There are two ways to turn on a vape. If using a push-button vape, simply click the button on the console rapidly five times. You should get an indication that the device is on, usually in the form of a flashing LED light. This is the same way to turn push-button vapes off.
How do I recharge my Jupiter vape pen?
Jupiter vape pens feature powerful vape pen batteries that run strong for hours, such as the Jupiter Palm and Silo. To recharge, simply plug into an included USB charger that can juice it up to full capacity.
How to turn on a vape pen?
HOW TO TURN ON A VAPE PEN. To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer ...
What is the Jupiter vape pen?
The Jupiter vape pen provides you with hours of entertainment. Choose to enjoy it in your living room or on the go. There are many different designs to choose from, from slim and sleek to flat and boxy, as well as a variety of colors.
What should I do if my vape Battery turns off?
The lifespan of any vape battery varies greatly depending on the use and care of your battery. If your battery can turn off, we recommend doing so when not in use. Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using.
Why is my Jupiter vape not working?
If your vaporizer suddenly stops working, you can do some basic things to check what's going on. First of all, make sure your device has a full charge and charge it if needed. If it's not working at this point, rotate the cartridge a few times, to make sure you get a positive connection with the power supply.
How do you turn on Jupiter Ccell?
Activating Vaporizer Inhale on Cartridge mouthpiece to activate the Power Supply. The LED will illuminate to indicate activation. To avoid residue buildup, remove the Cartridge from the Power Supply when not in use by twisting the Cartridge 360º before pulling it from the device.
Why is my Jupiter Ccell not working?
1-Poor battery connection This is one of the common reasons why your CCELL cartridge might not be working. If your 510 battery is not properly connected to the connection plate of the cartridge, it can result in no or poor contact.
How do you use Jupiter pods?
Insert the Pod by dropping the magnetic base into the Power Supply until it clicks into place. Luster features a secure magnetic connection that makes switching between pods simple and discreet. To avoid residue buildup, remove the Pod from the Power Supply when not in use.
How do I turn on my Ccell battery?
0:170:56AbsoluteXtracts CCell Battery Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis light will flash when the battery needs to be recharged AVX cartridges feature auto drawMoreThis light will flash when the battery needs to be recharged AVX cartridges feature auto draw technology simply attach and inhale to activate.
Why is my Jupiter battery blinking when charging?
What do the flashing lights indicate on the power supply when charging? The light tip on the Standard and Compact and the light indicator for Palm and Silo indicate the charge status of the device. When the battery is low, the light tip will flash 10 times indicating the need to charge the device.
Why is my cart not hitting on my battery?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How long does a Jupiter battery take to charge?
1-2 hoursTwist on your compatible 510 bottom airflow cartridge and inhale; it's that easy! Jupiter Research and CCell technologies have revolutionized the vape battery industry. VPM includes a USB charger for your convenience. Charging only takes 1-2 hours and can be charged using any standard USB 2.0.
Why is my CCell cartridge not working?
If a CCELL Palm is not working correctly, it could be for several reasons. The most likely reason is that the cartridge has too much build-up and residue, so it is not making proper contact with the battery. Check to make sure the threads of the cartridge are clean, and same with the battery contacts.
How do you use a Jupiter vape pen?
Inhale on Cartridge mouthpiece to activate the Power Supply. For Standard and Compact, the light tip will illuminate to indicate activation. For Palm and Silo, the LED on the device will illuminate to indicate activation.
Are Jupiter carts legit?
As for their most recent production line, these CCELL Cartridges that say “Jupiter” also are authentic. Each cartridge has three unique stamps engraved on the bottom of it. A CCELL logo or Jupiter, a K stamp and a serial number as well.
What does it mean when my Uno vape is blinking?
Uno uses a breath-activated, subtle LED light to indicate the device is in use. When the battery is low, the LED light will flash 10 times. When the battery begins to charge, the LED lights up and remains lit. When the battery reaches a full charge, the LED light will flash 20 times and then turn off.
Why is my Jupiter vape pen not working?
This is because the battery contacts might be clogged, and all you need to do is wipe the battery contact with an alcohol-based wipe. When you finish, connect the pen and check if it is working.
How many mAh does a Pike vaporizer have?
It uses a disposable Li-ion battery that has a capacity of 350mAh. This vaporizer has an activation LED indicator.
How many cartridges are in a Jupiter liquid 6?
There are five cartridges under the Jupiter Liquid 6 vaporizer. They include;
Why is the vape reservoir sealed?
This is because their reservoirs are well-sealed, preventing any leak. It also applies to the mouthpiece, ensuring a high efficacy till the last vape.
Is Jupiter liquid 6 ETP compatible with 510?
For it to prevent you from content exposure, it has a tamper-resistant press-fit mouthpiece. This vaporizer is universally compatible thanks to the 510-thread connection.
Is Jupiter a good vape?
