Q: How can I turn off the Crafty? A: Press the on/off switch for half-second. Wait for the chamber to cool down before you pack it up again.
Can I use the crafty vape without the app?
A: Yes, absolutely. You can use the unit as is, even without the app. You can just work between the default settings (180°C basic temperature and 195°C booster temperature). If you want to customize your vaping temperature, then it is best to download the Crafty App to your phone. Q: How can I turn off the Crafty?
How do I turn the crafty+ on/off?
To turn it off sooner, press and hold the button for one second until the LED turns blue. We recommend using medium ground herbs with your Crafty+, although any grind will do, including whole herbs.
Can I vape herbs with my crafty?
A: You can vaporize any dry herbs with your Crafty. The obvious one is dry cannabis flowers, Having said that you can vape many other herbs, such as Eucalyptus, Lemon Balm, Chamomile, Peppermint, Sage, and Damiana, etc. Q: I was trying to charge my Crafty but the LED is flashing red and green?
How big is the crafty vape?
A: The Crafty is 110mm (4.3”) high, 57mm (2.2”) wide and 33mm (1.3”) deep, and approximately 135g (0.3lbs). Q: Can I use the Crafty for oils or liquids? A: Yes, as well as for dry herbs. You just need to put the liquid pad into the chamber and put a couple of drops of oil on it and you are ready to start vaping.
How do you turn on a Crafty vape?
Instead, the Crafty uses a single button to control its basic functions. Hold the button for a few seconds to turn it on and start it heating up, as indicated by the flashing red LED. When it's ready to vape, the light will turn green.
How do I turn off my mighty vape?
A: Yes, the Mighty portable vaporizer shuts off after 2 minutes. A vibration will indicate your vaporizer is shutting off. If you are in the middle of your drawing session, the device will register it and most likely won't shut off. If it does, just press the orange button and your Mighty will turn back on.
Why is my Crafty+ flashing blue?
During the charging operation: Blue flashing: the battery is up to 30% charged. Blue, rapidly flashing light: the battery is between 31% and 60% charged. Blue, slow-flashing light: the battery is between 61% and 96% charged. Steady blue light: Ready, the battery is fully charged.
Can you use Crafty+ while charging?
You can still use the Crafty+ while it's plugged into the USB cable, but the charging will stop while the heating system is on.
Can you overcharge Mighty vape?
The more regularly a battery performs, the easier it is for power to flow through its cells. Avoid overcharging (charge your vaporizer only as long as is required to achieve a full battery)
How long does a Mighty battery last?
90 minutesLong-lasting battery life The Mighty utilizes two lithium-ion batteries. It's hard to say how many bowls the Mighty can cook through on a single charge because it doesn't have a session timer, but 90 minutes of runtime is typical.
How long does Crafty battery last?
Battery Life, Charging Options & Charge Times The Crafty uses one lithium-ion internal rechargeable battery which lasts me about 45 minutes of average continuous use or about 4 sessions. The Crafty completely recharges in about 2 hours and also offers partial pass-through charging.
How do I reset Crafty?
If the charger is faulty, you will need a replacement CRAFTY Power Adapter. If this does not help, please reset your CRAFTY by pressing the On-Off-Button for 10 seconds or via the CRAFTY Remote Control app.
How do you check a Crafty battery?
The Crafty+ doesn't have a quick-check battery meter, but there is one on the Android smartphone app, and this web app for iPhone users. When you power off the Crafty+, it will blink blue to indicate the current charge level. The faster it flashes, the lower the charge.
How long does Crafty take to charge?
Charging your Crafty Vaporizer From an empty battery, it takes roughly two hours to reach full charge.
Is it bad to hit a vape while charging?
Whether you can vape or not while your device is charging depends on a few factors. Some vape kits have 'pass-through technology', which means the device can be used while it's on charge. Some examples of devices which have this feature are the Innokin Endura T20-S, the blu Ace and the Joyetech eGo AIO D22.
How long does the Crafty Plus last?
How long does the Crafty Plus' battery last? The Crafty Plus offers around 40 minutes of continuous use on a full charge.
How to tell if a vaporizer is defective?
A: Try charging your vaporizer through a different USB cable from a device like a computer. This will tell you whether the unit or the charger is defective. If the charger is faulty, you will need a replacement CRAFTY Power Adapter.
What is the Crafty app?
A: The CRAFTY App helps you choose your individual temperature settings, personalize the temperature in your own hands.#N#With the Storz & Bickel CRAFTY App, you can also use your smartphone to change the default settings.
How long does it take for a vaporizer to charge?
A: It really depends on how old your vaporizer is, and how high the charge in your battery is at the time you start charging it. It takes about 2 hours to fully charge it though, from 0 to 100%.
