how to take apart kanger tech vape pen

by Mr. Urban Dickens Published 3 years ago Updated 2 years ago

Rinse briefly with tap water to remove any surface debris and larger chunks. Next, place your coil in a small cup of Everclear or Vodka to soak overnight. The longer you allow the coil to soak, the more the alcohol has time to work its way into the gunk, breaking it apart.

Full Answer

How do I Clean my kangertech vape pen?

Jan 11, 2022 · Coil type and quality also affect the taste. Use the Torx or Allen Key to open the vape pen, but if tiny buttons pop out, you should be even more careful. Once you feel the coil is …

How do I know if my kangertech atomizer needs to be replaced?

After giving a little twist to the silver ring, the tank should start to unscrew and come off of the battery. Now to take the tank off of the base, you need to grip the same silver ring you did …

How do you guys keep your vape pen from falling out?

Sep 05, 2013 · Get One Here:http://scvapors.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=525&virtuemart_category_id=39&Itemid=169Kanger …

How do I fill up my kangertech evod tank?

Feb 07, 2013 · First clean and dry your T3 or eVod atomizer and base. If your like me you can use fresh hot water and let it dry. Of course you can just use a napkin, towel or shake the excess …

How do I reset my Kangertech vape?

Remove the battery and hold down all 3 buttons simultaneously while re inserting the battery. It should show 'Kangertech' as you turn it on if you did it right. This will fix the 9.9ohm reading and the E1 error message.Feb 10, 2019

How do I remove my Kangertech tank?

Part of a video titled How to remove glass tank from Kanger Subtank - Vinyl by SJ

0:01

0:17

Keep wrapping it around wrapping it around and eventually pops right. Off.MoreKeep wrapping it around wrapping it around and eventually pops right. Off.

How do you change the coil on a Kangertech vape?

Part of a video titled How to change a Kangertech EVOD Coil - YouTube

0:06

0:35

Simply unscrew the bottom section as if you were filling the tank. The coil is this part here itMoreSimply unscrew the bottom section as if you were filling the tank. The coil is this part here it unscrews from the base like so and the new one can be screwed in to replace.

How do you turn on a Kangertech vape pen?

To turn ON / OFF press the fire button 5 time in 2 seconds. Squeeze the plastic bottle (Squonking) to get your desired amount of liquid into the tank, press the fire button and vape. If the button is pressed for more than 10 seconds the unit will automatically shut down. Release the button and fire again to reactivate.

How do you fill a Kangertech Subtank?

1) Simply remove the Tank from your device and then turn upside down. 2) The base piece can now be unscrewed from the top piece by turning in an anti-clockwise direction. 2) This reveals the filling area.

How do you remove the glass from a Kanger Subtank?

1) First remove the tank from your attached battery. 2) Carefully unscrew the base piece ensuring no pressure is applied to the glass tank during this process. 3) The glass can now be removed, this piece is held in place by 2 rubber o-rings and will simply slide off, if it is a tight fit grip firmly and twist.

How do you change the coil on a Kangertech Subvod?

Part of a video titled Kangertech Subvod Kit Overview - Glass and Coil Replacement!

1:03

3:49

It comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out toMoreIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out to put your new one in just put it in to write it in I always recommend taking a few drops of liquid.

How do you prime a Kangertech coil?

Add a few drops of e-juice into the holes on the body of the coil. Follow that with a drop or two inside the head of the coil to fully saturate the center. Step 3. Reassemble the tank and attach it to your mod, then take four to five dry hits, pulling from the tip without pressing the fire button.Nov 1, 2019

How do you charge a Kangertech vape pen?

Connect the battery to the charger by bringing the threads together and turning in a clockwise direction. Next, holding the charging lead, plug the small end (mini USB plug) into the battery and the other end (standard USB) into a USB charging port.

What does it mean when my battery blinks 10 times?

Sometimes, a pen blinking ten times can mean that the voltage level is too low despite the battery being properly charged. In this case, you need to look at the battery connections of your device. Most often, this happens because the connections are either dirty or not lining up exactly with the battery.Feb 27, 2020

How do I turn on my Kangertech EVOD?

Part of a video titled Turning on a Kangertech Battery - YouTube

0:22

1:21

And then take the battery put it on your pin. And you must turn it on when it arrives it's off thisMoreAnd then take the battery put it on your pin. And you must turn it on when it arrives it's off this one's on because it's on my pin.

Why does my vape pen leak?

Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although a small amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use. Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen and hopefully prevent it from occurring again right away.

Do you need to remove the silver ring from an atomizer?

Depending on why you are disassembling in the first place, you may or may not need to remove the atomizer.

What is the airway on an E liquid tank?

If you look into the bottom end of the tank, you can see the airway, which is a long cylindrical tube connected and leading out to the mouthpiece. Depending on what e liquid you got, you will either have a glass dropper or a nipple on the bottle to dispense the e liquid out of.

Can you stick a cotton swab down the mouth piece?

You do not want to do this with the base of the tank still on because if you stick a cotton swab down the mouth piece too hard or quickly, it could hit the atomizer and damage it beyond the point of use. Always be cautious and gentle with your EVOD vape pen in order to get the longest life out of it as possible.

How long does an EVOD battery last?

As long as you stick to these tips & tricks and keep up with maintenance and cleaning, your battery should last you roughly 300 charge cycles and your tank should last you about 6-12 months.

ddavis7426 Senior Member ECF Veteran

Prob not. But if I could get that vape with an EGO battery, I would still rather pay someone else to rebuild/build it for me.

DH88UK Full Member

do you get this level of performance out of a Factory stock EVOD tank and 1.8 ohm Coil?

About TOP EVOD Kit

The Kanger TOP EVOD Starter kit is a simple device to use and can provide huge vapor,The TOP EVOD Starter Kit features a simple to use one-button design that is perfect for you,features an incredible slim and sleek design designed for new vapers, casual users, or simply users that are constantly on the go.

How To Charge TOP EVOD Starter kit

Charging: Simply charge TOP EVOD Starter kit by connecting it with a computer , a power bank, a wall adapter or other electronic devices (with a USB port that is capable of providing a charge) via USB cable, also you can purchase an inexpensive USB car adapter, thereby affording you the ability to charge theTOP EVOD Starter kit in the car.

Vape-FAQ.com