When you receive the No Coil Detected warning and it’s an issue related to the mod, it’s often an issue with the center pin in the 510 connector. Since the pin in the Aegis Legend is spring-loaded, the only way the mod can be the cause of the issue is if the pin got stuck in its lowest position somehow.
Why does my vape tank say no coil detected?
The Tank: A lot of the times a No Coil Detected warning isn’t arising due to the mod, it’s because of the tank or atomizer. Even though the mod may have a spring-loaded center pin within the connector, the tank’s 510 threaded connector may not be making contact with that center pin.
What does “no coil detected” mean?
You may very well see a No Coil Detected warning on your device, and it’s possible that it isn’t a problem with your mod, it isn’t a problem with your tank, but instead a problem with the coil head. You see, this No Coil Detected warning is all about a connection issue, so somewhere there are two pieces that aren’t making a solid connection.
Does geekvape say no coil detected?
Since there are tons of GeekVape customers being affected by this GeekVape No Coil Detected warning, and unfortunately, a lack of customer support, Guide To Vaping feels the need to do what it does best, which is to provide vaping content that’s designed to help vapers.
Why is my Pod vape not working properly?
In addition to dirt and ejuice potentially causing a bad connection, ejuice can also get into the circuit board of some pod vapes and cause them to malfunction. If you see a lot of ejuice under the pod in your device, this could potentially be the reason it’s no longer working properly.
How fix a vape saying no coil detected?
It has to be seated right inside your tank to make a proper connection to your vape mod. Unscrew the coil and screw it back in again, making sure it is fully screwed in and there is no cross threading. Now try the tank on your mod and see if this has solved the problem.
Why is my coil not working?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How do you reset the coil on Aegis legend?
GeekVape Legend 2 Menu Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Press and Hold Fire & + button – Brightness Up.
How do you clean a vape coil?
How to clean your CoilLet your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours.Place it under the tap and rinse.Rinse once more with some distilled water.Blow air on the open side of your coil to force water to the wicking holes.Set it aside until all water has evaporated.
How do I fix my vape coil?
It's quick and easy to do:Take your new coil and apply 3-4 drops of your e-liquid directly to the wick.Set aside and wait for roughly 10 minutes.Screw the coil on to your device.Fill your tank with your chosen e-liquid and screw it on to your vape.More items...
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
Why is my aegis vape not working?
Geek Vape Aegis Solo Not Working If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.
How do you reset aegis?
On/Off : 5 clicks of the fire button. Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Brightness Up: Press and Hold Fire & + button.
How do you prime a vape coil?
To prime a new coil, simply fill your tank with e liquid and leave it to stand for a few minutes before vaping. As above, this will allow the cotton inside your new coil to absorb plenty of e-liquid ready for that first, tasty vape.
How long does a coil last in a vape?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
How many puffs Should a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
How much does a coil cost for a vape?
$1-5 rangeThe coils—which can come in pods, cartridges, or little metal housings—usually cost in the $1-5 range per. They need to be replaced about once a week (but sometimes longer in between).
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
What is the 510 pin on a circuit?
Make sure the connection points or coil leads are intact and seated properly. Sometimes the connection points will cross over to the opposing polarity. One lead is supposed to touch the positive side of the circuit, which is normally the 510 pin at the base, and the other isn’t supposed to be anywhere near it.
Is it rare for a manufacturer to release a product that is faulty?
Although quality control can often raise a concern with the non-stop outpour of products that make their way to the market , it’s very rare for a manufacturer to release a product that is faulty, especially since extensive testing is conducted by GeekVape before these products are set for release.
Is GeekVape a mod?
While GeekVape has a fascinating arsenal of products under its belt, including its popular Aegis Mod series, there are well more than a handful of GeekVape customers that are disgruntled due to a problem that is becoming consistent throughout the series.
How to tell if a vape is malfunctioning?
One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
What is the pin on a vape?
The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
How to prevent vaping issues?
Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
What tool to use to adjust vape pins?
However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.
How long does it take to read a vaporizer?
Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
What to do if your pod vape isn't firing?
If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
What to do if cleaning contact points doesn't fix check atomizer error?
If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.
Why won't my 510 mod work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.
How to clean a pod from a vape?
Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
Why is my mod reading the new tank correctly?
If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.
stols001 Moved On ECF Veteran
Hmm... I don't have any experience with the smokalien, personally, I believe some folks have had that issue and it could be the 510 pin on the mod being stuck, or even gunked with a bit of juice? I'd try cleaning the mod thoroughly and focusing on the 510 pin and the battery contacts.
stols001 Moved On ECF Veteran
Well, it sounds like something is up with the center pin, at least for that tank. It really shouldn't be, since your tank and mod are both smok products right? But it seems that may be the issue. If your friend can't help, I would perhaps take it to a B&M to see if they can help with this issue-- maybe a small spacer would help?
SteveS45 Moved On ECF Veteran
The center pin on a Baby Beast is NOT adjustable and it sounds like a problem with the coil or the contact in the base of the tank.
YKruss Ultra Member ECF Veteran
I have couple tanks that have short 510 connections and any mod I put them on will scream "No atomizer" or "Check atomizer".
Gahh Super Member Verified Member ECF Veteran
You can try taking the baby beast coil out.. Back the positive / base connector on the coil out a 16th of an inch. Screw coil back in and test without the tank on.
Gahh Super Member Verified Member ECF Veteran
Tried everything... what should i do. I dont have money to buy another tank
Gahh Super Member Verified Member ECF Veteran
I have couple tanks that have short 510 connections and any mod I put them on will scream "No atomizer" or "Check atomizer".
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
Cleaning Your Gunky Coils Allows You to Reuse Them
Using a coil that’s covered in sucralose residue is an absolutely awful experience, but there is a silver lining. Under the residue, you’ve still got a perfectly good coil. Sucralose is water-soluble, and that means you can restore your coil to like-new performance simply by cleaning it.
Switching to Unsweetened E-Liquid Can Increase Your Coil Life
So, one way to solve the problem of coil gunk is by cleaning your coils so you can use them again. If you’re open to the idea of trying a different type of e-liquid, though, you should consider switching to unsweetened e-liquid. Although sweetened e-liquids crowd the shelves at most vape shops, e-liquids without sucralose are still out there.
Changing Vaping Devices Can Reduce Your E-Liquid Consumption
If you don’t want to go through the work of cleaning your coils and don’t want to change e-liquids, the next best thing that you can do is reduce the amount of e-liquid you use by switching to a device that generates less vapor.