Full Answer
Why are my vape clouds getting bigger?
When the vapor production increases, the vapor is pushed out of the device quicker and therefore increases the rate at which the "old" vapor can be replaced with "new vapor". Voila! And the cycle continues. The e-juice you use also influences the size of your clouds.
Is it safe to make your own massive vape clouds?
Making our own massive vape clouds can be a blast, but it must be done right. Be smart; stay safe. The rules are that simple. After making the exciting decision to chase some clouds, vaping enthusiasts, also known as “flavor aficionados,” must decide which e-liquid they want to use to do so.
Why do people vape so much at once?
People who vape tend to inhale a lot of ‘vape’ at one go because vaporizer’s give you huge lung hits, unlike cigarettes that only give you mouth hits.
Why does my vape get so hot?
Firstly, if you increase the power of your vape through higher wattages or lower resistance coils, the vapor's temperature increases and may become too hot to vape comfortably. Increasing the airflow allows for more fresh air to come in and cools the temperature of the vapor, making it more comfortable to inhale.
Why do Vapes make big clouds?
Increasing the power of a vaping device or the air-flow through the atomizer and over the coil will cause vapour to be produced at a faster rate. 'Sub-ohm' vaping, a style of vaping that uses coils with less than one ohm of resistance, is a vape mod well-known for producing particularly large clouds.
How do I stop my vape from clouding?
So you'd want to consider any or all of the following: lower VG, lower wattage, less airflow and higher resistance. If i've left anything out I'm sure another ape will swoop in. & higher nic juice will mean you do not require so much vapour and holding the vapour in your lungs longer will also reduce clouds .
Why do I get so much phlegm when I vape?
Specifically, the researchers found that vaping with nicotine impairs ciliary beat frequency, dehydrates airway fluid and creates more viscous phlegm. This "sticky mucus" can get trapped in the lungs, which could leave your lungs more vulnerable to illness and infection.
Why is my vape blowing weak clouds?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
Do vape clouds go away?
Vape clouds produced indoors by e-cigarettes break down within SECONDS to allow air quality to return to normal levels (while it takes over 30 minutes for a traditional cigarette)
What kind of vape juice makes big clouds?
The correct mix of PG and VG will allow you to create massive clouds without having a harsh throat hit. E-liquids that have a higher percentage of vegetable glycerin will generate denser, thicker vape clouds than vape juices with a higher propylene glycol percentage.
How long does it take for your lungs to heal from vaping?
After two weeks: your circulation and lung function begin to improve. After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
What are the symptoms of lung damage from vaping?
What are the symptoms of EVALI?Shortness of breath.Cough.Chest pain.Fever and chills.Diarrhea, nausea, vomiting, and abdominal pain.Rapid heartbeat.Rapid and shallow breathing.
How long should you drag on a vape?
The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait.
Does more airflow mean bigger clouds?
Increasing airflow (to an extent) means more fresh air to cool vapor temperature; this not only gives you added cooling capacity making it more comfortable to inhale, but it also increases the size of your cloud.
How do I make my vape smoke thicker?
Get the Right PG:VG Ratio As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG.
Does more airflow use more juice?
Believe it or not, airflow control can also affect how long the vape juice lasts. For example, the coils burn cooler with high airflow control, which means less vape juice is evaporated, while the opposite is true; with less airflow control, the coils burn hotter, meaning much more vape juice is evaporated.
Why is it better to use a large vape tank?
Indeed, it is the larger, the better since producing dense clouds consumes more e-juice. And so to avoid constant refilling or the embarrassment of having your device run out of e-juice while you are vaping, it is best to opt for large capacity tanks. This is because they are the best vape tanks for getting maximum clouds.
What is the beauty of vaping?
The ‘beauty’ of vaping for most vapers lies in the thick, aromatic clouds of vapor that are created. It most cases, only specialized vape devices (sub-ohm) produce such clouds, hence the shift towards such devices. There are other ways around producing such clouds especially if you do not want those specialized devices.
What is the firing rate of Vaporesso Luxe?
It has a rapid stable and safe firing rate of 0.0015. This allows for the quick heating that brings you clouds that are as dense as they are aromatic. Its OMNI board turns off the charging when you are vaping and vice versa while its quick charging feature shortens the charging time and makes it readily available for use.
Why do RDA tanks have dense clouds?
The reason why RDA, RTA, and sub-0hm vaping tanks can produce dense clouds is because of the amount of current that passes through the coils. This is the principle behind adjusting the power settings of your device for maximum clouds. Increasing the power of your device enhances its capacity to vaporize e-liquids.
How to increase wattage of e-liquid?
Increasing the power of your device enhances its capacity to vaporize e-liquids. Simply adjust the power setting to a higher one. This increases the wattage that flows through the coil, and invariably the quantity of vaporized juice. Start on a low setting and steadily increase the power until the flavor starts to decline or the vapor becomes uncomfortable to inhale. That is the point where you should stop. Moving beyond that might harm your device.
What is a Vaporesso Skrr tank?
Vaporesso Skrr Tank: This sub-ohm tank sports great features; an 8ml e juice capacity and four airflow slots at the bottom. However, the best part is the QF coil system that provides excellent flow for e-juices with high VG content and thick, rich clouds. With this type of tank, dense clouds are not the only thing you blow; the mesh coils also allow you to blow soft, aromatic clouds too.
How to make vape clouds bigger?
If you can increase your vapor production, your vape clouds will naturally be bigger. One way to do this is to boost your device’s power. This allows you to vaporize your e-juice more rapidly. If you vape using a low resistance coil with a powerful battery, your vapor production will increase exponentially. This is known as sub-ohm vaping, which has become a popular trend.
How to make a vape more comfortable?
