As we mentioned earlier in the article, a vape coil virtually always burns out because of a failure with either the heating surface or the wick. Here’s how it happens. Some e-liquid ingredients – such as the sugar-free sweetener sucralose – cause residue to build up on your coil’s heating surface over time.
How to make a vape coil?
The first step towards building the coil is to cut the wire from the long wire spool. You can find these wire spools in the wicks and wire section under the Accessories category on the Wotofo website. It is advisable to cut a clean piece of vaping wire from the spool with an approximate length of 3-4inches.
How do I Stop my vape coils from burning out?
You should always start at the lowest voltage necessary and slowly ramp it up over about an hour. Solution: Keep wattage low when breaking in new coils/wicks. The final reason a coil can burn out applies to MODs, portable vaporizers, and e-cigarettes alike, as it has to do with the vape juice you choose to use.
Why is my vape coil not working?
If you are using a vape tank with pre-built coils then check to make sure that the coil's base is connecting to your tank base. Pull the base of the coil out slight then reassemble the tank and make sure the coil is on tight.
When should you replace your vape coils?
It is recommended you replace your coils when your coils acquire a decent amount of buildup. Factors such as vaping frequency and e-liquid selection will determine how quickly your coils become compromised. Check your coils once a day for buildup and replace them when needed. E-liquids are perishable and should be treated like food and water.
Why is my vape shorting out?
When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil. You might get the “Atomizer Short” message, for instance, if unexpected metal-on-metal contact occurs inside your tank.
How do you fix a shorted coil?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Why is my atomizer shorting out?
Coils may have a short Also, some people may misjudge the size of their builds, causing their coil to touch the chamber and short out—and that will cause an “atomizer short” or an “atomizer low” error. Remedy: For factory coils, first make sure your coil is properly seated. If it still doesn't work, try another coil.
Why does my coil burn so fast?
You're Not Priming New Coils When You Install Them Coil gunk is the most common reason why vape coils burn out, and that's a good thing because it's completely fixable through cleaning – there's no real damage to the coil.
How do I fix my vape coil?
How to Clean a Burnt CoilSTEP ONE: SOAK YOUR COILS. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.STEP TWO: CLEANSE YOUR COILS (optional) ... STEP THREE: LEAVE TO AIR DRY. ... STEP FOUR: PRIME THE COILS. ... STEP FIVE: REPLACE.
What is dry burning a coil?
What is “Dry Burning” a Coil? “Dry burning” is similar to pulsing a coil, only this time after the wire has been put to use. Vapourising e-liquid will, after a time, cause the coil and wicking material to “gunk up” with matter that can affect the taste and performance given from your atomiser.
How do you dry burn vape coils?
0:161:18Stopping your vape coils burning in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe most obvious of the tips is to stay top top and don't let your tank run dry it's surprisinglyMoreThe most obvious of the tips is to stay top top and don't let your tank run dry it's surprisingly easy to forget to top up with juice.
What does ohms too low mean on a vape?
'Ohms too low' or 'ohms too high' error message This SMOK warning refers to the resistance of your coil. Most SMOK users will use coils that are made by SMOK so they should not have this problem. If you have a rebuildable atomizer (RBA), it could be that the coil resistance is too low or too high.
Why is my Smok vape saying no atomizer?
“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
Why does my coil taste burnt after 1 day?
If you vape at a wattage that's too high for you coil head, your e-liquid will vaporise too quickly. When this happens, the wick can't re-saturate quickly enough, so the coil ends up burning the wick which causes that unpleasant burnt taste.
How long should coils last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.
What to do if you don't have an external charger for your vape?
If you do not have an external charger, then you will need to rely on your vape mod to identify the issue with your atomizer. If the batteries are the issue then either find the right coil resistance for the batteries (if they are not defective) and device being used or get a new pair of batteries.
How to fix an atomizer short?
How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.
What does it mean when your coil is low?
The coil is too low in resistance in the mod thus displaying the "atomizer low" message. blockquote An atomizer low warning means that the device does not support the atomizer's resistance. This means that your atomizer's resistance is too low and is thus not compatible with your mod.
Why is there no atomizer found?
If the warning is still there after trying to fix it then it could be an issue with the mod being used. A "no atomizer" warning almost always means the coil being used is dead or loosely seated .
Why does my atomizer give me a short message?
There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.
What is an atomizer in vaping?
Posted by Evelyn on August 8, 2019. Atomizers are the heart of vaping. Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.
Why is my 510 atomizer low?
The atomizer low warning means the resistance of coils is too low for the mod being used. The atomizer short warning on your mod displays when the coil is causing a short-circuit.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
Why do vapers not know coil building?
The reason being is that several vapers are actually unaware of what coil building is and how it’s done. Some vapers may hear of coil building but think it’s something that’s impossible for them to do themselves. Having the right knowledge is obviously important but using the right materials and tools is even more crucial.
What is a coil jig?
Coil Jig is a vape tool that helps wrap the coil consistently. Further, it guides the wire to wrap on the rod properly. It is a useful tool to build coils with minimum effort.
How many slots are there in a dual coil atomizer?
