What is TC in vape mods and how does it work?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What is TCR mode in vaping?
What is TCR Mode? In vaping, the more you get into it, the more it gets a tad more complicated. Most vapers start out with something simple, like vape pens, then as we seek to pursue more clouds, more throat hit, and we decide to upgrade.
How does temperature control work in vape mods?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What is a vape mod?
Customizable coils and tanks: If you’re vaping concentrate material, a vape mod offers a highly personalized experience. A component like a coil can be swapped out at will (provided it’s compatible with the specific device you’ve chosen).
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What is TC NI mode?
TC mode is like a car that allows you to put the pedal right down, but you can also gently tap it to move the vehicle ahead slowly. With some mods you can set a custom curve, allowing you to control the speed and rate at which a coil is ramped up. This is a huge leap forward for the vaping industry.
What do the numbers on a vape mod mean?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What does Smart TC mean on a vape?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What is NI TI and SS?
Stainless steel (SS), nickel (NI), and TI (titanium) are all wire materials. With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.
What does TCR mean on a mod?
Temperature Coefficient of ResistanceThe Temperature Coefficient of Resistance (TCR) This specific TCR value of the wire is kept in mind by the vape mod, allowing it to adjust the amount of power being sent to the coil and thus control the temperature.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How many watts should I vape?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
Is higher ohm better for vape?
The difference between the two is the resistance and the method of vaping you use - standard coils have a higher resistance meaning less charge and juice pass through them, Sub Ohm coils have a lower resistance, less than 1.0ohms, meaning more current can go through.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What temp should I vape e juice at?
420 degrees FahrenheitMany people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What does TCR stand for in vapes?
What is Vape TCR Mode? Vape TCR stands for Temperature Coefficient of Resistance. Wellon Vape experts told Olivia that it’s basically a number that describes how the resistance of metal in our coils changes as it changes temperature.
Does temperature control work on vaping?
Temperature control in vaping devices doesn’t actually measure the heat of the coils, but how easily electricity passes through the metal. That’s why when coils go dry and get warmer, the TC controls kick in.
What does variable vaping mean?
Variable vaping can mean variable wattage, variable temperature, and other technical mumbo jumbo. But perhaps one of the more enigmatic terms you’ve most likely encountered is TCR. We see it as one of the main features of a mod, or you’ve probably seen the term in your mod’s manual. While we appreciate the extra feature, ...
What alloy should I use for mods?
Instead of just displaying “SS” or “Ti” or “Ni”, they should display the exact alloy used like “SS316”. This would at least give users an idea what the mod is tuned for and they can adjust accordingly.
What does SS mode mean?
When SS mode is used this means the TCR is rated for the specific material of their own coils. If Company A’s coils are made from, say, 316 stainless steel, then its mods are tuned for the same material. If you use coil heads on a mod made from the same manufacturer, you probably don’t need to mess around with TCR much.
Is TCR complicated?
TCR may seem complicated, but it need not be. While you can research and learn about all the technical data, what they mean, and how it affects your vape, this can be too much for casual users.
What The Hell Is TCR?
Let’s get the easy part out-of-the-way first; TCR stands for Temperature Coefficient of Resistance and is basically a number that describes how the resistance of metal in our coils changes as it changes temperature.
How Does TCR work?
The simplest way to explain it is that you have the ability to fine tune your mod to be as accurate as possible, even with coils and materials it wasn’t designed to handle straight out of the box. Each manufacturer presets certain alloys into the system and we read them as SS, Ti, or Ni, but they should actually go further in their explanation.
What does TCR mean in vaping?
Putting it simply, TCR denotes a number that identifies how the resistance of a material changes as the temperature fluctuates. When talking about vaping devices, the TCR refers to how the coil’s (material) resistance changes as the heat increases/decreases.
What is TCR mode?
To put it simply, the TCR mode allows you to adjust your mod to be as precise as possible, especially with the coils and materials that weren’t manufactured to work with your factory set mod. So, if you are experimenting with unique coils, use the TCR mode for safety purposes.
Why is TCR important?
Importance of TCR Mode. It is a known fact that not all materials (coil) respond the same when there is an increase in temperature. The type of alloy in coils is responsible for establishing the connection between resistance and potential heat.
Do you need to know TCR?
There is no need for you to know TCR values and understand the workings of the TCR mode if you intend to vape with pre-packaged coils and mods created from the same brand.
Why do you use TCR mode?
Different TCR values must be assigned for different types of coils. This is mainly to keep you and your device safe. Use the TCR mode on your device when using unique coils. TC or Temperature Control has allowed Vapers to more accurately control their vaping experience.
What does TCR mean in a coil?
Well, TCR stands for Temperature Coefficient of Resistance. It relates to the resistance and corresponding heat of a particular type of alloy used in a coil. Less resistance translates into more heat, faster. The type of alloy used in the coil determines the relationship between the resistance and potential heat.
Do you need to know TCR for mods?
So, in short, staying within the comfortable confines of pre-packaged coils and mods should present no need to know any of the TCR values, as the engineers who built your equipment would have already pre-built them into the system.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the advantage of TC mode?
