Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting. Adjustment buttons lock/unlock: keep pressing + button and - button simultaneously for two seconds when the device is powered on to lock and unlock the two adjustment buttons. Turn display upside down:
What is the difference between eleaf ™ and istick ™?
In the end of the battery, there are two laser markers, one named “Eleaf ™” and on the other side is “iStick 50W”. On the bottom of battery, there is a laser marker named “CE” .
How do I unlock the low-voltage protection?
Unlock the Low-voltage Protection: When the voltage of battery is above 3.65V, the low-voltage protection will be unlocked. Low power Alert: If the power of battery is lower than 10%, the power symbol on the screen will flash.
How to change the wattage of the vape mode?
Press the + or - button to switch among VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button once or stay in the interface for about 10 seconds to confirm the vaping mode you chose. in VW mode, the wattage can be adjusted by pressing +/- button.
How do you unlock the key lock on a Eleaf vape?
0:191:33How to Lock and Unlock an Eleaf iStick Pico 75w - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold him for a couple seconds boom unlocked and now there's no ID on there you know I can adjust theMoreHold him for a couple seconds boom unlocked and now there's no ID on there you know I can adjust the power. So again to lock it if you do want to lock it.
How do you unlock a vape mod?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do I reset my Eleaf vape?
The iStick Power can be charged through the USB port at the bottom of the device via 1A wall adapter or a computer. The iStick Power can be reset by keeping holding the up button and reset button simultaneously in case it could not be powered on after upgraded.
How do I unlock my Eleaf 80w?
Equally, if the temperature is set at the lowest Fahrenheit (200℉) and you continue to press the down button, the temperature reading will automatically change to the highest Celsius (315 ℃). simultaneously for two seconds to lock or unlock atomizer “base resistance”.
Why is my vape not unlocking?
The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.
How do you unblock a vape?
Best ways to unclog a vape Hair dryer method: This method works best if your cartridge is clogged with oil. ... Unclog with a sharp object: Use a sharp, thin object to poke a hole through the pin. ... Trying taking dry hits from your vape with the battery turned on.
How do I unlock my Eleaf Istick power 2?
1:173:20Eleaf iStick Power 2 Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can lock and unlock your device by pressing the fire button three consecutive.MoreYou can lock and unlock your device by pressing the fire button three consecutive.
How do I reset my Eleaf Istick 80w?
The iStick Power can be reset by keeping holding the up button and reset button simultaneously in case it could not be powered on after upgraded.
What is bypass mode?
Bypass mode You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you're using.
How do I unlock my Eleaf Istick 20w?
0:311:40How To Unlock an Eleaf iStick (20w, 30w, TC40w) - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is that you hold down the up and down arrows for a couple seconds. And you will see that it isMoreIt is that you hold down the up and down arrows for a couple seconds. And you will see that it is now unlocked.
How do I use my Eleaf Istick 50w?
2:445:09Eleaf iStick 50w - Vapor Authority - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold down the up and down buttons for three seconds. This locks it if you'd like to unlock. HoldMoreHold down the up and down buttons for three seconds. This locks it if you'd like to unlock. Hold down for three seconds.
How do I use my Eleaf vape?
2:026:41Eleaf iStick - HOW TO and Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo turn it from wattage to voltage mode you click the button three times slow. And switches to whereMoreTo turn it from wattage to voltage mode you click the button three times slow. And switches to where it now shows four point one volts. And. So as you push the button.
How long does it take for an iStick 50W to charge?
iStick 50W is charged through USB port on the side of battery. It will take 5 hours to fully charge the battery via 1A wall adaptor. The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and keep shining for 10 seconds then go out.
What is the name of the laser marker on the iStick 50W?
High-safety,high-capacity, high-magnification and high-stabilitylithium battery. In the end of the battery, there are two laser markers, one named “Eleaf ™” and on the other side is “iStick 50W”. On the bottom of battery, there is a laser marker named “CE” .
JakeO New Member
I accidentally locked the up and down buttons by pressing both of them simultaneously for 2 seconds, I have tried unlocking them by doing the same thing like the instruction manual calls for. It doesn’t work, no “unlock” pops up or anything. You can hold them as long as you like and...nothing.
Izan Vaping Master ECF Veteran
If the buttons are not functioning correctly, it may be the beginning of the end for your unit.
r77r7r ECF Guru ECF Veteran
Sometimes they just flake out. My vaporesso is stuck on Bypass. The option to leave it is simply Gone. I has my first mechmod .
JakeO New Member
If the buttons are not functioning correctly, it may be the beginning of the end for your unit.
JakeO New Member
I am currently trying to update with the official eleaf firmware and am getting this message? Any ideas?
TrollDragon ECF Guru ECF Veteran
I am currently trying to update with the official eleaf firmware and am getting this message? Any ideas?
Alien Traveler Vaping Master ECF Veteran
I have two different modes (one of them iStick 75) both of which in cases like yours respond to 5 pressings on fire button.
