No Coil Detected – GeekVape Aegis Legend Kit Instruction
- Your coil head may be too tightly connected to the atomizer base, causing an error A: Please reinstall the coil head. Don’t need to tighten too much, try again
- If you still can’t solve the problem, then it may be that your coil head is broken. ...
- If you still can’t solve your problem, I think you need to consider your 510pin damage. ...
Full Answer
What does “no coil detected” mean?
Aug 16, 2019 · We had listed some of the normal reasons that may cause no coil detected on your mod.More details at:https://geekvape.com/aegis/Aegis-Legend-Kit.htmlIf you s...
Why is my vape not reading my atomizer?
Jan 22, 2019 · When you receive the No Coil Detected warning and it’s an issue related to the mod, it’s often an issue with the center pin in the 510 connector. Since the pin in the Aegis Legend is spring-loaded, the only way the mod can be the cause of the issue is if the pin got stuck in its lowest position somehow.
Why is my vape not getting power?
Sep 18, 2018 · Today I will tell you how to solve this problem. 1. Your coil head may be too tightly connected to the atomizer base, causing an error A: Please reinstall the coil head. Don’t need to tighten too much, try again 2. If you still can’t solve the problem, then it …
Why does my geekvape aegis legend say no coil detected?
Apr 12, 2020 · Go slow as you tighten the tank, like really slow, and see if there is any point in its travel that the mod detects it. If so, just leave it there, if it can stay there without being all wiggly. Otherwise, try turning it very slowly past that point and see if the connection holds. ccrules and MrMeowgi Amber Petti Platinum Contributor
What do you do when your vape says no coil detected?
It has to be seated right inside your tank to make a proper connection to your vape mod. Unscrew the coil and screw it back in again, making sure it is fully screwed in and there is no cross threading. Now try the tank on your mod and see if this has solved the problem.Sep 9, 2020
Why does my geek vape says new coil?
When you put a new coil in a tank, the mod will recognise that it's a different coil to the previous one you had in it because of the resistance change. When it says new coil, select yes and it will work fine. If you select no it will still work but will still use the resistance of the previous coil you had in it.May 16, 2021
Why is my Geekvape not working?
Geek Vape Aegis Solo Not Working If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.
Why does my Smok alien say no coil?
In some cases you may get this warning when there is a coil attached, there are a few reasons this may happen: Coil not screwed in properly - This is one on the most common issues. Just remove the tank head and screw your coil a little tighter.Aug 23, 2018
How do you unlock a geek vape?
If your Geek Vape Aegis Hero isn't hitting when you hold the fire button, you should first check to confirm that you haven't locked the device. Press the fire button five times to unlock it. If the Aegis Hero still isn't hitting, the screen should display an error message telling you what the problem is.
How do you prime a vape coil?
0:451:52Priming a vape coil in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto theMoreGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto the wicking material down the middle hole put your vape coil in your tank fill your tank with the liquid.
Why is GeekVape locked?
Geekvape Aegis Max kits are shipped in locked position. This means that you need to unlock your vape by pushing the button 5 times quickly to unlock. Once it is unlocked, it will blink to confirm it is unlocked and will work. The other simple issue is that it is not charged.
How do you change a GeekVape coil?
2:035:30How to replace a geekvape cerberus coil. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise.MoreAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise. The whole tank should come apart. So you pull the top off and then you can grab your glass.
How do I change my GeekVape Aegis settings?
Use of GeekVape Aegis XFive click on the fire button to turn on and off the device.Three clicks fire button to enter the menu mode.Use the up and down to select a profile (M1 to M5) and press the fire button to confirm.Use the up and down to cycle between modes and press the fire button to confirm.More items...•May 13, 2020
How do you update a SMOK vape?
How Do I Update My Vape Firmware? When you plug in your mod to the PC via the USB, the upgrade software will detect the device and display some basic information about the mod, including the current firmware version. Then, click on 'UPGRADE'.Nov 30, 2021
How do you reset a SMOK morph?
Smok Morph 2 Mod – Screen Display and FunctionalityPress the fire button 5 times to power the device on/off.Hold the fire button to vape (the device will cease to fire after 8 seconds)Holding the fire and right menu button will change the colour scheme.Press the fire and left menu button to reset the puff counter.More items...•Feb 21, 2021
How do you reset the SMOK vape puffs?
You can set the "puff clear" or "puffs reset": Click "No"= Quit resetting the puff, you will not be able to vape; Click "Yes"= Puff data will be set to 0.
How To Fix The GeekVape No Coil Detected Warning
Before we begin, we first need to make you aware that when you receive the GeekVape No Coil Detected warning, the culprit is often a connection issue between the device, tank or atomizer, and the actual coil.
The No Coil Detected Check List
Inspect the connection on your mod and make sure it doesn’t look disturbed or different than normal.
