Attach the Alien vape cartridge to the end of your battery Press the button five (5) times to turn your pen on (the green, blue or red light will come on) or off (if already on) Your pen has three settings which heat the oil at a higher or lower voltage.
Full Answer
What is alien vape?
Alien Vape. Alien Vape is driven by an unearthly desire to inspire smokers across the galaxy with our passion for vaping. We believe vaping is the future for all man kind. It is our opinion that our prosperity as a human race is predicated on our efforts in designing and deploying products that promote a vape lifestyle.
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
How to charge a vape without a charger?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How do you set up a Smok alien vape?
Firstly slide off the battery door on the base of the Smok Alien, then insert as indicated on the inside of the door, and inside the device itself. (i.e. Insert the first battery positive first, the second battery negative first). Then press the side firing button 5 times in quick succession to turn on.
How do I change settings on Smok alien 220W?
1:5810:24Complete Guide to using Your SMOK Alien Mod - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that the mod can perform properly so I think that's a great option for the alien. Lot it's reallyMoreSo that the mod can perform properly so I think that's a great option for the alien. Lot it's really cool. So the other really cool thing is that you can change the strength of how hard your mod is
How do you put together a vape mod?
0:053:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAn external charger is best step two insert your battery. Make sure to fit them properly. And notMoreAn external charger is best step two insert your battery. Make sure to fit them properly. And not upside. Down look at the positive. And negative signs. Step three check your coil.
How do you change the coil in a Smok alien vape?
1:295:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If youMoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If you accidentally remove the bottom plate of the atomizer.
How do I unlock my vape mod?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo again to unlock it power button up button same time for two seconds unlocked.MoreSo again to unlock it power button up button same time for two seconds unlocked.
How do you use a Smok vape?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you use a vape mod for beginners?
All you need to do is hold the fire button down while you draw vapor from the mouth piece. E-liquid and oil vape tanks will put off vapor almost immediately, while it may take a dry herb or wax atomizer a few seconds to heat up and put off vapor.
How do you use a vape step by step?
It's a simple technique.Slowly draw vapor into your mouth for a few seconds.Hold the vapor in your closed mouth for a second or two.Open mouth and breathe in the vapor to your lungs (not a “swallow”)Exhale after vapor is in lungs.
How do I put my vape back together?
How to Refill a Vape TankTo refill your top-fill tank, start by removing it from the body of your e-cig mod.Unscrew the base and carefully remove the coil. ... Next, unscrew the top of the tank to add your e-liquid. ... Reassemble your tank and screw all the pieces back together tightly.More items...•
What coil do I need for Smok alien?
SMOK TFV8 CoilsSMOK TFV8 Coils The TFV8 is the coil that comes with SMOK TFV8 Baby tanks and is compatible with the top of the range SMOK Alien 220 Watts mod and the Brit Beast Tank.
How do you use an alien disposable vape?
Anyone can pick up and use a disposable vape pen in these simple steps:Remove vape from the packaging.If there is a button, click it, and an indicator light should turn on. If there is no button skip to step 3.Inhale through the mouthpiece. ... Exhale the vapor.
What tank does the Smok alien use?
Baby Beast TFV8 tankSMOK ALIEN 220W KIT with TFV8 Tank The UK Smok vape kit comes with the brilliant Baby Beast TFV8 tank and also allows you the freedom to personalise your own Smok Alien Kit by using your current favourite tank or selecting one from our suggestions. The Alien is made from zinc alloy with carbon fibre inlays.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
A Complete Guide To The SMOK Alien Mod
Looking for help with your Alien Mod or just need guidance on how to operate it, then check out this complete and detailed guide to the SMOK Alien Mod. The Alien Mod has become one of the most popular mods of 2016, taking home 1st place in the Best Regulated Mod category on GuideToVaping’s Best of 2016 event.
About The SMOK Alien Mod
The Alien Mod manufactured by SMOK (Shenzhen IVPS Technology Co., Ltd) is constructed out of a premium Zinc Alloy. It offers an incredibly detailed design that boasts high appeal and a comfortable feel.
Raghav Shankar New Member
I recently got my smok 220W Alien Kit TC as my starter kit. Using the Baby Q2 tank (came pre-installed) I'm having trouble figuring out the best settings for vaping 3mg and 6mg liquids without having that burning sensation with every inhalation. I definitely some help here!!
ddirtyvapes Ultra Member ECF Veteran
The smok alien kit only comes with factory coils included, no wicking needed.
Migzz Full Member
The alien kit only comes with factory coils included, no wicking needed.
ddirtyvapes Ultra Member ECF Veteran
i get you. no worries. Just didn't want OP to say WAIT WHAT DID I MISS?!
Eskie ECF Guru Verified Member ECF Veteran
Apologies... Im still new to this. I thought all these coils had some sort of cotton/wick that needed to be... Wait! "Primed" thats what i meant... I know when i first start i was so amped to try it i did read and never primed my coils. This gave me a really nasty burn taste at 1st.. It did get way better after a while
Skold Ultra Member ECF Veteran
Eskie is right, the recommended values are rarely correct. I hear lots of people say, the cleito needs to be vaped at least 50 watts but I actually find it an okay vape at 30 watts so don't follow the guidelines given just vape as he said at your sweet spot cos' it is definitely different for everyone.
BrotherBob ECF Guru ECF Veteran
I recently got my smok 220W Alien Kit TC as my starter kit. Using the Baby Q2 tank (came pre-installed) I'm having trouble figuring out the best settings for vaping 3mg and 6mg liquids without having that burning sensation with every inhalation. I definitely some help here!!
What is a Smok alien mod?
The SMOK Alien Mod Kit features a bright and clear OLED screen that displays all the essential metrics all at once. From wattage or temperature settings, to Soft, Normal, or Hard vaping effect down to the charge level, current voltage, atomizer resistance, puff counter and more, you'll be in the know at all times, empowering your vaping sessions. An adjustable button interface makes it easy to control the SMOK alien vape, and a micro-USB connection allows you to make firmware upgrades.
How tall is the Smok Alien?
At just 300mm in width and 85mm tall, the SMOK Alien vaporizer kit is super compact, making it easy to carry with you in stealth. Up-to-par with the latest advanced mods in terms of design, the Alien offers unique features you won't find in the average vape. A firing bar takes place of the usual power button, ensuring easy firing while gripping the device. The SMOK Alien also boasts an OLED screen that features more data than the usual control display, giving you keener insight into your vaping sessions.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
