The Nautilus X has a quick & clean top-fill tank. Refill your 2ML tank in literally only seconds. You can drip, drop or pour your vape juice into the Nautilus X tank and be back vaping in no time.The Nautilus X coils are now rated at 1.5Ω (14-20 watts) and 1.8Ω (12-16 watts).
Full Answer
Is the Nautilus X good for vaping?
This is pretty high for vapers who like to use sub-ohm coils. However, since they made the Nautilus X for mouth to lung hits, it does not need that much power. High ohms also mean the coil heads do not need that much power to produce vapor. In fact, you only need to set your mod to 18 watts for a comfortably warm vape.
How does the Nautilus X coil work?
The Nautilus X coils incorporate U-Tech, the latest coil technology. Vape flows through the U-shaped chamber and passes the Kanthal coils twice before being inhaled. This all-new airflow performance allows for unrivaled vape flavor and e-juice taste. The Nautilus X features adjustable Top-Airflow.
How do I adjust the airflow in the Nautilus X?
The Nautilus X features adjustable Top-Airflow. Not only does the Airflow Control (AFC) help you to change the airflow in the Nautilus X, Adding Top-Airflow ensures your tank will not leak from the bottom over time.
Does the Nautilus X need high ohms to work?
However, since they made the Nautilus X for mouth to lung hits, it does not need that much power. High ohms also mean the coil heads do not need that much power to produce vapor. In fact, you only need to set your mod to 18 watts for a comfortably warm vape. The Nautilus coils have a distinct U-shaped chamber, which is kind of a unique design.
Can you vape CO2 oil?
High-quality winterized CO2 oils are especially compatible with vape cartridges since they do not require any additional thinning agents in order to be vaped out of carts. Because these cartridges contain no additives, the natural strain-specific terpenes (flavors and aromas) of cannabis can shine through.
How do you vape thick oil?
Any decent vape oil containing a high concentration of cannabinoids such as ours is going to be very thick, and therefore take longer to heat and produce vapor than thinner e-cigarette juices. For this reason, its always best to start by pre-heating your oil for 5-10 seconds before using a “cold” cartridge.
What is the difference between live resin and CO2 cartridge?
Cartridges containing CO2 oil extractions will be one of the most “full spectrum” varieties of extraction styles. This is due to the gaseous chemical used to extract. As opposed to live resin extractions, which are typically performed using hydrocarbon gases (such as butane/propane etc), CO2 extractions use CO2!
Can you put concentrate in a vape?
Yes, if they are properly diluted, food concentrate drops can be used for vape juice.
Can you vape thick oil?
With the special requirements for vaping high viscosity extracts, taking advantage of specialized vape pens is your best bet. Popular solutions for viscous oils are dab rigs and sub-ohm vape pens.
What oils can you vape?
What Oils Are Good for Vaping?Essential oils (peppermint, rosemary, chamomile, lavender, and others)Cannabis oils (CBD oils, THC oils, hemp oil)
What's better CO2 or distillate?
Cannabis distillate has a clean and smooth flavor and the user experiences more potent effects than CO2 oil. CO2 oil has a lower price point than distillate and can carry a wider range of cannabinoids and natural flavor.
Is CO2 oil live resin?
Live liquid resin, or LLR, have high terpene profiles for extracts and are flavorful and pungent. CO2 oil is made using plants that have been dried and cured after harvesting. Supercritical cooled fluid CO2 is run through a closed loop system to extract substances.
Which is better cured or live resin?
Health-wise, it is believed that live resins have more superior medical benefits than cured resins. In live resins, the process in which cannabis is subjected to preserves most of the terpenes, cannabinoids, flavonoids, and other compounds.
How do you mix vape concentrates?
There is a recommended procedure for mixing e-liquids:Determine the desired nicotine strength. ... Extract the right amount of nicotine preparation. ... Add the desired flavor concentrates. ... Measure and add the diluent. ... Seal and shake the bottle.
How do you vaporize concentrates?
Get ready to vape: When loaded, screw the mouthpiece back onto the battery/heating chamber. Inhale and enjoy: Press the button on the unit or battery to heat your concentrate. Inhale when the concentrate has been vaporized. Release the button on dab pens or portable vape pens when you're done inhaling.
