Select your preferred Liquidpod and remove from packaging. Insert the Liquidpod into the rechargeable device. You will feel it click into place. Once you are ready to use your blu device, gently draw on the mouthpiece.
- Select your preferred Liquidpod and remove from packaging.
- Insert the Liquidpod into the rechargeable device. You will feel it click into place.
- Once you are ready to use your blu device, gently draw on the mouthpiece. The device will self-activate and begin producing vapor.
How to use a vape pen?
Simply press the button and inhale while keeping the button depressed. Some vape pens, especially those for use with cannabis oils, may not have the button, so all you need to do is inhale (known as “auto draw”). Small sips are generally the way to go, so avoid inhaling as hard and as deep as you can.
Can I use any e-liquid on my Blu device?
Some vaping pens allow you to use any e-liquid on the market, but are also not the highest quality and often don't stand the test of time because low quality e-liquids can damage the device. blu devices come with a range of different flavours for whichever e-cigarette you choose.
Should you buy a vape pen with an activation button?
The advantage of activation buttons is that they offer more control over temperature. Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit.
What are the best oil cartridges for vape pens?
One form is pre-filled, disposable oil cartridges. Other concentrates are referred to as budder, wax, and sugar, so named for their appearance and consistency also work best in vape pens. These are generally also easier to work with and load on the go. You can also get refillable oil cartridges.
How do you turn on a blu vape pen?
0:581:29Tutorial - How to Get Started with your blu PRO® E-Cigarette - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn on the blue probe by pressing the buttons five times. The button will flash three times to letMoreTurn on the blue probe by pressing the buttons five times. The button will flash three times to let you know the device is on you're all set the EC can be turned off the same way. Before.
How do you smoke a blu pen?
So, you simply to take a draw on the device and it activates, just as it would with a cigarette. Other devices, such as the blu PRO™, use a button to start the vapour production. You press the button, this activates the heating element of the device, and the heated e-liquid produces vapour ready to be inhaled.
Why is my blu vape pen not working?
Myblu isn't producing any vapour This can be caused by several things: the pod may not be fully inserted, there could be some liquid or residue between the pod or the battery connection/metal conductors on the pod may have been pushed down too far.
What does it mean when your blu vape blinks blue?
If your battery flashes continually, it's an indication of a problem with the battery's performance. To fix the issue, try cleaning the battery first. Unscrew the battery from the blu Tank™.
How do you work a blu?
1:093:19blu | myblu Starter Kit Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kit comes with a gold leaf 1.5 milliliter pod available separately are eight flavors to chooseMoreThe kit comes with a gold leaf 1.5 milliliter pod available separately are eight flavors to choose from that come in a box of two liqui pods insert the liqui pod until it snaps.
How do you set up a blu vape?
Simply press the battery button five times in quick succession. The lights on the button and the battery tip will flash 3 times to show it's switched on. Put the mouth-end in your mouth, press the battery button and inhale the vapour like you would inhale on a cigarette.
How do I know when my blu is charged?
Connect the rechargeable device to the USB cord with the charging contacts properly aligned. Once your device begins charging, the red light on the end will glow and remain illuminated. When the indicator light turns off, your blu is fully charged.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
Why does my pen blink when I try to hit it?
If the issue is a leak, turn off your battery and take a Q-tip dipped in rubbing alcohol and clean where the battery and cartridge meet. Make sure to dry them before screwing them back together. Another reason your battery may be flashing is because it may be dead and needs to be charged.
Why does my Blu blink 5 times when I plug it?
If a short circuit occurs during operation, the indicator light will flash 5 times and the unit will shut down.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
What charger should I use with the blu® device?
We do not recommend that you use any other charger or charging cord sold by a third party as it may not meet voltage and current requirements for t...
How do I charge the blu device?
Complete the following steps: 1. Remove your device and Liquidpod from packaging.***2. Unfold the attached USB cord from the pack and plug it into...
How do I know when the blu® device needs to be recharged?
• BLUE indicates the device battery has 20-100% remaining charge.***• ORANGE indicates the device battery has 5-19% remaining charge.***• RED indic...
How do I use blu® Liquidpods?
