“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
Why does my vape have a burnt taste?
· Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil. To check the coil for issues, you’ll first want to clean it. To do this, you’ll have to take the tank apart as if you were changing the coil .
Why does my vape Burn my Lips?
The no atomizer message appears when your vape mod is unable to read the resistance level of your coil. ·The tank is not screwed inadequately. If you don’t fully screw in your tank, the 510 connectors on your mod and tank will not make contact. Whenever which will disable power from flowing through your mod.
Why is my vape making a bubbling noise?
· “Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or …
Why does my vape say shorted?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark.
How do you fix a geek vape when it says no atomizer?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
Why does it keep saying no atomizer?
When you get the “No atomizer” or “Check atomizer” message, it means your mod doesn't think your tank – or more specifically, your coil or atomizer head – is attached to the connection point. You'll see the same message when you try to fire a mod without anything attached.
Can you fix atomizer?
Checklist for fixing an "Atomizer short" warning For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil. For tank users, make sure the coil is properly screwed in. Try other replacement coils from the same pack to see if that's the issue.
What is atomizer on vape?
What Is an Atomizer? The atomizer is the component of your vaping device that's responsible for generating the vapor you inhale. Whether you use a vape tank, a rebuildable atomizer or a vape pod, the purpose of the atomizer is the same.
Why is my vape not firing?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Where is the atomizer located in a vape?
Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.
How do you clean an atomizer?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...
How do I change the atomizer on my vape?
3:075:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipWe can remove it with a few simple twists. Grab your replacement coil and begin threading it ontoMoreWe can remove it with a few simple twists. Grab your replacement coil and begin threading it onto the base. Now you can prime your new coil and reassemble the tank.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you fix a short atomizer on a vape?
Use these steps to troubleshoot a “Check Atomizer” error.Remove the tank from your mod. Has e-liquid leaked into the mod's threading? ... Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank. ... Replace the atomizer coil.
How do you clean an atomizer?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...
Where is the atomizer located in a vape?
Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.
Why is my atomizer checking?
Sometimes a check atomizer error can be caused by your coil. If cleaning your contact points didn’t work then you can try reseating your coil. You’ll want to take apart your tank as if you were changing the coil. Unfortunately, this can be a little bit messy and isn’t always convenient to do if you have a considerable amount of ejuice left in your tank.
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
What to do if your pod vape isn't firing?
If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
Why won't my mod work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work. In this quick guide you’ll learn how to fix this common annoyance and you’ll be back to vaping in no time!
How to clean a tank after taking apart?
Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.
Why is my mod reading the new tank correctly?
If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.
Why is my pod not firing?
Dirt or ejuice can prevent a proper connection between your pod and the device and this can cause the device to not fire or to throw a check atomizer/no atomizer error.
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
What causes a vape atomizer to fail?
The center pins can easily cause apparent atomizer failure, particularly when they’re misplaced. The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
How to tell if a vape is malfunctioning?
One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.
What is the pin on a vape?
The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
How to prevent vaping issues?
Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
What tool to use to adjust vape pins?
However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to tell if a vape tank is fine?
Pop a different vape tank on the mod and see if it is showing the same message. If it is then we know that your tank is fine and we need to take a closer look at your e-cig.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
Why is my 510 e-cig not working?
It can be because of the 510 connection, the vape coil itself or the bits in between. If your vape mod can’t detect your atomizer head, then it cannot properly deliver power to it. So your e-cig will throw up that message to let you know that there is a problem.
Why is my vape mod showing the same message?
If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.
How to remove a tank from an e-cigarette?
Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there. Then take a cotton bud, or piece of paper towel and press it gently into the hole on the top of your e-cig.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
What connectors are used in e-cigarettes?
In fact, most of the e-cigarettes on the market are mostly 510 connectors. Of course, other standard connectors have also appeared in the early days. But now, in order to unify standards, electronic cigarettes have adopted 510 connector.
Does Aegis Legend work with Atomizer?
Yes, I found that many friends will have this problem. When we use any Atomizer , Aegis Legend works fine....
Can you replace a coil in an atomizer?
Please make sure that your atomizer coil is working properly. If you can’t judge it, please replace the spare coil for testing. If you replace the new coil, the atomizer can be used normally, then the coil head is damaged.
How to clean a tank when it is apart?
When your tank is apart, unscrew the coil from the base of the tank and clean the bottom of the coil where it screws into the tank and makes contact. You’ll also need to do the same to the tank, ie clean the area inside the tank where the coil sits. When clean and dry reinstall the coil and reassemble your tank.
Can you use a sub ohm battery on a mod?
Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Why is my mod not finding coil?
The Tank: A lot of the times a No Coil Detected warning isn’t arising due to the mod, it’s because of the tank or atomizer. Even though the mod may have a spring-loaded center pin within the connector, the tank’s 510 threaded connector may not be making contact with that center pin. This can happen for several reasons, such as the 510 connection not being long enough, the tank not being screwed in enough, the pin on the tanks connector not protruding enough from the connector, or a simple case of there being grime and debris that has lodged its way into the connector, preventing the two parts to making a solid connection.
How to clean a solid connection?
Use alcohol and clean the bottom connection to ensure there isn’t any debris that could prevent a solid connection.
Where to inspect tank coil?
Inspect the bottom base of the tank, where the coil makes a connection to the base, and make sure the area hasn’t been disturbed.
Is it rare for a manufacturer to release a product that is faulty?
Although quality control can often raise a concern with the non-stop outpour of products that make their way to the market , it’s very rare for a manufacturer to release a product that is faulty, especially since extensive testing is conducted by GeekVape before these products are set for release.
Is GeekVape a mod?
While GeekVape has a fascinating arsenal of products under its belt, including its popular Aegis Mod series, there are well more than a handful of GeekVape customers that are disgruntled due to a problem that is becoming consistent throughout the series.