what will vape salts do to your coil

by Dr. Brenden Wolff Published 3 years ago Updated 2 years ago

Salt nic vape juice intended for pod mod usage comes in high concentrations, with most salt nic e-liquids typically containing 50mg of salt-based nicotine. If you were to use a coil with a very low resistance level while vaping a 50mg salt nic e-liquid, you’d end up with a very harsh sensation on the throat, not to mention a burnt taste.

Full Answer

Can you use the same coils for salt-based nicotine vape juice?

Due to the chemical properties of salt-based nicotine, you can’t use the same coils that you used with your freebase nic vape juices. Salt nic vape juice intended for pod mod usage comes in high concentrations, with most salt nic e-liquids typically containing 50mg of salt-based nicotine.

What happens when a vape coil goes bad?

At some point in your vape sessions, you may get a dry hit or a burnt taste in your mouth due to a coil gone bad. Most vapers have experienced this and will unanimously agree that it’s one of the worst things to ever taste.

What are the benefits of vaping nicotine salt?

Another plus that you get from vaping nicotine salt is that you will be vaping less e-juice than you would in a sub-ohm device due to the amount of nicotine in the e-liquid. Another common reason why vaping may not work for some is the public image that vaping can have when you chuck huge clouds in front of a group of people.

Why is the vaping industry buzzing over nicotine salts?

The vaping industry is literally buzzing over this new product because of the instant rush you get from nicotine salts. This is incredibly exciting as it presents an opportunity for smokers and vapers alike to satisfy their nicotine cravings.

What happens if I put salt nic in my vape?

If you are looking for a direct answer, nicotine salts are neither safer nor less safe. A nicotine salt E-liquid only differs from standard E-liquid because they add benzoic acid to it. This acid might create irritation in the throat and lungs in some cases. Apart from this, there is no such side effect.

Can you use salt nic in a normal coil?

Due to the chemical properties of salt-based nicotine, you can't use the same coils that you used with your freebase nic vape juices. Salt nic vape juice intended for pod mod usage comes in high concentrations, with most salt nic e-liquids typically containing 50mg of salt-based nicotine.

What ohm coil should I use for nic salts?

1.0ohmTHE BEST KIND OF VAPE KITS TO USE WITH NIC SALTS: Things like pod kits and vape pens are perfect, just make sure you're using something with a coil that's at least 1.0ohm in resistance.

Do you need a special coil for nic salts?

For this reason, unless you are an experienced vaper, we recommend you stick to vaping nic salts only in devices specifically manufactured for nic salt vaping. In particular, avoid vaping high nic level nic salts (especially 35 mg and 50 mg) using a sub ohm coil.

Is 50mg salt nic too much?

You Should Start with 50mg if… 50mg is also ideal for those who just prefer a stronger amount of nicotine. If you're seeking out a lot of nicotine and you go with 30mg, you may end up spending more money in the long run because you'll want to vape more frequently to make up for the lower nicotine level.

How many cigarettes is 20mg of nicotine?

20 cigarettesSo according to that, with wiggle room for the fact you'll absorb more nicotine from the vape, a 16mg or 20mg bottle should last you about as long as 20 cigarettes.

Is 20mg nic salt strong?

Nicotine salts are much smoother, at much higher strengths. For example, 20mg nic salts provide a similar throat hit to a 3mg or 6mg freebase liquid. For this reason, nic salts are more popular with vapers that require a high strength nicotine level, but prefer it without the harsh throat hit.

Can I mix salt nic and regular Nic?

Mixing the Two E-Liquids Together in One Tank or Cartridge is a Bad Idea. Be aware, however, that you shouldn't blend together salt nic and freebase nic e-liquids into the same atomizer.

What happens if you put salt nic in a sub ohm tank?

We strongly recommend that you don't use nic salts in a sub-ohm device, as this could make you very sick. However, you technically could get away with a low concentration of nicotine salt (15 mg) with a higher-powered device, depending on your tolerance level.