In the dual coil atomizers, one must check for the positive and negative slots. There are two positive and negative slots for the dual coil building. In dual atomizers, the airflow remains on the side to reach both the coils equally.
What is coil resistance?
Coil resistance decides the power of the vape device and the amount of power it will draw from the battery. A low resistance draws high power from the battery hampering the safety of it. It can cause a battery explosion. Testing the resistance and identifying the problems prior to using the coil is a must.
What is macro coil?
Macro coil builds: Macro coil builds are the coils with an inner diameter of more than 2.5mm. The bigger inner diameter has a higher resistance and vice versa. However, one can go for a Clapton coil build. Twist two different wire strands against each other to form this coil.
Can you build your own coil?
Own coil building is easy than it looks. In this current post, you have seen the way you can build your own coil. Building a coil can be challenging, especially if you try building complex coils. You need different drills and tools to build such coils.
Is coil building good for vaping?
Coil building is very possible for anyone seeking to take their vaping experience to the next level and It can be incredibly rewarding to take the first drag of your very own build. A perfect coil build needs practice and dedication.
Why is my vape juice sitting on my coils?
Vape juice that's been sitting on your coils is exposed to dust and bacteria. This applies especially to rebuildable atomizers. Dust is inevitable. The longer e-juice has been out of it's sealed bottle, the more prone it is to acquire dust and any other floating particles in the air over time.
Why does my vape coil burn out?
Chain vaping is when a vaper takes multiple draws within a small time frame. Taking multiple draws over a few seconds will dry out the wick faster than it can soak up e-juice.
Why does my new coil pop out?
Running high wattage through a brand new replacement coil will cause it to pop and immediately burn out, since the coil goes from having no current and heat to having extreme amounts of both.
How to fix a vape that tastes burnt?
So the best way to fix the burnt taste is by changing the coil, priming it properly, vaping at a lower wattage, or vaping lower VG juice.
What is a vapebox?
Vapebox is a subscription service that sends out new juice, vape starter kits, and atomizers every month. Every Vapebox is custom tailored to your flavor preferences. If you are interested in learning more or in receiving free vape juice, click the button below.
Why does sugar caramelize on vape coils?
High sugar content e-liquids can present a problem when it comes to long vaping sessions. When sugar is exposed to high heat, it'll instantly caramelize. Since e-liquid is only exposed to high heat on the coil, this means that some sugar will caramelize on the wick.
Why does my new coil taste burnt?
The most common reason why a new coil taste burnt is because it was not primed for enough time. Remember to prime the coil for at least 10 minutes and avoid high power vaping for the first puff. After it is primed and ready, set up your device at a low wattage range.
How to improve vaping coil lifespan?
One way to improve the lifespan of your new coil and its quality of vaping is to prime it. The next thing after fixing your new coil should not be smoking. Not even when you just filled up the tank. Your next act should be to prime your vape because it properly prepares the coil for use.
Why is it important to clean your vape coil?
Some of the benefits of cleaning your vape device regularly are: Makes your tank and coil last longer: Regular cleaning of your vape tank and coil helps to extend their life span while irregular cleaning does the opposite. Better performance: Regular cleaning takes care of built-up residue that may get to the atomizer and ruin the taste ...
How to clean coils on a atomizer?
2 Dry burn the coils as lightly as you can. 3 Remove atomizer from your mod. 4 Place the atomizer under running water while lightly brushing with a tooth brush. 5 Rinse one more time. 6 Dry burn the coil to remove droplets of water.
What are the components of a vape?
Regardless of type, vaping devices all have the following as essential components: 1 A Tank: The vape device tank holds the e-liquid that is converted to vapor. It is usually combined with the atomizer as a single unit. 2 A Coil: This heating element converts e-liquid into vapor. 3 A Battery: The power source of the unit. Some have voltage and temperature control. With box mods, the housing encloses the battery.
How to clean e juice?
Use unflavored liquor like vodka to break down stubborn e-juice deposits. Dampen a microfiber cloth or paper towel with alcohol and clean the affected areas until it is clean. You then wipe and rinse with warm water. You could also use a jewelry cleaning machine to remove stubborn deposits if it’s available.
What is a vape device?
A Tank: The vape device tank holds the e-liquid that is converted to vapor. It is usually combined with the atomizer as a single unit. A Coil: This heating element converts e-liquid into vapor. A Battery: The power source of the unit. Some have voltage and temperature control.
What to do if pod coil is dirty?
The only solution to a dirty or faulty Pod coil is a replacement. The other type is the replaceable coils which take two forms: coil heads for tanks, which are encased in a small metal chamber that contain an absorbent wick; and coils for rebuildables, where you install and wick.
What is the best wire for vaping?
Stainless steel wire is the most versatile among vaping wires. This is the only vape wire that can work both wattage and TC modes, making this wire is ideal for those who are still choosing between TC and wattage mode.
Is titanium bad for vaping?
The use of titanium is a frequently debated topic in the vaping world. Titanium releases titanium dioxide when heated over 1130F, which is toxic to humans. Titanium has a stable TCR though. This means that if you have a functioning TC mod, you need not to worry about titanium dioxide poisoning.