When you increase your vape’s power by using low resistance coils or higher wattages, the temperature of the vapor increases. This means it can be too hot for comfortable vaping. If you increase the airflow, though, more air can enter the device and this will cool down the vapor’s temperature so you can inhale it more comfortably. This also increases the size of your vapor clouds. When you increase your atomizer’s airflow, more air can move over the coils. When the amount of air passes over the coil increases, the device produces vapor more quickly. As the vapor production increases, the vapor is pushed more rapidly out of your device and is also replaced more quickly with fresh vapor.
How does sub ohm vaping work?
Sub-ohm vaping involves using a coil with a resistance under 1 Ohm. If you reduce the coil’s resistance, more power can pass through the circuit. As a result, e-liquids can be vaporized at a considerably faster rate. Bear in mind that it isn’t the power increase that creates more vapor. Rather, it enables you to receive the vapor more rapidly than if you were vaporizing the e-juice with less power. As the e-liquid is vaporized more quickly, more vapor can be taken in from each inhale.
What is the best vape tank for clouds?
What’s the best type of vape tank for cloud vaping? While smaller vape tanks like the Innokin Zenith D22 are great for everyday, and more discreet use, to get really big clouds, you’re going to need a low sub ohm tank with a low resistance coil. One of my favourite tanks for clouds is the Falcon II from HorizonTech.
How does e-liquid prevent vapour from being created?
This effectively prevents new vapour from being created if your airflow is completely closed off (or close to it ).
How does airflow affect vapour?
The airflow over your coil cools down the vapour, and this makes it condense into liquid droplets. So the more airflow you have, the more condensation there is and the more visible “vapour” (i.e. aerosol) you produce. The extra airflow also “dilutes” the vapour with more air, which has the effect of puffing it out.
Why are mesh coils so popular?
The “fan” mesh coils in the Falcon take the basic formula but improve it by adding a conical shape, which concentrates the vapour before it reaches the mouthpiece. This boosts the flavour you get as well as the improvements to the vapour production that come with any mesh design.
What is the purpose of condensation?
The airflow over your coil cools down the vapour, and this makes it condense into liquid droplets.
Why do you need extra airflow in a tank?
When you increase the power flowing through the coil (in your tank), you increase the amount of heat generated, which is one of the reasons you need that extra airflow.
How many watts does a Geekvape Obelisk 200 vape have?
Although surprisingly compact, the device is powered by two 18650 and can push up to 200 watts of power. It’s also paired with the excellent Zeus tank.
How to make clouds better?
Technique and practice make more of a difference than you would think. Practice makes perfect, and as long as you work hard to improve your cloud chasing skills and stay focused and motivated, you’ll be creating stellar clouds in no time at all! Sponsors. Add.
How many ml of e-liquid can a Hop N Vape hold?
The Hop N Vape KOF RDTA is a rebuildable drip tank atomizer that features an easy to use single coil build deck, a deck with easily accessible filling holes, the capacity to hold 3 ml of e-liquid, and utilizes both side and bottom airflow.
What is cloud chaser?
Cloud chasers are known for having a wicked competitive streak, which means that vape enthusiasts all across the globe are on a mission to learn how they can create huge vape clouds that will intimidate fellow cloud chasers, impress their friends, and leave them with dense, out of this world clouds that are bigger and better than ever before.
What happens if you don't get enough air in a mod?
If your mod isn’t getting enough air, it can result in serious safety issues, but if it is getting too much air, it can cause your clouds to be thinned out, wispy, and disappointingly small. Balance in regards to airflow is key.
How to get clouds out of your chest?
When it’s time to expel your vapor, slowly and steadily exhale so that your clouds come out in large, dense, billowing pools.
What is the difference between VG and PG in e-liquid?
The next thing you should look for in an e-juice is one that is heavier in VG than PG. PG stands for propylene glycol, and VG stands for vegetable glycerin. An e-liquid that is high in PG will provide you with an intense sensory experience, but won’t give you much vapor.
Can you vape without a charger?
Vaping can be done safely as long as you take the necessary precautions to do it right, but it does not come without risks. Make sure to regularly check your vape mod batteries for corroding or damage, and never use a charger that won’t work with your mod.
arkangel Senior Member ECF Veteran
Just trolling for opinions here: While I'm 100% a "to each their own" type person, I was wondering why "insane vapor" is such a big selling point for one device / mod over another?
Kent C ECF Guru Verified Member ECF Veteran
Just trolling for opinions here: While I'm 100% a "to each their own" type person, I was wondering why "insane vapor" is such a big selling point for one device /mod over another?
Allestaria Senior Member ECF Veteran
I have wondered the same thing. I myself get enough vapor from my 901 to "feel" like a normal analog. That is all I'm looking for out of my e-cig. To be as close to the feel of a normal analog.
tony206 Moved On
I think it comes down to personal preference. I prefer the large amounts of vapor production but I can also understand why some wouldn't. I know that some liquids tend to linger in the air longer than others which is also a personal preference once again.
trog100 Moved On ECF Veteran
the history of these things is they didnt produce enough vapour in a reliable consistent way.. an e cig is just like a real cig.. vapour is just like smoke.. a person needs "enough" and needs it in a reliable way..
Brachinus Super Member ECF Veteran
Vapor doesn't taste or feel quite like smoke, so visible clouds of vapor provides tangible feedback that the unit you bought really is working.
Kent C ECF Guru Verified Member ECF Veteran
P.S. I don't know where to get it, but I recall reading that there's a company that makes e-liquid specially designed for "stealth vaping," like on a plane, where plumes of smoke-looking stuff would be inappropriate. And of course if you hold it in and then blow it down your shirt there won't be much visible vapor no matter what you're using.