Can you vape water in a vape?
Yes, obviously you can vape water since it's a liquid with a low evaporation point… and it won't produce any nasty chemicals.
Aspire Nautilus X Review
Let’s cover some of the new details for our Aspire Nautilus X review. We mentioned the top airflow and how the airflow comes through the coil. The Aspire Nautilus X coil is a very innovative design that is said to produce vivid flavor and plenty of vapor.
Aspire Nautilus X Coils
The coils are built at a 1.5 ohm resistance and operate best in the 14 watt to the 22 watt range. The juice ports on the coils are very large and you can actually use a higher VG e-juice, such as a 70% VG. It might give you a bit better performance and flavor with a 50 / 50 blend but that will all be about personal preference.
Aspire Nautilus X Features
Next up in the Aspire Nautiuls X review is all the technical stuff. So, now for my insightful technical description complete with fancy descriptive language. The Nautilus X vape tank is small. I might also say diminutive, modest, little or mini. I do have a way with technical language!
How to replace a coil head on a Nautilus X?
To replace the coil head, you just need to disassemble the tank. Then, carefully pop off the glass tank, and then unscrew and replace the coil head. Just like the Cleito, the drip tip of the Nautilus X does not come off. On the other hand, it does come with a plastic sleeve that will keep the drip tip relatively cool.
Where does the air go in a Nautilus coil?
The Nautilus coils have a distinct U-shaped chamber, which is kind of a unique design. First, the air goes inside the top airflow holes near the drip tip. Then, it goes down the side chamber of the coil head, goes into the inner chamber. Finally, it goes out the chimney.
What is the name of the MTL tank?
A few MTL tanks did come out in the past couple of years. However, the one that clearly stood out was the original Aspire Nautilus. Recently, Aspire gave their popular MTL tank an upgrade. As a result, they rebranded it as the Nautilus X.
How big is the Aspire Nautilus X?
The Aspire Nautilus X is quite a stout little tank. The diameter of the tank is 22mm, which means it can easily fit in any mod, even ones like the iStick Pico. The Nautilus X also has quite a low profile; it is just 45mm tall, which is actually smaller than most 22mm RDAs. The tank has four main pieces.
How many ohms does a Nautilus X have?
They rate coil heads that come with the tank at 1.5 ohms. This is pretty high for vapers who like to use sub-ohm coils. However, since they made the Nautilus X for mouth to lung hits, it does not need that much power. High ohms also mean the coil heads do not need that much power to produce vapor.
How much juice does the Nautilus X hold?
In fact, it can only hold around 2ml of e- liquid (in compliance with TPD regulations). However, since the Nautilus X is an MTL atomizer, that amount of juice will last you quite a long time. It’s true that the Nautilus X only has a three-piece construction.
What is a Nautilus X?
The Nautilus X is a mouth-to-lung device. This means, it aims to mimic the same kind of experience that people used to get from taking a drag from a cigarette. Therefore, in that regard, this tank atomizer performs beautifully.
What is the best device to vaporize cannabis?
Here are some of the popular devices used and their main features: Vape Pens. These battery-powered devices are great entry-level cannabis oil vaporizes. They usually work well with both, oils and waxes. Oils used in vape pens should be liquid enough and not thick to prevent any burnt oils and smoke.
What is the difference between vaporizing cannabis flowers and vaporizing cannabis oils?
While vaporizing cannabis flowers (dry herbs) gives you a wide range of flavors depending on the strains of your preference , cannabis oils , on the other hand, provide more intense flavor.
What is a desktop vape?
Desktop Vaporizers. These are the most versatile cannabis vaporizers and perfect for home use. They have multiple features that you can tweak to suit your personal vaping style. The downside, they are not discreet and portable due to their larger size.
What is cannabis oil?
Cannabis oils are sticky, gum-like marijuana concentrates extracted from dried buds. It is made up of cannabinoids, such as phytocannabinoid tetrahydrocannabinol (THC) and Cannabidiol (CBD). THC is the prime compound of cannabis that makes it a psychoactive drug.
How to get a chime out of a vaporizer?