Jupiter prides itself as a global manufacturer when it comes to high-quality vape pens. This company was established in 2015 and is currently reputable when it comes to vaporizer cartridges and more. I can assure you that the Jupiter vape pens are high quality and adhere to high-quality standards.
Can you smoke with a vape pen?
Cannabis odor can be choking to some of the people you are in the same house. But when using a vape pen, no one will suffer from the smoke. This is because it doesn't emit any odor. Additionally, you can carry your vape pen wherever you want. Once you are done vaping, you can place it securely and go on with your activities.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What kind of cartridges do oil vapes use?
Most of the oil vape batteries we sell are made for 510-threaded cartridges. Be sure to check what threading your battery has, and purchase cartridges that fit your battery.
How to clean battery oil?
Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
What to do when your vaporizer stops working?
First of all, make sure your device has a full charge and charge it if needed.
What happens if you use a rechargeable vaporizer?
If you have a rechargeable vaporizer, condensation and residue can gunk up in the connection between the power supply and the cartridge. It’s not a huge deal, but it can impact how your device functions over time. So, just clean it!
Can Jupiter Research vaporizers be dropped on hard surfaces?
While Jupiter Research vaporizers are sturdily built, they can only take so much wear and tear. Like your phone, avoid dropping them on a hard surface, as they can crack or break. They’re also sensitive to extreme temperatures, so avoid leaving them in the hot sun or in very low temperatures.
How to turn on a vape?
There are two ways to turn on a vape. If using a push-button vape, simply click the button on the console rapidly five times. You should get an indication that the device is on, usually in the form of a flashing LED light. This is the same way to turn push-button vapes off.
How does a vape work?
A vape works by using the power from the battery to charge the coil in the device’s atomizer. When this heated element comes in contact with the liquid or oil from the cartridge or tank, it turns it into vapor which the user can inhale through the mouthpiece.
What is a Vape?
A vape (or vaporizer) is a battery-powered device that turns e-liquid, extracts, oils, waxes, or dry herbs into vapor to be inhaled. These are commonly called, and sometimes distinguishable, as:
Can you control the amount of cannabis you inhale?
Some cannabis vapes even let you control the doses you inhale depending on how potent the substance is.
Do you have to turn on a draw activated vape?
Nowadays, you’ll also find a lot of draw-activated vapes. These devices don’t need to be turned on before use. You only need to breathe in through the mouthpiece; this is enough to signal the atomizer to work and instantly turn the e-juice into vapor.
Can you customize your vape?
Many new vapes allow for a customizable va ping experience. You can choose how your device looks. There are bulky ones that scream you’re a loud and proud vaper, and there are devices that are sleek and tiny to fit comfortably in your pocket.
Where are Jupiter cartridges made?
Jupiter Research devices and cartridges utilize CCELL® technology, a leading manufacturer of vaporizer devices and cartridges based in Shenzhen, China. As a designer, developer, and distributor of hardware and technology, Jupiter products are designed in the U.S. (Phoenix, AZ) and manufactured in the high-tech Chinese hub of Shenzhen.
Why is my atomizer cartridge empty?
Cartridge is empty when vapor is no longer produced after a 3-second activation. Due to headspace, the cart ridge may still produce vapor after the reservoir appears empty because of out of view oil absorbed in the atomizer. Learn More
What brands does Jupiter Research use?
Additionally, Jupiter Research proprietary vaporizer devices have been licensed to brands in the U.S. and abroad, such as Kanabo VapePod and Airovapor. To learn more about our partnership with Kanabo, click here.
How to prevent cartridge leakage?
To prevent leakage, store the cartridge with the mouthpiece pointing downward.
Why do you rotate the mouthpiece on a Power Supply?
Rotate mouthpiece to ensure positive connection between the Cartridge and Power Supply.
How to prevent condensation on a pod?
For the best performance, prevent condensation by keeping the contact pins inside the device and on the bottom of the pod clean and dry.
Where is Jupiter Research located?
Our growing team of nearly 40 individuals in engineering, marketing and operations, product development, sales, and short-run print production operates at Jupiter Research headquarters located in central Phoenix. Additionally, Jupiter has remote staff throughout the U.S., Canada, Europe, and China.
What is Jupiter vape pen?
Jupiter Vapes. The Jupiter vape pen provides you with hours of entertainment. Choose to enjoy it in your living room or on the go. There are many different designs to choose from, from slim and sleek to flat and boxy, as well as a variety of colors.
What color is the Jupiter battery?
Every Jupiter battery is available in a single color such as black, silver, white, blue or pink. The Jupiter logo is imprinted on each device. The impressive performance can make this vape your new favorite accessory.
Do you have to clean Jupiter vapes?
There is no need to constantly clean the device. A popular version of the Jupiter vape has inhale activation, so you can let the good times begin without a click of a button. The L9 also has magnetic cartridge connection for an extra-tight hold to the battery.
