II), which lets you to utilise coils with a broader range of resistances than the device normally permits, down to 0.03 (and up to 5) with the Omni Board 4.0. (and up to the more recent V 4.2).
Temperature regulation
Temperature control (TC) vaping is essentially temperature limiting, in that you specify a maximum temperature for your coil and the device makes sure it stays within that range.
EIHYPI Moved On ECF Veteran
I know that my Revenger has an option to take a hit on hard, medium or soft. Even though I have been vaping for quite some time I have never messed with these particular settings.
Letitia Citrus Junkie ECF Veteran
I've tried all these settings and always go back to normal. Would probably use hard if I did tc.
Wraith504 Ultra Member Verified Member ECF Veteran
VW-HIGH mode : The kit provides a higher start watt in the first few seconds to bring you a stronger hit and wonderful vaping experience.
gofishtx Vaping Master Verified Member ECF Veteran
I know that my Revenger has an option to take a hit on hard, medium or soft. Even though I have been vaping for quite some time I have never messed with these particular settings.
FΛDED Senior Member ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
Letitia Citrus Junkie ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
Wraith504 Ultra Member Verified Member ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
What is a custom power curve?
Custom power curves allow you to vary the wattage you’re vaping at during your puff. For example, you can have your device set at 40W, but with a custom power curve, it might start out at say 50W, then drop down to 45W after a second, to 40W after two, and then for any puff longer than four seconds, drop to 35W.
What is bypass mode in vape?
Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of a variable wattage mod. You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you’re using. This means that your effective wattage will be higher when the battery or batteries are fully charged and lower as you continue vaping throughout the day.
What is TC vaping?
Temperature control (TC) vaping is really “temperature limiting,” in that you effectively set a maximum temperature you want your coil to reach and your device ensures it stays within this limit. This means that mods can avoid “dry hits,” and even if you fire your device with almost nothing in the tank it won’t “overcook” your juice or burn the coil’s cotton. In normal use it gives you more consistent performance because it levels out the usual spikes and drops in temperature.
What coils are used for TC?
The most common coil materials for TC vaping are nickel (Ni200), titanium (Ti) and stainless steel (SS), and to work well in TC mode, your mod needs to know which one you are using.
What is a preset wattage?
Preset wattages. Preset wattages are basically like storing your most common settings for easy recall later on. For example, you might have a sub-ohm tank you like to use at 60W, a Mouth-to-Lung device you run at 25W and a rebuildable you vape at 50W.
What is super player mode on Vaporesso?
Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2). This is a really great feature if you build your own coils, because while you’re unlikely to find a pre-made coil with such a low resistance, you may build one of your own that you struggle to use with the hard-coded restrictions on regulated devices.
How does Coolfire Z80 work?
With the Coolfire Z80, you can enter the menu and get the device to prime the coil for you. The device then heats the e-liquid up at 50% of normal power to draw e-liquid into the coil, helping with both flavour and co il life. Neither are advanced, though both are a major step forward in technology.