If you’re using a touchscreen SMOK mod, there will be a settings icon on the home screen which you can simply tap to access the mod’s settings. If you’re using a non-touch device, just click the fire key THREE times to enter the Settings Menu. Once inside Settings, you can move through the menus using the UP and DOWN keys on the mod.
Full Answer
How do I know if my vape mod is working?
Check the 510 connection. Located on the bottom of your vape tank, the 510 connection is a small metal prong that must maintain proper contact for your mod to work. Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point.
Why won’t my vape turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery. Is it connected to the tank?
Why is my vape screen dark?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.” Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Why is my resistance detection not working on my vape?
A failing resistance detection component is a serious problem with the device itself and might mean it’s time to find a new vape. Try switching out the tank to see if that has any effect. It’s time to upgrade your device’s firmware.
How do I change the settings on my vape mod?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
Why is my geek vape screen not working?
Mod Issue: Screen Works Abnormally If your device have lines in screen, or the whole screen is black or white but still works, please turn off the mod and do a factory reset. This procedure applies to other Geekvape device as well. If it still doesn't work, please click here to contact us.
What should the settings be on my vape?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage. They also tend to produce less vapour and at a cooler temperature. With this in mind, it's upon you to find out what works best for your palate.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do I reset my Geekvape?
Restore Factory Settings: When the device is turned off, press and hold "+" and "-" button at the same time, the screen will display firmware version number, and then press and hold fire button, "+" and "-" button all at the same time to restore factory settings, a prompt as "CONFIG RESET" will be displayed on screen ...
How do I brighten my Geekvape screen?
Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Press and Hold Fire & + button – Brightness Up. Press and Hold Fie & – button – Brightness Down.
How do I set my vape wattage?
Once you know your coil's wattage rating, start at the very bottom wattage. Then, gradually turn it up by a watt or two at a time, taking an inhale in-between. If your vape becomes too harsh or hot or tastes burnt, you know it's a little too high, so turn the wattage back down.
How do I change the wattage on my vape?
0:231:44How to Switch Between Voltage and Wattage Mode on an Eleaf iStick 50wYouTubeStart of suggested clipEnd of suggested clipIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it saysMoreIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it says it's whatever Watts sixteen point five so it's basically just making one more prominent than the other.
How do I change the settings on my Vaporesso?
General Settings:Step 1: Filling the E-juice and install tank. Unscrew the drip tip directly, then you can fill your favorite E-juice through the opening.Step2: Power on the devices. 1)Press the fire button for 5 times in 2s: Power on and off. ... Step3: Choose your mode. ... SMART FUNCTION. ... OPTIONS IN DIY MODE. ... CAUTIONS.
Why has my vape just stopped working?
One of the most obvious, yet still very common, reasons why your vape isn't working is because it has run out of battery. Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on.
How do you fix a vape that doesn't work?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
Why will my vape not turn on?
Try a different cable/plug. If still nothing, then it is most likely an issue with the device itself. Either the charging port is faulty, the battery has died completely or the display/LED isn't working properly. Batteries do degrade over time in any device, as is their nature.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Why do people like Smok mods?
It’s not unusual to hear beginner and advanced vapers alike sing the praises of mods by SMOK, mainly because the brand’s diverse product line-up offers exceptional options to suit every vaping style, experience level, and price point.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What happens if you hit the limit on vapor?
Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
What happens if you work with a rebuildable atomizer?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly.
How to fix no coil on tank?
Confirm that the coil is screwed in well. Remove the tank hand and carefully turn the coil so that it’s screwed in a little tighter . This is one of the most commonly-effective solutions to a “no coil” error message.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do if you have no changes on your vape pen?
If you’ve been clicking the appropriate amount of times but have still seen no changes, you may need to check your charging cable. It is easiest to do if you have another vape pen handy to test it on.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
Why does my pen tank flood?
Several things can cause the tank to flood. Inhaling too hard, shaking your pen like a polaroid, and plain old overfilling are the most likely culprits.
What to do if your charger is connected?
If it is connected, you may need to order a new charging cable. A technician may help you determine the exact cause and avoid purchasing unnecessary extra accessories and components.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
Almost half a year without a cigarette, here's my very modest collection all tidy and organised (for now). What should I get next?
Almost half a year without a cigarette, here's my very modest collection all tidy and organised (for now). What should I get next?
My lungs after 1 year of vaping (after 2 pack a day habit for 8 years)
Lets start from the beginning. I started smoking when I was 16. I didn’t start with regular cigarettes, my choice of cancer was red davidoffs (one of the harshest strongest out there). Since then I have smoked 2 packs a day (sometimes 3) and smoked cigars, hookahs, bongs, basically anything smokable.
Why is my vape not generating vapor?
If your battery isn’t the issue, that doesn’t necessarily mean your coil is receiving power when you try to activate your device. A few different connection-related issues could be to blame for your lack of vapor, and these are generally straightforward enough to fix. The tell-tale sign of a connection issue is that your mod or device is switched on, but it doesn’t recognize your coil or throws up an error message like “no atomizer.” Vape pens may also repeatedly flash an LED to indicate an issue.
Why is my mod not producing vapor?
Mod Not Producing Vapor: Battery Problems. If your device isn’t firing, it might be because your battery isn’t sending power to your coil. If it’s a minor issue, this is the most obvious reason for a lack of vapor and is the simplest to solve. However, serious issues with batteries tend to mean you’ll need a replacement.
How to fix a flooded coil?
Fixing a flooded coil is fairly simple: you can blow down through your mouthpiece to force the liquid out through the airflow holes (or invert your tank and blow through the airflow holes to force liquid out of the mouthpiece), or even just turn your device to a higher setting and clear the tank by vaping.
Why won't my e-cigarette fire?
The most obvious problems that could lead to your e-cig not firing are that your device isn’t switched on, that your battery isn’t charged or that your wattage setting is too low. Most devices switch on with three or five quick presses of the fire button, so try that first – usually an LED will flash or the screen will activate so you can see when it’s switched on. If this doesn’t work, the battery could be depleted, so try plugging your device into a charger (for mods with on-board charging or in-built batteries) or removing the battery and charging it separately (for devices with removable batteries).
How to tell if a mod is locked?
On mods with screens, there will likely be a padlock symbol or other sign to indicate that your device is locked. On vape pens, it might not be as easy to spot, but try clicking the fire button three or five times in quick succession, and look for a blinking LED to indicate that you’ve done something.
How long does it take for a regulated device to cut off?
Almost all regulated devices have a cut-off for really long puffs, usually cutting out after 10 seconds. If you aren’t getting any vapor but the problem is intermittent, it could be that you’re running into this limitation. In many cases, the device cuts out for a while after hitting this limit to give the coil time to cool down. This will rectify itself, just be sure to take shorter puffs in future.
Why is my battery dead?
Unfortunately, if your charger works and the problem doesn’t seem to be with the device itself, your battery could be dead. Over time, all batteries stop working, and if you’ve noticed that your battery hasn’t been holding its charge as well, this could be the cause of the issue.