How To Vape The Aspire AVP: While the device is turned on, simply take a draw (inhale) from the mouthpiece and the AVP will automatically detect that you’re using it. It will immediately auto fire so that you never have to press a button to vape. How To Set The Output Wattage: To set the output wattage, press the mode button twice quickly.
How to set up a vape?
· The Aspire K3 Quick Start Kit. A great device from Aspire, this kit comes with a K3 1200mAh battery and is paired with the K3 tank. Ideal for mouth to lung v...
How to charge a vape without a charger?
· How To Vape The Aspire AVP: While the device is turned on, simply take a draw (inhale) from the mouthpiece and the AVP will automatically detect that you’re using it. It will immediately auto fire so that you never have to press a button to vape. How To Set The Output Wattage: To set the output wattage, press the mode button twice quickly. The LED light will …
How to vape like a pro?
· How to Use Aspire Zelos 50W 2.0 Vape Kit -User Manual 1. Partially unscrew the top cap to loosen. 2. Place your thumb on the top cap right above the triangle symbol and push the top cap away until the filling hole is... 3. Add your preferred e-liquid into the tank through the filling hole. 4. Push ...
How do you heat up a vape coil?
· Filling up with juice Filling up the Aspire Pockex is easy. You simply unscrew the top silver part, the coil will also come out here too. Have a paper towel handy so you can lay the coil on it and avoid juice dripping. You then fill the 2ml tank up with your 50/50 e liquid. How to use Aspire Pockex and turn it on
How do I change the settings on my Aspire vape?
Pressing up or down button to change wattage, fire button to select time from 1 to 10 seconds, pressing up and down buttons simultaneously again will exit your Customizable Power Settings.
How do I turn on my Aspire vape pen?
3:294:51Aspire K1 Starter Kit - How To Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou the battery is currently turned off press a button five times within two seconds to turn it onMoreYou the battery is currently turned off press a button five times within two seconds to turn it on the button will flash pressing. The button now will show that it is active.
How do you set up a new vape?
How to set up a VapeStep 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you.Step 2 - Fill your tank or pod with e-liquid. ... Step 3 - Prime your coil / pod. ... Step 4 - Settings or no Settings? ... Step 5 - Set the correct output power. ... Step 6 - Take your first Vape.
Why is my Aspire PockeX not working?
Make sure you check that everything is connected tightly. Having something like the coil not properly attached can cause this. You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
How do I use my Aspire vape?
0:221:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd ready for use to turn on the aspire pockets press the fire button five times in under threeMoreAnd ready for use to turn on the aspire pockets press the fire button five times in under three seconds. Button will flash to indicate it is now on repeat.
How do I know when my Aspire is charged?
Using the included cable, charge via a USB port. The light at the bottom will turn red to indicate it's charging and will turn green once it's fully charged.
How do you set up a vape tank?
0:053:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAn external charger is best step two insert your battery. Make sure to fit them properly. And notMoreAn external charger is best step two insert your battery. Make sure to fit them properly. And not upside. Down look at the positive. And negative signs. Step three check your coil.
What do you do with a new vape?
After that you can start vaping.Insert a new vape coil into the base of the tank.Fill the tank with e-liquid and assemble the tank.Allow the coil to sit for five to ten minutes to fully saturate the wick.Start vaping.
Do you have to charge a vape before using it?
Most e-cigs have lithium-ion batteries. To guarantee your battery the best start, give it a good first charge. This conditions the battery so that it will last longer and should keep the charge for longer too. It's also important not to allow the battery to fully drain.
Why is my vape not firing up?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
Why is my Aspire PockeX flashing blue?
While the device is on, the LED light will indicate the PockeX's charge level, when the battery charge is above 30%, the light will be blue; When the battery charge is less than 30%, the LED light around the fire button will be pink. Pink light is a cue to let you know your PockeX is in low battery.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
How to use a vaporizer with a 5 head?
The wire in those .5 heads is very thick. It takes a bit for the coil to heat up sometimes, especially if the battery is running low. Press the fire a button for a second or two before breathing in and you’ll notices the vapor will be a lot warmer. I found that the best technique for me is pressing the fire button for a sec, take a couple of quick puffs, re-fire the button and then take a lung hit. When I figured this out, it made a world of difference.
How much juice does the Aspire Atlantis hold?
Now it’s time to fill it with juice. The Aspire Atlantis holds 5ml, but it fills up quickly, so be careful.
Is Aspire a sub ohm vape?
It is also one of the best looking sub-ohm vape tanks around. Period. And – because it’s Aspire – you know you’re supporting American workers, as Aspire is based in the States. Double bonus!
Can you run a senseblazer 200 as an RBA?
You can also run the Sense Blazer 200 as an RBA (though that bit comes separately).
Does Aspire Atlantis V2 have manuals?