Can I vape salt NIC at 30 watts?

Typically, nicotine salts perform best within the range of 15 watts to 40 watts. Lower than that range will produce weak hits and an unsatisfying amount of nicotine. Going beyond that can easily burn out your coils and make your e-liquid feel harsh. Keep this wattage range in mind when selecting your temperature.

How long does it take for your lungs to heal from vaping?

After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.

Are nic salts more addictive?

4. Is nicotine salt more addictive? Nicotine salts are potentially more addictive — just by virtue of higher concentration, they might be more addictive than regular eliquid. That's because they lead to higher nicotine blood content in a shorter amount of time, triggering neurochemical reactions faster.

Why do you want to vape nicotine salts?

Here are some reasons why you would want to vape nicotine salts if you have tried vaping before: Haven't been successful quitting smoking cigarettes. You want higher nico tine level strengths without the uncomfortable throat hit. You want less vapor production when you’re out in public. You want to use less vape juice.

Why is vaping so exciting?

What does nicotine salt do to your lungs?

The buzz you get from vaping nicotine salts will be similar to smoking a cigarette and the vapor filling your lungs closely resembles smoke filling your lungs.

What does it mean to vape with a smooth throat hit?

Smoother throat hit. Better nicotine absorbability than traditional e-juices (according to Pax Labs) What this means is that you will be able to vape at higher nicotine strengths while getting a smoother throat hit. It also means that you will be efficiently getting more nicotine than what is currently on the market which explains ...

What is the difference between nicotine salts and freebase?

There are differences between freebase nicotine and nicotine salts but what makes nicotine salts different boils down to two key components: 1 Smoother throat hit 2 Better nicotine absorbability than traditional e-juices (according to Pax Labs)

How much nicotine do you need to vape?

With nicotine salts, high nicotine levels such as 35-50 mg, the throat hit become more comfortable and you don’t have to vape as much to get the same feeling.

How much nicotine is in a nicotine salt?

Nicotine salts use high nicotine strengths such as 50 mg nicotine levels compared to the usual 3 or 6 mg in regular e-juices. Low wattage devices are perfect for nicotine salt because you don’t need to consume as much vapor to get the same amount of nicotine in a high powered device.

What is salt nic vape juice?

What is the best salt nicotine level for a pod mod?

Most pod mod vapers find that somewhere between 1.0 and 1.4 ohms is the sweet spot when it comes to 50mg salt nic e-liquids. In most cases, anything lower will result in a burnt taste and harsh sensation, and anything higher will produce very little vapor, not to mention a weak nicotine hit.

What is sub ohm salt?

Sub-ohm salts are e-liquids containing salt-based nicotine that can be used with sub-ohm devices. The way this works is the salt nic concentrations are far lower than what pod mod users are used to, and so the high wattage levels don’t burn the vape juice.

Can you use salt nic coils with freebase?

First, let’s discuss the rule of thumb when it comes to choosing your resistance level for salt-based nicotine. Due to the chemical properties of salt-based nicotine , you can’t use the same coils that you used with your freebase nic vape juices.

Is salt nic a closed pod?

When salt nic first arrived on the vaping market , the only way to enjoy it was with a closed pod system that utilized a pod cartridge pre-filled with e-liquid, and already containing a coil that was built into the cartridge’s interior. This made it easy for vapers who didn’t want to be bothered to figure out which type of coil to use ...

Can you use mesh coils with salt nic?

Some manufacturers make mesh coils that can be used with salt nic e-liquids in pod mod systems , but most vapers agree that more often than not, mesh coils cause the salt-based nicotine to feel quite harsh. This is because mesh increases the heating surface area, which can actually burn the nicotine compounds.

How does a vape coil work?

