How to set the perfect curve for your vape coil?
If you’re vaping on an RDA and keen to set the perfect curve for your fresh build, you need to start by finding the temp at which your coil sings. You want to atomize your e-liquid without overheating it; you want to make your coil glow without overheating it.
Should you use custom wattage curves on your vape?
Now, this isn’t a common usage for custom wattage curves since this really might only be an issue if you’re vaping tiny coils at a low wattage, which most of us aren’t.
How does Arcticfox’s Smart Mode work?
If enabled, ArcticFox’s Smart Mode can automatically swap between profiles based on the atomizer’s resistance reading. For example, you might be vaping on a Mouth To Lung atomizer with a 1.2Ohm resistance during the day and sub-ohming at home with a 0.2Ohm dual coil RDA when back at home.
How do I set up Arcticfox?
Start by connecting your first atomizer to your mod. Then, choose “ArcticFox Configuration” from NFE Toolbox’s initial screen. One of the profiles will already be active.
What is Curve mode vape?
Variable Power Curve (VPC) is an advanced function or mode option on some mods. This mode enables the user to customize different power levels (wattage) in set increments, providing a power curve over a puff duration (time). VPC was first introduced about 3 years ago and was only found on a handful of high-end mods.
How do you use a vape curve?
How to use power curves. By setting the first half second for 90W and then gradually decreasing the power to 75-60-50W and finally 45W for the last two seconds you can take advantage of constant vapor production all throughout the inhale. This is particularly useful when using coils and builds with slow ramp up times.
How do I use Arctic fox firmware?
0:243:08How to make a new atomizer profile on your Arctic Fox Firmware AFF ...YouTubeStart of suggested clipEnd of suggested clipSo first thing to do screw in your atomizer. Then what you want to do is have three clicks on theMoreSo first thing to do screw in your atomizer. Then what you want to do is have three clicks on the power button and that'll take you into this menu.
How do you turn on an arctic fox vape?
0:040:55Arctic Fox Firmware - Atomizer Selection on pre-set up mod.YouTubeStart of suggested clipEnd of suggested clipIt's very simple they will automatically come and they'll say SI TI at the top here so you justMoreIt's very simple they will automatically come and they'll say SI TI at the top here so you just click the button main. Button power button three times that will take you into this menu.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What is arctic fox software?
ArcticFox – firmware for battery mods from companies: Joyetech, Wismec and Eleaf, which will give your device a second life by extending their functionality to the level of DNA / YiHi devices.
How do I download arctic fox?
You can download the latest version of Android Studio Arctic Fox from the download page and download the Apple Silicon preview build here. If you are using a previous release of Android Studio, you can simply update to the latest version of Android Studio.
What is the difference between the shortcuts VW and TC?
The Shortcuts VW and Shortcuts TC tabs are identical and similar to the Multi Clicks section. In each tab, you’ll find the same set of options, which allow you to map different functions to button combinations.
Can you use Arctic Fox on a Nuvoton?
You can only use ArcticFox on compatible devices that use the same Nuvoton chipset. Pay a visit to NFE Team’s site and check out the list at the bottom of the home page to see if ArcticFox is compatible with your device.
Does Arctic Fox have a mod?
ArcticFox supports different profiles for your atomizers. Many people use a single atomizer on their mod as their all-day, every-day setup. Some, though, and especially those who treat vaping as a hobby, may turn to different atomizers throughout the day. A Kayfun for MTL vaping at work breaks through the day, a CSMNT for huge clouds when back home in the evening.
What are the advantages of a variable power curve?
VPC can have several advantages over standard wattage mode. If the coil you’re using is a complex clapton coil, this will have a large cross sectional area. An initial high wattage will be needed to heat the coil to vaporize the e-liquid.
How long to heat a VPC coil?
You may want to heat the coil initially for 2 seconds then drop down for another 3 seconds, then increase it again to give you another kick in power. If this is what you want to do then set VPC-1/2 for high wattage (50W), ...
What does 20W mean on a coil?
This means that the power being applied to your coil will remain constant throughout the time you’re pressing the fire button. If you set your wattage to 20W, when the fire button is pressed, 20W will be applied to the coil.
What is a VPC mod?
Variable Power Curve (VPC) is an advanced function or mode option on some mods. This mode enables the user to customize different power levels (wattage) in set increments, providing a power curve over a puff duration (time).
Can you switch between normal power mode and VPC mode?
You can switch between normal power mode or VPC mode if you wish. The settings you’ve programmed will be saved and re-called when you go back into VPC. Equally, if you want to fine tune your power curve or use a different coil/tank, simply amend any of the power levels you’ve previously set.
Eskie ECF Guru Verified Member ECF Veteran
I don't use Arctic Fox so this is a general response for mods with temp control. Temp protection is not a warning. Nothing is broken. The board is simply informing you that the coil reached the temperature you selected and it's protecting your vape by holding that temp for you.
stols001 Moved On ECF Veteran
Yup it is just doing its thing and informing you that it would like a gold star for like, protecting you from the frightening phenomenon of Tank Climate change, and if only everything could be so easy. I don't use arctic fox (that I know of, should be my disclaimer) I'd imagine there MAY be a setting where you can turn that off if you want, IDK.
My Batt Hurts Super Member ECF Veteran
Yes - I use ArcticFox on a Pico and that message means it's trying to control the temperature - it's doing what it's supposed to do.
flavourchaser Super Member ECF Veteran
Depends on the juice I’m dripping, between 190 and 210 Celsius. (On the low end I guess)
Beamslider Vaping Master Verified Member ECF Veteran
If the wattage is set too high for the coil in TC you will see that message a lot. Sometimes it will throttle the wattage enough to get a lousy vape. It is better to set the wattage for the TC just above what the coil would use in Wattage.
Myk Vaping Master ECF Veteran
That means you're hitting the temperature. It's doing what it's supposed to be doing. If you weren't getting "protection" your resistance would probably be set wrong. If you were instantly getting "protection" and no vapor your resistance would be set wrong.
Myk Vaping Master ECF Veteran
I’ve done some monitoring on Arctic Fox, and it’s true: when “Protection” shows up, I’m just below or at the temperature I have set as maximum (provided, of course, that the base resistance is set correctly). Speaking of which: If I’m not mistaken, the base resistance is set for a room temperature which is assumed to be 21 Celsius.
Customization
Different settings, from simple to advanced help you make your device ideal.
Profiles
Are you using multiple atomizers with one mod? Profiles created for you! Profiles will be selected automatically when you install previously configured atomizer.
Integration
Maximum integration with NFE Toolbox, which allows you to configure device via computer, take screenshots and read device sensors data.