As noted in our Aspire Atlantis V2 Review, you get pretty much sweet FA with respect to instructions inside the Aspire Atlantis box. It’s just the tank, some coils and that’s about it – no user guides, no manuals and no safety information. This is rather perplexing for a number of reasons, but mostly because it assumes the buyer is a seasoned player, whereas a lot of people using it will not be.
How to turn on Aspire AVP?
How To Turn The Aspire AVP ON/OFF: Press the mode button five times quickly to turn the device ON. You’ll see an LED light flash white three times to indicate that the device is now on. Repeat the process to turn the device OFF.
Who is Blake from Guide to Vaping?
Blake is the owner and creator of the Guide To Vaping blog. He has expressed his passion for the vaping industry through his deeply rooted and highly informative content. Being a writer and content provider for the vaping industry for year's, Blake has also gained experience from working with multiple blogs and well respected companies.
How to secure a lanyard to a pod?
On the side of the device, there is an eyelet where you can insert a part of the lanyard through. Secure the lanyard to the edge of the device by making a loop and attaching the end of the loop over the hook/peg next to the eyelet. Next, pull the lanyard to tighten. Then insert the pod to continue use. Advertisement.
How to fill a pod with liquid?
How To Fill The Pod With E-Liquid: First remove the pod from the body/housing of the device. Turn the pod upside down and locate the filling hole. Pour e-liquid into the pod until filled. Flip the pod back to its upright position and place it back into the body.
Is AVP easy to use?
While the AVP (Aspire Vape Pod) is very easy to use and operate, there are users that are unfamiliar with vaping devices or experience an issue while using it. Hopefully, by sharing this information, you will be able to properly use the Aspire AVP or fix an issue you may be having with the device.
What is AVP AIO?
The Aspire AVP AIO Kit is a fascinating device that has been created by one of the industry’s most iconic brands. Just like past devices, it’s made with outstanding quality using zinc and aluminum alloy materials for its chassis, while a carbon fiber inlay is present on both the front and back of its panels for enhanced appeal. The Aspire AVP AIO only stands just 82mm by 39mm by 14mm, making it very compact and portable. It comes with an integrated 700mAh rechargeable battery, allowing it to deliver a wattage range of 8W to 12W. It utilizes a power adjustment button to change from 8W to 10W to 12W and even features a bypass mode for times when charging. Believe it or not but the AVP Kit has a draw-activated firing mechanism, so you’ll never have to fool with a button just to vape. The pod has a 2ML e-liquid capacity and features a bottom fill system and a Nichrome 1.2-ohm integrated coil.
Does the AVP pod burn up?
I have the AVP for almost a year now and tends to work great. It does not burn up easily like the other smok pods that i have and the battery almost last all day. Only downside i have noticed over time is the metal casing that the pod sits in must get bent or stretched as i have to wiggle the pod around sometimes or push down to get a connection when taking a draw.
How to increase wattage on a wattage monitor?
Press the “+” button to increase wattage, voltage or temperature “-” button to decrease. Pressing the “+” or “-” button longer will change the number faster.
Can you use e-liquid if you are allergic to nicotine?
Do not use if you are allergic to nicotine or any of the other ingredients contained within the e-liquid (see manufacturer’s label for full details).
How to install coils on Aspire Pockex?
To install a coil on the Aspire Pockex you will need to unscrew the top silver part. When you take this off you can then unscrew the coil and replace it with your new one.
How long does the battery last on the Aspire Pockex?
The Aspire Pockex has a 1500mAh internal battery. This would last about 2 hours if you were constantly vaping it. You will know that the battery needs charging as the LED light around the power button will turn orange. If the light is blue, it has more than 30% battery.
What is an Aspire Pockex?
The Aspire Pockex is a MTL kit. This means mouth to lung. You draw the vapour into your mouth and then your lungs. Just like you do with smoking. Direct to lung vaping is possible, however it is a narrow drip tip which means you also have to inhale extra air by opening your mouth.
Do you need to change coils in eliquid?
You will know you need to change the coil as the flavour of the eliquid will not be so good. It might taste burnt or just a little off.
What is the Aspire breeze?
The Breeze is our latest all-in-one device that employs a compact and ergonomic design, no matter how you hold or grip it, it feels good in the hand. The breeze has a built-in refillable tank that holds 2ml of e-juice and is compliant with TPD regulations. It also utilizes our U-tech coil which ensures you a flavorful vape. Not only that, its auto-fire feature adds even more convenience to your daily vaping, no need to press the fire button, just inhale from the drip tip and it will work for you. The fire button also helps further navigate the Breeze.
How much current does the Aspire Breeze have?
Aspire Breeze Charging. The Breeze can be charged from its Micro-USB charging port, maximum charge current can reach up to 800mA. It can also be charged by using the charging dock for more convenience.
How to use the breeze?
In addition to its simplicity and good looking in design, the Breeze is also super easy to use, just inhale from the drip tip without pressing the fire button, the breeze will work for you. Make sure the Breeze has been filled with e-juice before taking a inhale.
