It could depend on several reasons as to why it is hard to pull through your vape. Chances are that you have been pulling so hard on your vape that you might have blocked the tank by flooding it. Or maybe the battery is not working.
Why won't my vape tank work?
A failure in the vacuum seal somewhere could be causing vape blockage, etc. depending on where it might be. But if a tank is not sealed well, it won't vape correctly either, so I would check your 0-rings carefully. If that doesn't help if you have a good vape shop near you, they may be able to help.
Why is it hard to pull through my vape?
It could depend on several reasons as to why it is hard to pull through your vape. Chances are that you have been pulling so hard on your vape that you might have blocked the tank by flooding it. Or maybe the battery is not working. However, problems regarding this are simple to identify and troubleshooting as well. 1.1 What is Vape or Vaping?
Can You Vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping. Even when you take special care of your tank, you can never be sure that it won’t get stuck.
What are some common problems with vape pens?
They complain that it is sometimes hard to pull through, even though they have a high quality and top-rated electronic device. Sometimes, their coil seems to burn as though something is blocking it, and sometimes, they pull the liquid concentrate instead of any vapor.
How do you disassemble a stuck vape tank?
Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
How do you open a vape tank?
0:110:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had a hard time opening this until I got two rubber bands. And just wrapped them on the two partsMoreI had a hard time opening this until I got two rubber bands. And just wrapped them on the two parts top and bottom there you have to twist and then you twist opposite directions obviously.
How do you unscrew a tight cart?
3:436:57ROHS iMini How to remove a tank that's stuck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So youMoreSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So you got to put enough grip on this neck. Here.
How do you take apart a Smok?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
How do you remove a stuck vape glass?
3:004:45Removing Glass From a Sticky Subtank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can twist it and your glass should come off what that does just you're playing with thermalMoreYou can twist it and your glass should come off what that does just you're playing with thermal expansion. And contraction. Basically the glass is gonna be warmer.
Why do vape pens clog?
Vape pen cartridges can become clogged when the tiny airflow holes get blocked with oily residue after use, according to Winston Peki, editor of product-review site Herbonaut.
How do you take apart a Smok pod?
0:342:11Smok Novo pod clasp removal demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust kind of wedge it right inside there and just flick the wrist when it comes right.MoreJust kind of wedge it right inside there and just flick the wrist when it comes right.Smok Novo pod clasp removal demo - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you take apart a Smok pod?
How do you take apart a Smok species mod?
1:439:34The SMOK Species Kit! Touch Screen Vape Mod! TFV8 Baby 2 Tank!YouTubeStart of suggested clipEnd of suggested clipStraight glass to on there and it'll hold two mils of juice. But yet in order to get this suckerMoreStraight glass to on there and it'll hold two mils of juice. But yet in order to get this sucker apart. All you got to do is just unscrew it just like all these other sibling tanks the out there.The SMOK Species Kit! Touch Screen Vape Mod! TFV8 Baby 2 Tank!https://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you take apart a Smok species mod?
How do I empty my vape tank?
When it comes to how to clean a vape tank, you first need to disassemble your device. Remove the tank from the battery mod, remove the coil from the tank, and empty out any remaining e-liquid. You'll then want to separate any additional pieces on the tank section, such as the mouthpiece.Nov 12, 2020How to Clean a Vape Device Properlyhttps://www.vape-simple.com › blogs › news › how-to-cle...https://www.vape-simple.com › blogs › news › how-to-cle...Search for: How do I empty my vape tank?
What is Vape or Vaping?
For new learners, vaping is defined as inhaling a vapor created by an electronic cigarette or other vaping specific devices. These are battery-powered devices that have liquid-filled cartridges that usually consist of nicotine, flavourings and other chemicals.
Chances are your vape pen cartridge is clogged
Vape cartridges are prone to become clogged when the airflow holes experience a blockage. It is usually caused by some oily residue left behind in the cartridge after use.
How to fix the problems when they start showing?
Now the question arises of how to fix the trouble when it arises. First, make sure that the problem lies with the airflow and not anything else. Often it happens that the vape cartridge is not producing vapor at all because of technical issues like the voltage, temperature or wattage.
What do I do when the cartridge of the vape is clogged?
If the problem related to your device is not the airflow or technicalities like wattage or temperature, then it is highly likely that the cartridge is clogged. Here is how you can unclog it, by following this simple process.
What do I do when my dab pen does not blow any smoke?
If you are an expert and seeking a more potent high then you will naturally lean towards dab pens instead of vape pens. They both are fundamentally different in various ways. For example, dab pens are manufactured for thicker concentrates than vape pens.
What does it mean when your vape pen blinks three times?
Three blinks of the G Pen’s battery generally indicate a problem with the communication between the G Pen’s battery and the G Pen’s coil. To fix this issue, make sure the connection between the two is clean and secure. If the battery flashes 3 times on each tank / coil, the problem is with the G Pen battery.
Should you turn off your vape?
You should turn off vape batterie s after you are done using them. When you are not using your device, you can save power by turning it off. When the vaporizer is on, it will continue to draw some of the battery power. Turn it off and you’ll save a good chunk of battery life.
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
What is flooding in e-cigarettes?
Flooding is a common occurrence in e-cigarettes. The definition of flooding is getting juice into the air passage of the tank. This can include any point between the mouth piece and the very bottom part that connects to the battery. Each tank has holes in that air passage, where the wicks passthrough.
What happens if you lose a battery?
If certain ones fail or get lost, leaking will occur, in turn flooding the air passage and causing you to have a flooded tank. Other than accidentally losing something, damage can occur when its carried in a purse or a pocket or by over tightening the tank to the battery.
Can a vape tank get gunk?
Yes , I'd say you've probably got gunk somewhere, I'd start with a thorough disassembly and cleaning, including the drip tip. Make sure all your seals (O-rings) are present, and where they should be as you reassemble. A failure in the vacuum seal somewhere could be causing vape blockage, etc. depending on where it might be. But if a tank is not sealed well, it won't vape correctly either, so I would check your 0-rings carefully. If that doesn't help if you have a good vape shop near you, they may be able to help.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
