Full Answer
What wattage should I vape with high VG?
When it comes to your VG/PG ratio, you'll want to ideally look at a 70:30 balance here. You could use a 50:50 juice but because you're likely vaping at a higher wattage (anything over 20 watts), using more PG will give a much harsher throat hit.
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What is the best temperature to vape oil?
410°FThe best temperature for vaping CBD oil Vaping CBD isn't much different than vaping THC oil, as higher temperatures tend to produce the most effects. To maximize your experience when vaping CBD, a temperature of 410°F should do the trick.
How do I know what temperature to vape?
Picking a Temperature 200°C- 250°C / 392°F – 480°F is generally accepted as the general range you should be hanging out in. However, if you know that your tank maybe more sensitive or you prefer a cooler vape, it's best to start low and move up until you find your sweet spot.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
How do I get the most flavor out of my vape?
Shake the bottle every now and then to speed up the process. Another option is to place your vape juice bottle in a sealed bag and immerse it in a container full of warm water. When the water has cooled, remove the bottle and give it a good shake. The flavour should be significantly more robust.
What wattage should I vape at 0.4 ohm?
23 - 28 wattFor example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What temp destroys terpenes?
around 100°F.Some terpenes will begin to evaporate off at temperatures as low as 70°F, although most will begin to degrade at around 100°F. This has real effects not only for the taste and smell of the cannabis product, but also its effects.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
How Does Temperature Affect Your Vaping Experience?
To understand why different temperatures can affect your experience, you need to understand the fundamentals of vaping.
Optimizing Your Vaping Temperatures
The temperature that you set your vape will more or less control two individual factors:
Vaping CBD And Cannabis
As mentioned above, different flavour compounds and substances will vaporize at different temperatures.
Safety Note – Best Temperature For Vaping
Note that vaping at higher temperatures, depending on the type of coils you use, can lead to your coil's cotton wick drying or burning out prematurely.
What Temperature Should I Use For Vaping?
In the end, the best temperature to use depends entirely on what type of product you're vaping, and your personal preferences.
What is vape gear?
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
What temperature does a BIC burn?
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad! A normal flame can do so much damage because most cannabinoids begin to boil at half (or even a third) of that 600 ℉.
Vapor Devices For Temp Control
Not all vape mods or e-cig devices are capable of temperature control vaping. If looking for a vape mod that is capable of temp control, look for the TC designation. Also look at the device specs.
Best Mods For Temp Control
There are so many excellent mods for temp control these days! Chip technology has advanced rapidly in recent years. The new Smok Species vape mod is a prime example of a company that has come a long way making better, and more consistent temp control devices. Vaporesso and Geekvape are also excellent.
Best Type Of Coil For Temperature Control Vaping
Nickel, Titanium, and stainless steel all do an excellent job of temperature controlled vaping. However, my favorite is stainless steel. Stainless Steel is the only type of coil wire that works in both TC mode and variable wattage mode.
Vape Juice For Temp Control Vaping
Temp control vaping is done with atomizer less than 1.0 ohms of resistance. The type of vape juice ingredients used for vaping with atomizers less than 1.0 ohms are different than what is used for standard vaping. The best vape juice for temp control vaping are VG e-liquids. It is our view that the best VG/PG ratio is 80 VG and 20 PG.
What temperature should I use for vaporizer?
Those who prefer thicker, denser or more visible vapor should consider vaporizing at temperatures between 210 – 235 degrees Celsius on the ideal vaporization spectrum.
What temperature does vaporization take?
For example, at a lower temperature, approximately 190-210 degrees Celsius, you will receive thin & wispy, yet very flavorful vapor. This is very evident in vaporizers like ...
What is the goal of vaporization?
For a little background information, the goal of vaporization is to convert the compounds and essential oils in your botanicals into vapor, or gas form. This is done by heating them to a certain temperature range, to vaporize efficiently and avoid combustion. Some botanicals have several different compounds ...
What temperature does a conduction vaporizer produce?
Conduction vaporizers tend to produce much less vapor at lower temperatures, especially below 200°C or 392°F. They produce more vapor as you increase the temperature. Stirring is also important with these types of vaporizers.
How long does it take to get vapor out of a vaporizer?
Give it about 10 – 15 minutes of time to fully get up to that level. Then you start vaporizing and will notice that your vapor is relatively thin and has a nicer taste. As the vapor becomes thinner, you can put up the temperature 10 degrees at a time and make up for the thinning of the vapor.
What is a convection vaporizer?
Convection Vaporizers. Convection vaporizers like the Utillian 722, use hot air to generate the vapor. This air is pre-heating before it hits the chamber as you draw. Convection vaporizers can produce better vapor at lower temperatures and a more even cook in general.