A vape coil becomes extremely hot, extremely quickly. A cotton wick is wrapped around the coil, and the coil almost instantly vaporizes all of the e-liquid held in the wick. New e-liquid needs to flow from the tank to the wick, thus keeping the wick wet. If that fails to happen, the wick dries out – and dry cotton burns in a fraction of a second. ...

How do you know if a vape coil is dry?

Through the openings, you’ll see cotton. When you vape, your coil’s cotton wick becomes dry and replenishes itself by absorbing vape juice through those holes.

What is the difference between VG and PG in vape juice?

That’s because VG is much thicker than PG.

What happens if you vape until your tank is empty?

If you vape until your tank is nearly empty, in other words, you’ll reach a point at which the level of e-liquid in the tank is below the wick openings. At that point, the wick is no longer replenishing itself as efficiently as it should. If you try to use your tank until it is completely dry, you’ll risk burning the wick.

What happens when you heat sucralose?

When you apply heat to sucralose, it caramelizes and burns. It becomes very sticky – almost like burning sugar – and creates a thick coating on your atomizer coil. The coating grows thicker and thicker until vaping becomes unbearable, and at that point, you have no choice but to replace the coil.

Why are my wicks burning out?

If you look through the top of the coil and see that the metal wires look black and sludgy – not clean and white – your coils are burning out because of coil gunk caused by sucralose residue. If the wires still look white, though, it’s likely that you’ve burned your wick.

What is coil gunk?

Coil gunk is residue that collects on your coil as you vape. Although almost all of the flavoring ingredients used in e-liquid have the potential of creating residue, sucralose is by far the biggest contributor to coil gunk because, unlike most vape juice ingredients, it doesn’t vaporize fully. When you apply heat to sucralose, it caramelizes and burns. It becomes very sticky – almost like burning sugar – and creates a thick coating on your atomizer coil. The coating grows thicker and thicker until vaping becomes unbearable, and at that point, you have no choice but to replace the coil.

Taking Apart Your Device - Step by Step

Removing all the necessary parts of your vape carefully is essential for cleaning and keeping the device in a workable condition. With a Sub-Ohm tank for example, you have the following components:

Deep Clean Your Vape

The last thing you want is the remains of a Platinum E-Liquid with a Tobacco flavour lingering with your new fruit flavoured e-liquid. We’ve all been there! Cleaning your coil can be done in several different ways, but the method depends on how much time you have. The other trick is doing it well enough without putting your health at risk.

How Long Should I Let My Vape Coil Soak?

There is no right or wrong answer. Soaking depends on the amount of time you have before using your next e-liquid. You can start by leaving your device for up to ten minutes to soak the parts individually. However, if left to soak for a few hours, expect better results and the easier removal of certain stains.

How Long Do Vape Coils Last?

Although you can clean coils and tanks, this will only prolong the life of them briefly. Understand that if the coils are burnt beyond repair, no amount of cleaning will help. If discolouration or that burnt taste persists, seek a replacement immediately. With a multipack of compatible coils for your device, a burnt coil is no longer an issue.

How Do You Remove Gunk From the Coil?

This can often happen to rebuildable coils, because advanced vapers tend to go with thicker and higher ratio VG over PG e-liquids, sometimes even 100% VG for the ultimate cloud chasing experience. To try to remove any gunk from your coil before giving them a clean, which is instructed above, dry burn them briefly.

Can You Clean a Burnt Coil?

You can attempt to clean a burnt coil, but only to stall its inevitable end. Chances are even after cleaning them the best you can, they will still need to be replaced if the bad taste remains. If you have an ultrasonic cleaner like a jewellery machine, that’s the best way to know for sure if it can be cleaned after burning the coil.

Can You Clean Coils With Rubbing Alcohol?

Ethanol is the best pure alcohol example to use for cleaning your tank or coils. A cheap vodka soak can also work wonders. However, we advise against using rubbing alcohols like Isopropyl. If any remains on your key components, it could not only damage your health but also alter the device flavour production significantly.

Why are nicotine salts limiting?

