To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What is TC vaping and should you try it?
No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that. Although it’s still not as popular as regular wattage mode, there are vapes for beginners that are making TC much more user-friendly.
What is temperature control (TC) in vape mods?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter.
How do I get temperature control on my vape?
Different vape devices and kits access Temperature Control mode differently, yet the process is largely the same. First off, attach your tank or rebuildable atomiser to your device. Then check that the wattage output of your device is within the defined limits of what your coil can handle, this is usually written on tank coils.
What type of wire does TCTC vape use?
TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L.
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
What wires are good for TC mode?
Wire materials like Nickel 200, Titanium and Stainless Steel are suitable for TC mode, because their resistance value changes “significantly” (in percentage) with temperature and these changes are easier to be detected/tracked by the mod’s regulator chip. On the other hand, Kanthal and Nichrome wire materials are not suitable for temperature ...
What is a joule in TC mode?
Some TC mods use joules for their TC mode tracking procedure (and not only) instead of watts. A joule is the actual unit of the provided -to the coil- energy ( converted into heat). A watt is just a joule per second (power is energy per second).
Why use pure Ti instead of Ni coil?
Many prefer to use pure-Ti instead of Ni, due to its higher resistance (meaning less wraps). Ti is also more durable.
Why is Ni200 used in power mode?
But, that’s why they are used on Power mode (because their resistance is fixed no matter its temperature, so they will consistently perform under constant power/wattage, even with long fire-button’s pressing). Ni200. Nickel (Ni200) wire presents a very low resistance that significantly varies when heated.
Can you use a Ni/Ti coil in TC mode?
Ni/Ti coils are typically wrapped to very low resistances and they should never be used on a mod that is not equipped with TC mode. Ni/Ti coils should never be dry-fired for long or intensively. Ni/Ti coils should never be used in VV/VW modes. As a first-time TC-mode user, better start with SS wire-type coils.
Do cloud chasers need Clapton coils?
Thus, cloud-chasers must use suitable T C Clapton coils (or more “complex” ones) for confronting this (but liquid consumption increases). Pre-wrapped TC-coils are more expensive. TC-wires must be very thin (Ni in particular) to wrap a coil with a very low resistance value, workable for TC-mode.
Do TC mods have to be locked?
Along with choosing the temperature limit of your coil, TC mods require to also set the wattage setting that must be kept locked, under which the mod will appropriately perform its tracking and retention of the fixed temperature limit.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
What does TCR mean in vaping?
Putting it simply, TCR denotes a number that identifies how the resistance of a material changes as the temperature fluctuates. When talking about vaping devices, the TCR refers to how the coil’s (material) resistance changes as the heat increases/decreases.
What is TCR mode?
To put it simply, the TCR mode allows you to adjust your mod to be as precise as possible, especially with the coils and materials that weren’t manufactured to work with your factory set mod. So, if you are experimenting with unique coils, use the TCR mode for safety purposes.
Why is TCR important?
Importance of TCR Mode. It is a known fact that not all materials (coil) respond the same when there is an increase in temperature. The type of alloy in coils is responsible for establishing the connection between resistance and potential heat.
Do you need to know TCR?
There is no need for you to know TCR values and understand the workings of the TCR mode if you intend to vape with pre-packaged coils and mods created from the same brand.
What is TC in vaping?
Lots of new vape mods have Temperature Control (TC) that automatically adjusts the power output of the battery in order to maintain a steady temperature. Not only is TC far safer way of vaping but it is actually far more enjoyable, allowing you to take longer drags to pump out those big oh’s you’ve always wanted to do.
What is the middle ground for vaping?
Titanium or Ti on the periodic table is considered to be the middle ground for vaping. It has a low resistivity, meaning you can build exciting coils that taste insane.
How does a vape work?
How does vape work? (brief and rudimentary guide) Inside your vape is a metal coil. Around the coil is cotton. The cotton is drenched in vape juice. A current (electricity) passed from the battery at the bottom through the coil when you press the main button.
What happens if you run out of juice in a vape?
Without TC, if your vape is running out of juice the power is left unchanged the cotton would start to heat up more or even burn. This is something that wattage based vapers may experience quite a lot as the power does not change and the temperature continues to rise!
How does vaping change your experience?
Depending on the flavour , the entire experience of vaping is changed by changes in temperature. Some flavours of ejuice are drastically affected - in a bad way, while others may come to life with the addition of temperature. With vaping a lot of it is about trying new things -- provided that you’re not putting yourself in danger.
Does SS vape work?
SS works in high power modes, meaning that you could keep your vape at a much higher temperature. It does not get damaged by these high temperatures as it is an incredibly durable material.
Is it safe to use nickel in vapes?
However, Nickel is easier to control and that’s why people still use it - making for a safer vape. Also, if you have an automatic TC system, nickel can be used safely as it should stick to the middle/lower end of the ideal temperature range. Therefore, Ideally, if you have a nickel vape, you are best off sticking in the middle/lower end ...
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
Why do you use TC in vapes?
So, typically TC is used to avoid dry hits and to maintain a consistent temperature in the tank, which may be high or low depending on how you like to vape. Honestly, it's more about avoiding overheated tanks too which can produce byproducts in your vape that may not be desirable.
Can you leave a TC mod on in your pocket?
If it doesn't change much or at all it's probably kanthal. When TC is set up right, you'll never get a dry hit, and you can leave your mod turned on in your pocket. If you hit the fire button and hold it without vaping on it the TC will burn at your set temp until the mod cuts it off at 10s or whatever.
Is Tc wire for Kanthal wire?
Tc is not for kanthal wire and if your coils aren 't identified as the above mentionned then you're only to use it in wattage mode. QcVaper, Oct 2, 2018. QcVaper, Oct 2, 2018. #2. Agree x 3. Like x 1.
