Why is my vape flashing and not smoking?
The more common of these is the connection between the battery mod and the tank: the 510 pin. If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why is my aspire vape not producing vapour?
Taking a draw with a fully charged and seemingly working device only to produce no vapour is an annoying one of the Aspire vape problems, to say the least. This could be down to a couple of problems. Make sure you check that everything is connected tightly.
Why do vape devices get so hot?
However, that is especially true for a vape device because it is designed to generate a significant level of heat. A small, hot metal or plastic box in your pocket, purse, or desk drawer is not something you want to deal with.
Why is my vape pen blinking blue?
Why is my vape pen blinking BLUE? When you pressing power button 3 times continuously, the indicator light blinking blue, it indicates that the vape pen switches to medium mode power output. Why is my vape pen blinking GREEN?
Why does the light on my vape keep flashing?
Generally, a blinking light indicates that the vape pen is trying to warn you that your device is not working as it should or the battery is low.
Why does my Aspire PockeX keep flashing?
Short Circuit Protection: If the PockeX detects a short circuit the device will immediately cease firing and the light will flash both blue and pink two or three times.
Why is my Aspire spryte blinking?
When the Spryte is fully charged the LED will flash blue and red 20 times then remain off. Before using nicotine containing e-liquids the user should read the following information carefully.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
How do you know when aspire PockeX is fully charged?
Using the included cable, charge via a USB port. The light at the bottom will turn red to indicate it's charging and will turn green once it's fully charged.
What is short circuit protection vape?
When an electrical short happens the built-in protection circuit on a regulated MOD will kick in, and this will stop your e-cigarette from working.? This indicates that there is something wrong so when you hit the fire button it will not vape.
How long does aspire PockeX take to charge?
4 hoursHow long does the Aspire PockeX AIO battery take to charge? If you are charging it for the maiden time, it will take 4 hours to get the 1500mAh battery up to full charge.
Why is my Aspire K Lite flashing purple?
If the light flashes red – or the device doesn't do anything at all – the battery is dead. Charge the Aspire Tigon AIO fully before vaping again. If the light flashes purple, the device has detected a short circuit. Replace the atomizer coil and confirm that the coil and pod are installed correctly.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
Why is my display light blinking?
One of the most common reasons for a blinking display light is luckily also one of the easiest to resolve. It is possible that the activation button (the button you press to activate the device) is simply stuck in a slightly pushed-in position.
Why is the Rocket 3 LED red?
For instance, the status of the mod’s battery is conveniently communicated as the LED light changes from green to red as the battery discharges. A low battery that requires immediate attention is pointed out by seven flashes of the LED. And, a short circuit causes the device to flash three times and shut down.
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
What does it mean when your vape pen blinks blue?
(at least 30%) When you pressing power button 3 times continuously, the indicator light blinking blue, it indicates that the vape pen switches to medium mode power output.
Why does my vape battery flash when I press it?
If your fully charged battery or device flashes when pressed, there may be a 'short' occurring or the protection measure to prevent the battery from shorting is being activated. This can be caused by a variety of things, but the most common issue is liquid on the connection thread or battery posts (depending on what type of vape you have).
Why does my vape juice leak?
If these methods do not work, there is a chance that vape juice has leaked into the battery housing unit. This is possibly caused by using a high-PG nicotine salt or traditional vape juice. High-PG liquids are less viscous than VG juice and are more prone to leaking out of a Suorin Air pod into the inner battery housing.
Why is my Juul blinking yellow?
Juul Blinking Yellow. A Juul blinking yellow will occur under normal circumstances after you use your Juul or activating the battery check by tapping the device twice (in some instances by accident). It indicates a medium battery.
What to do if your Juul won't charge?
If your Juul won't charge, then you may need to clean the base of the Juul device with an alcohol swab to remove gunk that accumulates from normal usage. If the problem persists, you may need to buy a new Juul USB charger or replace the device itself.
Why is my Juul not firing?
Another cause of your Juul not firing could be due to the connection not being properly secured. Pop out your Juul pod and check to see if the two metal tabs stick out enough to make solid contact with the battery.
How long does the Juul LED stay on?
The Juul LED will typically stay on for around 8–10 seconds after using the device and is perfectly normal. Try shaking your Juul back and forth to enter "Party Mode"!
Why does my phone auto fire?
A fried chip or switch is one of the most common causes of auto firing. If you’re able to dismantle your device, look for any signs of damage on the switch and chip. You may not always be able to see the issue visually, so it may be a good idea to have them replaced regardless.
Why is auto firing dangerous?
Auto firing can cause a battery to continue venting until it reaches an explosion point. This can lead to dangerous fires and potential injuries and is the biggest reason that auto firing should not be taken lightly.
What is auto firing?
The term “auto firing” refers to a vaporizer that is firing, but without the user pressing the main fire or power button. The device is often being stored in a pocket, purse or drawer when it happens, not even within reach of an accidental button push.
Is it bad if your vape is firing on its own?
If your vape is firing on its own it can be a nerve-wracking experience, and a dangerous issue if left unchecked. Even if you’ve never had to deal with this scenario, it’s important to know the signs, possible causes and how to handle it. Here’s a helpful guide to understanding auto firing, as well as some tips for troubleshooting your box mod ...
Can you stop auto firing?
There are a few minor changes that could stop the auto firing and protect you from a potentially dangerous situation. However, first and foremost, you should consider your safety. If you’re a beginning vaper, you might not want to venture into repairs at this point.
Can you remove batteries from a mod that has been auto fired?
Even if you believe that you have successfully made the necessary repairs, always remove and store the batteries when your mod is not in use.
Can you leave an auto-fire device unattended?
Never leave a fully assembled auto-firing device unattended, because you never know when it might reach the point of no return. By interrupting the electrical circuit, you can prevent the device from receiving the power it requires to auto fire. Once you’re prepared to examine the device, try these steps:
vgodbabyy Full Member
so I have an old aspire pockex that I’m trying to get to work. It doesn’t fire or anything, yet the fire button lights up blue when I hold it down. Is it just a connection issue? How do I fix this? The battery is fully charged and has been for quite some time now
OhmAlone Full Member
Is it possibly locked? Try hitting the fire button five times and then try
Baditude ECF Guru ECF Veteran
The only thing I can think of is the battery is old and no longer holds enough charge to fire a coil. Or the chip is malfunctioning. If you have a new coil, try that.