1. Select your preferred Liquidpod and remove from packaging.***2. Insert the Liquidpod into the rechargeable device. You will feel it click into p...
What are the safety features of the blu® device?
If you take a single puff lasting 10 seconds or more, the blue indicator lighting will flash 10 times and your device will shut down and reset afte...
How to fill a clearomiser with blue liquid?
To fill your clearomiser with blu Liquid, complete the following steps: Unscrew the mouthpiece. Open the blu Liquid bottle by pushing down on the cap and turning it to the left. Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill.
What happens when a Blue Pro battery runs out of charge?
When your blu PRO Battery starts to run out of charge, you will start to notice a few changes in the way your blu PRO is performing. This may include less vapour production and a less intense flavour.
Why does my USB charger light turn blue?
The light on the USB Charger will glow red and the tip of the device will flash to indicate that it has started to charge. Once the device is fully charged, the light on the USB Charger will turn blue. If the light does not glow when the USB Charger is plugged in, the device has not been screwed in correctly.
Does the Blue Pro have coil resistance?
The blu PRO has an optimised coil resistance which creates a smoother taste to give you a unique vaping experience. Your blu PRO is shipped to you with a partial charge but we recommend that your device is fully charged before your first use. To get started, all you’ll need is your fully charged blu PRO and your favourite blu Liquid.
How does a vape pen work?
Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.
What is the part of a vape pen that draws vapor?
Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.
How many clicks to turn on a vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.
What is the main part of a vape pen?
Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.
What is a single use vape pen?
These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.
What is a cannabis concentrate?
Cannabis concentrates come in a few forms. One form is pre-filled, disposable oil cartridges. Other concentrates are referred to as budder, wax, and sugar, so named for their appearance and consistency also work best in vape pens. These are generally also easier to work with and load on the go. You can also get refillable oil cartridges.
What is an auto draw on a vape pen?
Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.
How to charge a pen when it flashes?
Start by disconnecting the battery from the tank (you will have to unscrew it). Simply connect your battery on to the charger. Wait until the indicator light on the battery is no longer on – this may take some time though.
What do you need to know about vaping?
Things You Need to Know About Vaping. Now you know how to use a vape pen , but there are other things to keep in mind before you start using it. For instance: You should not use a vape pen if you do not smoke already. You may end up becoming addicted to it.
How to use a scuba diving tank?
Here is what you need to know about it: Start by unscrewing the tank from the battery. Now, take off the mouthpiece. Make sure the tank is fully disconnected from the battery. Never try to fill it up while it is still connected to the battery .
How many times do you have to click to vape?
The vaping process will start only when you click the button five times and hold it down while drawing. Clicking it five times again will stop the vaping process and turn off the device. You have to click it five times to ensure that you do not turn it on accidentally.
What is the practice of using an e-cigarette called?
E-cigarettes have become quite popular in the recent years. The practice of using an e-cigarette is known as "vaping". More and more people are now turning towards this practice in an effort to quit smoking.
Do e-cigarettes burn?
The biggest difference is that e-cigarettes do not burn, so there is no smoke. It means that if you use a vape pen in public, you do not cause harm to others in your surroundings. Still, more research needs to be done in this area to correctly understand the long-term negative effects of e-cigarettes and the effects of secondhand exposure.
Is vaping safe for heart?
It is not safe for people with heart problems and may even cause damage to your arteries over time. While there are drawbacks of learning how to use a vape pen, there is evidence that vaping may be safer compared to regular cigarettes. The biggest difference is that e-cigarettes do not burn, so there is no smoke.
Where are vape pen batteries found?
blu e-cigarette batteries form the base of the device and attach directly onto the clearomiser for the blu PRO™, or the liquidpod for the my blu™ device. Whenever the battery is out of charge, it can be connected to the USB charger provided so that it can recharge for future use.
How do blu vape pen batteries work?
blu vape pen batteries are activated in one of two ways depending on the device. The blu PRO™ has a button on the side of the device. When this button is pressed, the battery switches on the heating coil inside the clearomiser, turning the liquid into vapour.
How do I know that my battery is working?
blu vape pen batteries have an LED light that lights up whenever vapour is inhaled. This same light can also be used to indicate when the battery is fully charged. The LED light will change colour or begin to blink when it needs recharging.
