Full Answer
Why is my vape pen blinking?
The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until ...
How do I know if my vape is charging?
When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery. 2. Fire Button Locked
Why does my disposable vape shut off when I puff?
A disposable vape usually has a built-in puff limiter that will cause the device to cut off if you puff on it for more than a few seconds at a time. That’s to prevent the device from overheating. If your disposable vape shuts off and blinks during a very long puff, the battery isn’t dead – you’re just exceeding the puff timer.
Why is my vape fire button stuck?
Fire Button Stuck Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
How do I reset my Kangertech vape?
Remove the battery and hold down all 3 buttons simultaneously while re inserting the battery. It should show 'Kangertech' as you turn it on if you did it right. This will fix the 9.9ohm reading and the E1 error message. This master reset, also fixed non-responsive power up/down buttons.
What is a Kbox mini?
Kangertech SUBOX Mini-C Starter Kit The SUBOX Mini-C Starter Kit is the perfect starter kit for vapers looking for a sub-ohm and cloud producing experience without destroying the wallet. The KBOX Mini-C 50W Mod can fire up to 50 watts and has a minimum resistance of 0.3ohm.
How do you turn on a Kangertech vape?
To turn ON / OFF press the fire button 5 time in 2 seconds. Squeeze the plastic bottle (Squonking) to get your desired amount of liquid into the tank, press the fire button and vape. If the button is pressed for more than 10 seconds the unit will automatically shut down. Release the button and fire again to reactivate.
How do you fill a Kangertech tank?
0:121:58How To Fill The Kanger TopTank Mini Top-Fill Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the top tank mini in vertical position with the drip tip on the top unscrew.MorePlace the top tank mini in vertical position with the drip tip on the top unscrew.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
What does it Mean when your Vape Pen Blinks
Vape Pens will blink for a variety of reasons from dead batteries and severed connections, to a coil needing to be connected, replaced and so much more. And there is no universal blinking formula that you can look at to find out what is happening when a vaporizer starts blinking this or that color, this or that many times.
Vape Pen Blinking 3 Times
A wide variety of vape pen lights will blink 3 times. There are a few possible reasons for which this can occur. Sometimes the light will blink 3 times after the after turning the vape power on or right before shutting it down.
Vape Pen Blinking 10 Times
If a vape pen is blinking 10 times it is very likely that the PCB chip, aka the brain of the vape is telling you that the battery is dead. Eventually there will not be enough power to even see this sequence of blinking, but if you happen to come across the 10 blinks, it is time to get a new vape.
Vape Pen Blinking Guide – Find your Vape Pen Below
Is a vape pen blinking 3 times, 4 or maybe even 10 times? Vaporizers can’t talk to us, so engineers have designed the chips that operate them to communicate with us via blinking lights. With all of the different vaporizers in the market, there is no universal blinking light language.
Why is my Vape Pen Blinking Blue or Other colors
If your Vape Pen is blinking a certain color when you try to operate it, the number of blinks is what you want to pay attention to and you can reference the user manual or use our Vape Blinking Guide above to find your vape. The number of blinks can mean a variety of things, including issues with a battery, coil or something else.
Vape Pen Light Meaning
As we said above, the exact meaning of the light color and blinking sequence will vary from vape to vape. It is always best to consult the user manual to know exactly what is going on with the vape. A good rule of thumb is that the light color is likely an indicator for heat or voltage setting.
Why does my Vape Pen Blink when Charging
Ultimately it depends on the vaporizer in question so you should always consult the user manual first. If the vape is continuously blinking when it is placed on the charger, then it is likely that the vape blinks to show that it is charging. And when completely charged, that blinking usually stops or stays constant.
Steve Parry Super Member ECF Veteran
You might need to pull the positive post up in the center of the 510 connector. You can use a flat head screwdriver or a paper clip or something to just gently lift up around the edges. If it gets pushed down and touches the metal around it the device is shorted our and won't work properly.
Mikaelsfm New Member
You might need to pull the positive post up in the center of the 510 connector. You can use a flat head screwdriver or a paper clip or something to just gently lift up around the edges. If it gets pushed down and touches the metal around it the device is shorted our and won't work properly.
Steve Parry Super Member ECF Veteran
The battery might be wasted then. Since it's doing it with or without the atomizer attached, if it's not shorting at the 510 it could be the wiring inside or the battery could just be done.
r77r7r ECF Guru ECF Veteran
Try plugging the charger in first, then slowly turn the battery on and stop when you get the correct color of light on the charger.
stols001 Moved On ECF Veteran
I am going to (guess) that your battery may be toast and need replacement. Intermittent, slightly fixable problems that show up the way yours does tend to make me consider something loose electrically, or just your battery in the process of dying.
chellie Ultra Member ECF Veteran
The battery might be wasted then. Since it's doing it with or without the atomizer attached, if it's not shorting at the 510 it could be the wiring inside or the battery could just be done.
BrotherBob ECF Guru ECF Veteran
It was working fine but suddenly his burning light started blinking 15 times (and not burning). Stayed that way for three days (I spent some days out) and when I came back I turned it on again and it was the same way. I cleaned the inner part and it was working again! 1 day have passed and the problem is back.
