Full Answer
What setting should I have my vape on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What wattage should I run my vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage should I vape at 0.4 ohm?
23 - 28 wattFor example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What coil resistance should I use?
2.4-2.8ohmIt's a good idea to start vaping with an atomizer and coil in the 2.4-2.8ohm range and take it from there.
Is it better to vape at lower wattage?
If you want more or less vapour: A higher wattage equals more power provided to the coil. As the power is increased, the coil produces warmer, larger clouds of vapour from your vape – ideal for creating tricks, such as smoke rings. On the other hand, for cooler vapour clouds, simply turn the wattage right down.
What is the best wattage for a 0.6 ohm coil?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What is the best wattage for a 0.5 ohm coil?
For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts.
What is the best wattage for a 0.3 ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
How many watts is a 0.25 ohm coil?
45-57W25 - 0.25Ω Ohm (45-57W) new.
What's the difference between 0.2 and 0.4 ohm coil?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
How many watts do I need for a .23 ohm coil?
Wattage range 20-45W.
bombastinator ECF Guru Verified Member ECF Veteran
Nichrome is generally considered an obsolete material so it wouldn’t surprise me. This is one reason why I avoid coil head cartridges. You are subject to the whims of manufacturing
chellie Ultra Member ECF Veteran
I have been vaping with kanger for 6 years and I like to vape with Ni200 coils, but I'm noticing alot of places are sold out. Is kangertech still manufacturing them?
Pete M Senior Member
I've noticed they stopped selling them in shops here (UK). I was told in the vape shop I go to they've stopped manufacturing but maybe take that with a pinch of salt. They're pretty reliable but just because they're not stocking them anymore doesn't necessarily mean that.
DarkButterfly Full Member
I use mainly Kanger too -- I have 2 Kbox nano boxes, a subtank mini box, nebox and a subbox mega. I mainly use with toptanks (mini and nano) and protank 4 . They all take the same coil heads as well as the rba piece so now I just use the rba so I do not have to buy coils anymore.
chellie Ultra Member ECF Veteran
I use the all subtank minis, and it's so weird but I like to use them on the joyetech ego one VT on Ni setting with the Ni200 coils, all the mods that I set the temperature just doesn't compare to my ego VT weird huh lol I bought like 10 of the ego one VT because the break so easily.
Baditude ECF Guru ECF Veteran
I have been thinking about trying to build my own coils, I just thought it looked so complicated, and with kids not much time to do it. But it doesn't sound that bad how you explained so maybe I will give it a shot. Does the flavor taste good still. And which cottons do you buy? That bacon package I always see online?
Beamslider Vaping Master Verified Member ECF Veteran
If you plan on using NI200 for to build coils, dry burning it is probably not a good idea.
