Replacing the o-rings on your Zlide is actually quite a simple process. The first step is to remove all e-liquid and the coil from your atomizer. Next, you’ll want to fully disassemble your atomizer, making note of where each and every o-ring is placed.
Where do the O-rings go on a vape?
There is no right or wrong answer for where O-rings go on a vape tank, as it will change dependent on your own product. However, some common places include: When you unscrew your tank to replace the coil, look at the threads located at the bottom of the chimney.
Where do the O-rings go on Zeus tank?
For the Zeus "Tapered Version", install the Middle O'ring from the package labeled as "middle" to the slot above the threading in the photo below. For the Zeus "Flat Bottom", there will be O'rings included for this location, but they are not needed.
How do I change my Cerberus glass?
1:285:30How to replace a geekvape cerberus coil. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise.MoreAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise. The whole tank should come apart. So you pull the top off and then you can grab your glass.
Do vape tanks need to be replaced?
Your tank just isn't performing like it used to. Some common performance-related signs that you need a new vape tank include: Decreased vapor production. Weaker flavor. Your coils are dying out too quickly.
Why is my Zeus tank leaking?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It's a common problem with even the most popular sub ohm tanks.
Why is my Zeus tank spitting?
Sometimes referred to as spitback, this can happen when there's too much e liquid in the centre of your coil. This can't be vaporised properly and it bubbles or pops like water being brought to the boil. As you inhale, some of these 'pops' may shoot up the centre post of your tank.
How do I replace the glass in my vape?
0:461:42How To Vape - Changing The Glass Of An Aerotank Mega - YouTubeYouTubeStart of suggested clipEnd of suggested clipVery simply you want to unscrew the bottom of the atomizer. Not just the airflow control valve. ButMoreVery simply you want to unscrew the bottom of the atomizer. Not just the airflow control valve. But the entire bottom portion of the atomizer. Like. So once you take off the bottom.
How do you fix a broken vape glass?
1:082:36Emergency Vape Procedure - Broken Glass - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust keep these coil saturated. So like that just put a bit on the little holes of the coil justMoreJust keep these coil saturated. So like that just put a bit on the little holes of the coil just like you can see I'm doing there little bit of juice. There.
How do you remove a glass tank from a vape?
3:004:45Removing Glass From a Sticky Subtank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can twist it and your glass should come off what that does just you're playing with thermalMoreYou can twist it and your glass should come off what that does just you're playing with thermal expansion. And contraction. Basically the glass is gonna be warmer.
How often should I replace my vape tank?
If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks. Whatever your vaping habits, though, you should consider e-cig Coil Replacement at least once a month.
How long should a vape tank last?
In conclusion, the average device will last you around about 6 to 7 months. Obviously, this will depend a lot on the type of products that you use, the length of time that you use your device for each day, and the overall build quality of what you're using.
How do I know if my vape tank is bad?
Flavor is Weak Maybe it will taste weak, or perhaps it'll have a burnt taste. Either way, if you feel like no matter which e-juice you purchase, you aren't getting a great taste, consider the fact that it's time to buy a new tank.
Can you buy replacement O-rings?
Over time you might see that the O-ring on your tank is starting to wear out and break. The first sign of a worn O-ring will be some leakage as the tank will no longer be held securely and will start slipping around.
What are the best type of vaping O-rings?
Most vaping O-rings are made from nitrile or neoprene. That’s probably what the ones with your tank are made from.
How to replace O-rings in a vaping tank
There is no right or wrong answer for where O-rings go on a vape tank, as it will change dependent on your own product.
Are O rings the same as vape bands?
Don’t confuse O rings with vape bands. They are two very different things.
uthinkofsomething Ultra Member ECF Veteran
This is probly a stupid answer but: don't put the ring on the glass, put it on the other part and then put the glass down on it. And use a little juice for your "glue" it may make the ring stick... Best I've got, hope it helps.
NealBJr Ultra Member ECF Veteran
It's a Teslacigs Terminator starter kit. Maybe the pic I uploaded helps?
Vinnybagodoughnuts Ultra Member ECF Veteran
If it is the O-Ring on the Top Cover, it looks like it just sits there.
stols001 Moved On ECF Veteran
Well I'm glad BOTH your problems are "fixed." LOL. I've done stuff like that. Yes, there are many 0 rings in tanks that can shift around and even become deformed, your tank should've (probably) come with spare O-rings and sometimes more than one set.
stols001 Moved On ECF Veteran
I have owned horses in my youth, and yeah, I have stolen my fair share of cigarettes (usually in view of the person though). Then I had a kid. Horses and a kid are unsustainable in my opinion.... I am now too old and poor to consider horses, although I still ride from time to time. LOL.
BrotherBob ECF Guru ECF Veteran
Oh my god I was trying to add the glass straight on without the atomiser. I thought the o ring was the reason it wouldn't screw. Fixed!!!
The Zlide is not producing flavor or vapor
Check that the vaporizer has power, is powered on and that the atomizer is properly connected to the battery. Next, ensure that you are operating your coil within a wattage or temperature range that is compatible with your atomizer. Too little power can result in no flavor or vapor.
When should I change the coil in my Zlide?
Replace your coil once you begin noticing a degradation in your flavor experience and a reduction in vapor density. If you are vaping a sweet e-liquid that contains added artificial sweeteners, you may have to change your coil or wick more often.
E-liquid is leaking from the atomizer airflow
Check that the Zlide o-rings are undamaged and firmly in place. When refilling your atomizer, close the airflow control ports. After letting the coil sit for a few minutes, open the airflow control port back up to your desired setting. If your atomizer continues to leak, replace your coil.
E-liquid is spitting up from the mouthpiece
If the vaporizer has not be used for a period of time then spitback may occur due to condensation. Spitback is also not uncommon on your first few vapes on a brand new coil or a coil that has been sitting in a full tank of e-liquid for some time.
What is the best way to clean and maintain the Zlide?
A full disassembly of your Zlide is recommended when switching e-liquid flavors, or when you’d just like to clean your atomizer. Carefully unscrew all sections of the atomizer and remove the glass section. Place the parts onto a paper towel or clean rag.
How do I replace the o-rings on the Zlide?
Replacing the o-rings on your Zlide is actually quite a simple process. The first step is to remove all e-liquid and the coil from your atomizer. Next, you’ll want to fully disassemble your atomizer, making note of where each and every o-ring is placed.
How do I replace the atomizer glass?
Disassemble the Zlide by unscrewing the base and carefully separate all parts. Broken glass must be disposed of carefully and safely. Check o-rings for damage and proper placement. Attach replacement glass and reassemble the Zlide. Replacement glass can be ordered at www.innokinstore.com.