In TC mode, if the wick runs dry the temperature will start to rise, and therefore the temperature protection will immediately cut power to compensate.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What is a vape mod?
Vape mods include functionality that is supposed to enhance vapor flavor, quality, and production. Basically, if you want bigger clouds with more flavor, a vape mod might be the right device for you. These devices do present a more significant learning curve than the simpler alternatives, however, so it’s important to fully understand their ...
When will vape mods be available?
Aug 1, 2019. You’ve likely come across the term “vape mod” while researching vaporizers, although vape mods are less common in the world of cannabis vaporizers. These advanced devices typically grant more personalized control over your sessions but there is a significant learning curve to use them properly.
What is enhanced vapor flavor?
Enhanced vapor flavor: In addition to the denser clouds you can expect from a box mod, many advanced portable vaporizers offer enhanced vapor flavor as well. Vape mods are renown for their ability to promote the most flavorful experience.
What kind of batteries do vaporizers use?
Most portable vaporizers rely on standard 18650 lithium-ion batteries. Vape mods can support larger batteries, including the 20700, 21700, and 26650 batteries. These batteries put out more power than their smaller cousins, allowing for long-lasting performance and powering boosted vapor production.
What is an advanced vape?
As the word “advanced” suggests, these types of devices are only recommended if you are already familiar with vaping and want to kick things up a notch with a more customizable device.
How many watts does a box mod use?
To create dense clouds of vapor with cannabis concentrates, a box mod should at least put out about 150 watts. A higher wattage will drain your battery more quickly, but the overall battery life is related to the milliamp-hour (mAh) rating of your battery.
What does the Omega symbol mean in a vaporizer?
Ohms: The measurement of Ohms, represented by the Omega symbol, refers to the resistance of your coil or heating element. Generally, the lower the Ohms, the more powerful the coil. Understanding the resistance of your coil is key to selecting the correct wattage needed to heat your vaporizer to the desired temperature.
LPearce7 Full Member
If this topic has been covered on this forum, please let me know. I have not been able to find a good guide for this exact topic.
LPearce7 Full Member
I have really been having trouble with my iPV5 in TC mode lately. I have an all SS316L fused clapton on my Herakles RTA-2 and have not been able to use it except under the TC- Titanium mode. In the SS304 mode it reads no-liquid, dry hit. When I put in a TCR, regardless of what number I use (0.00050 to 0.00700), I get the same message.
LPearce7 Full Member
Finally! I just found this on some website. It seems to be working well on my SX Mini Q Class & my iPV5. I think the reason I was having so much trouble is because I wasn't locking the resistance before vaping. After I locked the ohms and set the manual TCR to the value below, it's working perfectly.
Tommy-Chi Ultra Member ECF Veteran
Thank you for the info! I have two Sigelei 213s, and I'll be buying a few more.
Tommy-Chi Ultra Member ECF Veteran
I found the following document. You may want to add your information to it.
What is a vape mod?
Vape mods are the devices of choice for long-term vapers, offering huge improvements in battery life and performance in comparison to eGo-style and (especially) cigalike e-cigarettes, and opening up levels of customization in your vaping experience you can’t get any other way.
What is the best vaping mod?
The Hugo Vapor Squeezer BF is another squonk mod making this list of the best vaping mods in the mechanical class, with a straightforward but effective design and a 10 ml silicone e-juice bottle incorporated into the body. The device runs on a single 20700 or 18650 battery (with the included adapter), and works with any coil over 0.1 ohm in resistance (as a safety feature), with a spring-loaded and gold-plated 510 connection for connectivity.
What is the Caravela mod?
The Caravela is the original “unicorn” mod: the mythical mod that everyone wants but very few can get their hands on. Not much has changed, except now some vapers are willing to pay much more to get their hands on one. Simply put, it's one of the most legendary vape mods in the industry.
What is the Nemesis mod?
The Nemesis is a mechanical mod from Atmomixani, taking over 4.6% of the vote in our mechanical mod poll and comfortably ranking as one of the top vape mods on the market.
What is a SMOK mag baby?
The SMOK MAG Baby is a gorgeous addition to the Mag family. With aggressive and tasteful styling, it is the ultimate blend of style and substance. Small in stature but capable of fierce performance, this conveniently sized hand-held vape mod is the picture of ergonomic perfection. Shaped for comfort, it fits easily in your hand and offers a crisp trigger action that helps you get the perfect pull every time.
What is a Cthulhu tube mod?
The Cthulhu Tube Mod has the look and operation of a traditional mechanical mod but with the addition of a dual MOSFET chip and in-built protection against short circuits, technically making it a “semi-mechanical” device. The mod has the classic tube shape and comes in either a stainless or black finish, with the logo based on the mythological beast on the ring near the bottom-mounted switch. The mod runs on either an 18650 or 18350 battery, with the tube splitting into two sections so you can reduce the size for a smaller battery. It performs excellently, and the simplicity of the device is a huge selling-point, as well as the very low $35 price-tag.
What is a regulated mod?
“Regulated” mods: A regulated mod is any type of mod (e.g. box or tube) that have some type of internal regulation to allow for safety cutoffs, adjustable and consistent power output and so on. The vast majority of mods sold today are regulated mods.