Fill up the tank or atomizer with your cannabis oil. Heat up the oil by continually pressing the firing button. You can also set the temperature of your vaporizer, if this feature is available. Once the vaporizer reached its ideal temperature, you’ll notice that the vapor starts to chime out of your vaporizer.
How is CBD oil made?
The most effective way of manufacturing cannabis oils is by solvent extraction. Ground dried buds are mixed into the oil, completely dissolving the cannabis buds.
What is the most commonly used type of cannabis oil?
The most widely- used type of cannabis oils is CBD-based. These types of marijuana concentrates contain very little THC and a significant amount of CBD. As stated above, CBD is the non-psychotic component of marijuana concentrates and has numerous medical properties.
What is CO2 Oil for vaping?
CO2 (Carbon Dioxide) is one of many extraction methods for creating oils from cannabis plants. CO2 is a gas, but with enough pressure, it can change to its liquid form. The cannabis plant is processed in the liquid CO2, which allows the cannabinoids and terpenes to separate from the remaining plant material, creating a concentrated oil.
What is distillate?
Distillate is a highly concentrated extraction method to separate terpenes and cannabinoids from the original cannabis plant. Distillate can form either CBD or THC concentrates from extracted cannabis oils.
Vape pen 101
Vape pens, also called weed pens, are quickly becoming a popular way to consume cannabis. The hand-held device is used to smoke cannabis concentrates such as oils and distillates. Vape pens will heat the oil to produce vapour that’s inhaled through a mouthpiece.
What is the difference between C02 and distillate?
Both CO2 oil and distillate concentrate are great ways to mix in some added potency to your cannabis consumption. But beyond that, these two products are about as comparable as apples and oranges.
The best vape products
To decide what’s better, CO2 oil or distillate, some cannabis consumers say it’s best to try vaping with different products. Kootenay Botanicals has a variety of locally sourced vape accessories and products for vape newbies and connoisseurs alike.
What is CO2 oil?
CO2 oil is a term used to describe any cannabis concentrate created by CO2 extraction. CO2 extraction relies on a closed-loop system and the chemical is purged from the final product.
How to use CO2 oil
CO2 oil is vaporized. It can come in vape cartridges and consumed through a vape pen, or as a concentrate, or dab, in the form of a shatter or wax. If in one of these forms, CO2 oil needs to be flash vaporized and consumed through a dab rig.
Urlacher78 Full Member ECF Veteran
just curious new to vaping just purchased the nautilus x tank. It comes with 1.5ohm (16-22w) an a 1.8ohm coil preinstalled rated (12-16w) haven't tried the 1.5 coil yet the 1.8 coil vaped great at 14watts an now i get a burnt taste an it's only 2 days old I turn it down to around 10w an it seems to do ok.
djsvapour ECF Guru ECF Veteran
I don't use this tank, but generally speaking if you use a higher resistance coil you should not try to match the watts of the lower resistance coil (as you have to effectively increase the volts).
dobroeutro Ultra Member ECF Veteran
I agree with the above... I don't have this tank either, but from my personal experience, 1.8 coil/8-10w & 1.5 coil 12-14w. At these wattages, I think you'll get good performance & longer lasting coils. YMMV...
BrotherBob ECF Guru ECF Veteran
just curious new to vaping just purchased the nautilus x tank. It comes with 1.5ohm (16-22w) an a 1.8ohm coil preinstalled rated (12-16w) haven't tried the 1.5 coil yet the 1.8 coil vaped great at 14watts an now i get a burnt taste an it's only 2 days old I turn it down to around 10w an it seems to do ok.
SteveS45 Moved On ECF Veteran
I have the Nautilus X tank and I only use the 1.5Ω coils in it and never tried the 1.8Ω coils in it. They say that the 1.5Ω can go up to like 22-25 Watts but I find they deliver a good vape at 14-15 watts maximum. I have fired the 1.5Ω at 27 watts by accident and that was one heck of a hot vapor!
SteveS45 Moved On ECF Veteran
I have also never had a leak from my Nautilus X tank or a problem with a flooded coil for that matter. U-Tech coils are good in my opinion but take a bit of extra e-Liquid and some no power pulls to get them primed correctly or you will burn that coil or start it burning so they do not last.
SteveS45 Moved On ECF Veteran
Yes I've researched it and am aware of it's foibles. I just don't understand the leak