Fewer options: Nicotine salts are limiting because you'll generally have to stick to vape pens and pods like JUUL Replacement Pods. The more traditional mods and sub-ohm tanks allow for nearly endless tank/mod combinations—each pair allowing for their own unique cloud production and flavor experiences.

How much nicotine does a vape have?

For instance: vape juices mixed with nicotine salts – while less potent – can reach nicotine levels as high as 50mg. Try vaping something like that in your traditional sub-ohm tank/PG-mixture and let us know when your lungs stop burning.

What is nic salt juice?

To better understand what nic salt juice is, let's compare them to their big brother, freebase nicotine. Without getting too technical, freebase is the purest form of nicotine and is the default "go-to" for most manufacturers. This nicotine solution is simply added to a mixture of vegetable glycerin (VG) and propylene glycol (PG) ...

Does freebase nicotine increase alkalinity?

We won't try to overwhelm you with too much jargon, so let's stick with the basics: pH and alkalinity. Freebase nicotine has a higher pH, which leads to increased alkalinity. This dramatic increase in alkaline causes a harsher throat-hit, thus causing people to vape at smaller amounts than they may need.

Does freebasing with ammonia give you more nicotine?

He found that "freebasing" nicotine-paired with ammonia delivered a significantly larger amount of nicotine (which did wonders for keeping customers hooked). Since we're trying to offer an effective nicotine replacement in vape juices, it only makes sense that we use the best form available.

Does nicotine affect flavor?

Less flavor impact: Those of us who kicked the habit and prefer nicotine-free e-liquids may notice a marked difference in flavor, despite smoking the same product. This is because freebase nicotine affects the liquid's overall flavor.

How long do vape coils last?

I’ve had some coils (like the one I’m using) last me for over four weeks while going through a plethora of different e-juice flavors.

Why does my coil go bad?

The first reason your coil can go bad is due to faulty manufacturing. Since coils are usually hand-made, the possibility for human error will always be there. Even machines mess up every once in a while. If you find that your coil has come defective, you should reach out to the shop or website you bought it from.

How much does a coil pack cost?

Most coil packs range from $10-$20 and come with at least 3 or 5 coils per pack.

Why does my cotton coil get burnt?

The coil ends up getting burnt because it’s dry and now you can’t take a single hit without tasting that terrible burnt flavor, or worse, getting a dry hit that sends you into a coughing fit. It’s at the end of its useful life.

Can e-liquids burn?

Certain e-liquids like dessert flavors and other sweet flavors have a thick consistency that can clog the coils and make it impossible for e-juice to pass through. The clogged coils will build up gunk that eventually burns the coil and renders it useless. The same is true for e-juice that is too thin and watery.

Is it bad to vape on a burned coil?

Is It Bad To Vape On A Burnt Coil? At some point in your vape sessions, you may get a dry hit or a burnt taste in your mouth due to a coil gone bad. Most vapers have experienced this and will unanimously agree that it’s one of the worst things to ever taste. However, vapers are thrifty folk and will try to get as much use out of a coil as possible, ...

Can you change coils when you are traveling?

If you’re waiting for your new pack of coils to come in, if you’re traveling and don’t have a clean fresh coil on hand, or if you’re not near a vape shop, then sure, it’s understandable why you can’t change coils immediately. But if you’re just hanging onto a dead burnt coil to save money, you really should change that coil immediately.

How to keep vape wick from drying up?

Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.

How to make a vape mod faster?

Assemble your tank and fill it with ejuice. Screw your tank on your mod and set aside for 10 minutes. Inhaling on the tip of the tank without firing will speed up the process. For vape mods with wattage adjustment, start from lowest recommended wattage and raise gradually until you find your sweet spot.

How long does a coil last?

Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.

How to know when your coil is done?

Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.

How to start vaping on a pod?

When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.

How to prime a vape tank?

How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.

Why does my e-liquid burn?

Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.