What is the first compound to vaporize?
In most botanicals, the first compound to vaporize, as it’s boiling point is the lowest, is terpenoids. Terpenoids are the ‘flavor and aroma’ compounds. Terpenoids, although most noticeable due to its properties, are not the only compound that can be start vaporizing at a lower temperature.
mesamay2003 Super Member ECF Veteran
Unfortunately, I don't think a definitive answer to your question has been determined yet, although there are some studies in progress...
TheotherSteveS Vaping Master Verified Member ECF Veteran
I hate to throw something else in but the addition of flavourings, if they are soluble in either carrier liquid VG or PG or both, will alter the boiling point also and this will vary with flavouring/concentration etc etc etc...
mesamay2003 Super Member ECF Veteran
Oh, and besides the flavor ingredients and temps, we also need some studies on the metal composition of the coil wires...and so it goes.
m00shie Ultra Member Verified Member ECF Veteran
Yea...been doing research...and there are a huge amount of complexity involved when mixing with other liquid such as PG, Nic and flavorings. That's my reason for this thread to see if there's anyone who has any light on this.
What temperature should a vaporizer be?
If you want to get HIGH and activate the THC compounds in a more meaningful manner, you’ll want to keep the vaporizer’s temperature lower – usually below 200ºC (180ºC is a good place to work towards). Obviously, most of how the cannabis effects you will be down to the strain you’re using.
How much does a desktop vaporizer cost?
The best of the best is the Volcano Hybrid Desktop Vaporizer; it retails for $799 and is an utter monster with respect to performance and flavor.
What is a desktop vaporizer?
A desktop vaporizer is a larger, more powerful version of a hand-held, portable weed vaporizer. Desktop vaporizers are mains-connected, so never need to worry about battery life but they’re not exactly portable.
How much does the Arizer Extreme Q cost?
A cheaper, but still awesome alternative, would be the Arizer Extreme Q which retails for less than $200. The Arizer Extreme Q is a whip/balloon-style vaporizer that has tons of settings, a remote control for hands-free control, and amazing performance.
Can you heat up a vaporizer?
When you’re talking about vaporizers, you’re “heating” up the material – not burning it. And the type of temperature CAN and WILL have an effect on the flavor, potency, and overall experience of your medical marijuana. Don’t worry though, there’s no math required.
Is smoking marijuana safe?
Smoking anything – be it tobacco or cannabis – is always best avoided; you’re exposing yourself to a myriad of hazardous chemicals that are linked with hundreds of diseases and illnesses.
What is low temp vaping?
If you’re a wake and baker, low temp vaping can give you the feeling you want, without burning you out for the day. This is also the ideal setting for newcomers and lightweights who don’t want to get too intoxicated. Light euphoria, calming, invigorating. Intense terpene flavor, fresh, citrusy, piney.
What temperature does THC have to be to be ok?
THC, the main psychoactive ingredient in cannabis has a boiling point of 315° F (157° C). You don’t want to go much lower than 325° F (163° C), especially if you want to really feel something. Low temps might appeal to you if you want the best flavor from your bud. It produces a fresh taste, with citrusy and/or piney undertones.
Why is THC stronger at higher temperatures?
The psychoactive effects will be noticeably stronger at these temperatures mostly because more THC is being volatilized. It can be relaxing, euphoric and put you in a meditative state without feeling drowsy. This temp range is an excellent middle ground for the best of both worlds between effects and flavor.
What temperature does THC have to be to be psychoactive?
The boiling point of THC is around 315° F (157° C), so anything lower will produce minimal psychoactive effects.
Why is vapor hotter at night?
This range is best suited for night time sessions because of its ability to induce lethargy, also called the dreaded “couch-lock”.
Is terpene vapor warmer?
In this range, you still get plenty of terpenes, but now with more access to cannabinoids. The vapor is thicker and warmer. You’ll also taste more of the cannabinoids, which can give it a richer flavor. The warm vapor is satisfying for transitioning smokers.
Can a weed vaporizer produce different vapor?
For example, two weed vaporizers set to the same temperature can sometimes produce a different type of vapor. Additionally, each strain contains different levels of terpenes and cannabinoids, which contribute to their smell, taste and effects.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What are the benefits of temperature control?
Benefits of Temperature Control Vaping 1 Better Flavor Control: Certain E Juices perform better at different temperatures. For instance: having a lower temperature might bring out the sweetness more. Or, going higher could bring out richer tones. 2 Fewer Dry Hits: Because the maximum temperature is locked, you won’t get anywhere near as many dry hits – the atomizer just can’t get enough power to do it. 3 Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. 4 You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power). Less power means less E Juice burned.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