Is Crafty a faulty cable?
A: Yes, your Crafty is faulty. Contact Storz and Bickel to register your warranty claim. Q: Hey, my Crafty won’t charge anymore. I tried to use a different cable but I think the issue is with the pin inside the charging port. I believe it got damaged.
Can you use a crafty vaporizer with a car charger?
A: Yes, as long as the Crafty is partially charged. As the vaporizer cannot be operated with the power adapter/car charger if the battery is completely discharged, it is a must to partially charge the battery before any operations.
Can you use a Crafty vape without an app?
A: Yes, absolutely. You can use the unit as is, even without the app. You can just work between the default settings (180°C basic temperature and 195°C booster temperature). If you want to customize your vaping temperature, then it is best to download the Crafty App to your phone.
Can you clean a crafty vape screen?
A: For better airflow, it’s recommended to clean the screens after each use with the super cool brush included in the kit. You may need to remove the screen to be able to clean it properly or if it’s very clogged you may want to replace it. You can get replacement screens for your Crafty at most vape shops.
What to do if you can't fill the oven?
If you can’t fill the oven completely, put the included concentrate pad on top of a small amount of herbs, to take up the rest of the space. The filling aid makes the whole process a lot easier, and included diagrams can help show you exactly how full to fill each oven.
Is Crafty+ good for you?
The Crafty+’s excellent cooling unit has very little resistance, which means you can basically pull as fast or as slow as you like. The default temperature setting is good for easy hits without too much conduction, which is very forgiving, so the Crafty+ is easy to pass around and share.
Charging your Crafty Vaporizer
Storz & Bickel are thoughtful enough to pack the Crafty with the battery charged to 80% - perfect the those of us who are impatient!
Perform a quick burnoff of the Crafty's Oven
Once the battery is fully charged, it is worth performing a quick 'burn-off' of the Crafty's oven. This will clear the oven of any leftover residue from manufacturing.
Packing your Crafty Vaporizer
The Crafty performs best when your herbs are packed lightly. You'll want to ensure that the entire width of the oven is completely covered so air has to pass through the herbs.
Using your Crafty for the first time
Power your Crafty up by holding the power button for roughly 2 seconds.
Using the smartphone app to control your Crafty's advanced settings
If you're a vaping veteran it's likely you'll want to have the full control of being able to set your Crafty's temperature and fine tune your vaping experience.
Operating the device
Upon opening your Crafty+ Vaporizer, as with any vaporizer, it’s wise to run what's known as a burn-off. This is because residue from the manufacturing and shipping process may find its way into your device. The only thing you want to be vaping is your herb of choice!
Cleaning & maintenance
Over time, the device will build up gunk in the cooling unit. This quick guide will help you with disassembling, cleaning and reassembling your Crafty+ vaporizer.
What you need to clean
Most of the buildup in your Crafty+ happens in the cooling unit. You can clean the oven whenever it's convenient (you could use dosing capsules for the oven to make cleaning it easier) but cleaning out the cooling unit and the rest of the device is a process, explained further below:
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
What's in The Box?
- 1 x Crafty+ vaporizer
- 1 x instructions manual
- 1 x micro-USB charging cable
- 2 x drip pad
Charging The Crafty+ Vaporizer
- To charge the device, plug the USB charging cable into the Crafty+charging port. If you need to charge your power bank and Crafty+battery simultaneously, you can do so with the built-in pass-throughcharging. You can also use the device while charging, as long as it'sabove the 20% required to heat the chamber. Since you can't switch out 18650 batteries, the Crafty+ features o…
Operating The Device
- Run a burn-off
Upon opening your Crafty+ Vaporizer, as with any vaporizer, it’swise to run what's known as a burn-off. This is because residue fromthe manufacturing and shipping process may find its way into yourdevice. The only thing you want to be vaping is your herb of choice! To do this, simply tu… - Grind your herbs and load the chamber
When grinding herbs for your Crafty+ vaporizer, we recommend using afiner consistency. If you're working on a budget, using a regulargrinder will do the job - just flip it over until you reach yourideal texture. After grinding, remove the cooling unit connected to the mouthpieceand fill th…
Cleaning & Maintenance
- Over time, the device will build up gunk in the cooling unit. Thisquick guide will help you with disassembling, cleaning andreassembling your Crafty+ vaporizer.
What You Need to Clean
- Most of the buildup in your Crafty+ happens in the cooling unit. Youcan clean the oven whenever it's convenient (you could use dosingcapsules for the oven to make cleaning it easier) but cleaning outthe cooling unit and the rest of the device is a process, explainedfurther below: