To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping.
How do I open the tank on my aspire tank?
Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid.
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
Why is my aspire vape not producing vapour?
Taking a draw with a fully charged and seemingly working device only to produce no vapour is an annoying one of the Aspire vape problems, to say the least. This could be down to a couple of problems. Make sure you check that everything is connected tightly.
How do I Prime my aspire atomizer coil?
Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping.
How do you open an Aspire vape pen?
0:171:26How to use your Aspire K2 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen it comes to changing the atomizer. Simply unscrew it from its housing and screw a new one in aMoreWhen it comes to changing the atomizer. Simply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simply insert the juice bottle done one of the sides. And squeeze.
How do I take apart my Aspire vape tank?
How to Take Apart a Vape TankTo remove the atomizer coil, unscrew it by twisting counterclockwise.To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place.To remove the mouthpiece, lift it straight up to pop it out of its socket.
How do you open a vape that won't open?
Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
How do you open a stuck vape lid?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar. Now, don't mistake “hot water” for boiling water. The latter can break your vape tank.
How do you unscrew a vape?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you open an Aspire breeze?
0:373:23How To Change A Coil | Aspire Breeze 2 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich you press together simultaneously. And it pops the cartridge the orange rubber is your fillMoreWhich you press together simultaneously. And it pops the cartridge the orange rubber is your fill port. So you pop this up. And pour the juice in that hole there now the coils for the breeze.
How do you unscrew a tight cart?
3:436:57ROHS iMini How to remove a tank that's stuck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So youMoreSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So you got to put enough grip on this neck. Here.
How do you remove a stuck vape glass?
3:004:45Removing Glass From a Sticky Subtank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can twist it and your glass should come off what that does just you're playing with thermalMoreYou can twist it and your glass should come off what that does just you're playing with thermal expansion. And contraction. Basically the glass is gonna be warmer.
Why does my vape get stuck?
The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit. Instead of a tasty hit of delta 8 THC, you get a clogged mouthpiece and a mouth full of bitter vape juice.
How to open Aspire tank?
Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to install coils on the Pockex
To install a coil on the Aspire Pockex you will need to unscrew the top silver part. When you take this off you can then unscrew the coil and replace it with your new one.
Filling up with juice
Filling up the Aspire Pockex is easy. You simply unscrew the top silver part, the coil will also come out here too. Have a paper towel handy so you can lay the coil on it and avoid juice dripping.
How to use Aspire Pockex and turn it on
Click the power button 5 times to turn it on and 5 times to turn it off. Make sure you do turn it on and off as this will preserve battery life and prevent it going off in your pocket or bag.
How to take a draw
The Aspire Pockex is a MTL kit. This means mouth to lung. You draw the vapour into your mouth and then your lungs. Just like you do with smoking. Direct to lung vaping is possible, however it is a narrow drip tip which means you also have to inhale extra air by opening your mouth.
How to check battery life and charge the kit
The Aspire Pockex has a 1500mAh internal battery. This would last about 2 hours if you were constantly vaping it. You will know that the battery needs charging as the LED light around the power button will turn orange. If the light is blue, it has more than 30% battery.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
