Full Answer
How to fix a vape pen that won’t fill?
Unscrew the vape pen heating chamber. The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place. Letting the pen warm up first helps loosen any residue.
How to unscrew a stuck vape tank?
If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to replace a vape pen coil?
The coil screws into the heating chamber in 2 places. The first screw is at the bottom end of the coil, holding it in place above the battery. The other screw is at the top end, fastening the coil to the wall of the heating chamber. If the screws aren’t in place, your coil likely isn’t either. Take it to a vape pen shop to find replacement screws.
Why is my vape pen not charging?
Problem #2: My Vape Pen Won’t Charge or Draw The most common reason for this is there isn’t proper contact between the battery and the cartridge, meaning your battery can’t fire the heating coil. This can be solved by adjusting the connection plate inside the thread to get better contact with the battery.
What are the holes for on a vape?
These air holes control the amount of fresh air that can 'get in' to your vape device when you push the fire button. If your airflow is open (or 'wide'), then you'll get a large cloud of cool vapour.
Where are the airflow holes on a vape cartridge?
The most common type of airflow comes from a hole on the side of your atomizer. This is the easiest to customise. Most designs come with adjustable airflow control (aka AFC), which allows you to choose the size of your airhole.
What is the dial on the bottom of vape pen?
Variable Voltage Vape Pen Batteries You can switch between different voltages with a dial at the bottom of the battery or by clicking a button to find your preference. The good thing about variable voltage batteries is that they work with almost every 510 threaded cartridges because you can change the voltage.
What are the parts of a vape tank?
The Different Parts of Vape TanksOuter tube: The outer tube is typically made of clear Pyrex glass, which is why you can see through it. ... Base and top caps: On either end of the glass outer tube is a metal piece. ... Drip tip: This is a mouthpiece through which you draw vapor.More items...•
What does opening the vent on a vape do?
The airflow's job is simple, to allow air to freely flow from the coils to your mouth. Most devices have an adjustment ring on the tank that allows you to change the airflow manually – high and low. The higher the airflow the cooler the vape.
How do I make my vape smoke thicker?
Get the Right PG:VG Ratio As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG.
How do I adjust the heat on my vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
What are the heat settings on a vape pen?
And as with regular cannabis vape pens, temperature makes a big difference in your dab pen experience. As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What wattage should I set my vape to?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
What is a tank coil?
Reg DOI: 10.1615/AtoZ.t.tank_coils. Tank coils are not generally used for the continuous heating or cooling of a flowing stream, but are usually applied in the heating or cooling of a liquid contained in a tank on a batch basis. The flow of heat into or out of the liquid, involves unsteady or transient heat transfer.
Why is my vape making a popping noise?
A light crackling or popping noise is a completely regular and benign occurrence. It is simply your vape juice being heated up by your e-cig or vape's coil and turned into vapour. If you can hear this sound it simply means that your vape is working as it should.
Can you vape without a tank?
Vape tanks are an essential part of vape gear. If you're a vaper, then you need a vape tank. But sometimes, vape tanks can leak and cause a mess or even damage your device.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
Is vaping safe?
Vaping is an easy and safe way to consume your cannabis, that’s why more and more people are turning to this method as opposed to smoking it. However, there’s always that fly in the ointment that keeps you from having a great time when vaping.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
How to fix a broken vape pen?
Before throwing away your broken vape pen, try clearing out any debris inside of it to see if that fixes the problem. Start by unscrewing your vape pen's heating chamber and brushing out any loose material. Once you remove the surface debris, dab isopropyl alcohol onto the coil to remove wax and oil.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to clean a pen with isopropyl alcohol?
Pick up a bottle of isopropyl alcohol from a general store or drugstore. Moisten a cotton swab, but don’t soak it. You don’t want the isopropyl alcohol to drip into rest of the pen. Using the cotton swab, wipe down the coil and chamber if they appear blackened or covered in debris. Be gentle when handling the coil.
What to do if your pen won't work?
Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.
How to reassemble a pen?
Set each part aside and in order so you know how to reassemble the pen. The bottom section of the pen is the battery. The part above it connects to the heating element, or coil. Notice how the wires run from the battery to the heating element. Again, make sure the pen feels cool before touching it.
Can you use water to clean a pen?
That wire is the most delicate part of the pen and is most often the cause of a nonfunctional pen. Never use water to clean out the heating chamber. It has a lot of wires, so water will short-circuit it. Water can be used to rinse out the mouthpiece.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.