How to make vape juice?
When you get your package, use the pipettes to drip about 10-20 drops of flavoring in one of your empty bottles. Fill your bottle up to the middle with PG and the rest with VG. Shake and set aside for a few hours to let the bubbles settle. Try your vape juice, and adjust to taste. You now have 50 mL of vape juice that you made!
What is the best e-juice calculator for vaping?
eJuice Me Up (desktop) — an easy-to-use offline desktop-based calculator that saves your recipes locally. If you are planning on using it for mixing by weight, make sure you click on Tools and then Grams Set. To save some time, I suggest using ELR’s default values there: Vape Tool (Android) — a beginner-friendly app for all things vaping.
What is the best nicotine strength for vape juice?
For beginners trying out how to make DIY vape juice, you can choose any nicotine strength between 8 to 24mg and then experiment with it to find your sweet spot. If you want an apples-to-apples comparison with nicotine found in tobacco cigarettes, consider the following table:
Is it better to mix vape juice by volume or weight?
Note: I recommend mixing by weight as it’s cleaner and more accurate for smaller quantities of e-liquid (like batches under 100 mL). Mixing by volume is fine, and many pros prefer doing it that way, but it can get messier than mixing by weight in most cases. What do you need to make your own vape juice?
What wattage is best for 70/30 vape juice?
E-liquid devices over 1 ohm E-liquids that produce a more noticeable hit with less of a focus on taste intensity and vapour clouds have a high PG ratio (e.g., a 70/30 PG/VG ratio). The device's product information will recommend a wattage setting. For example, you could find that a 1.6-ohm coil may need 12 watts.
How do you make your own vape juice ratio?
Sample E-Juice Recipes70/20 VG/PG blend (approximately 16 ml and 5 ml)Diluted nicotine (according to the strength, as desired)5 ml Coconut Milk flavoring.5 ml Chocolate Roll flavoring.3 ml vodka or distilled water.
What vape juice is 70 30?
The 70 VG / 30 PG Vape Juice is a type of e-liquid that contains a mixture of two bases, which include 70% Vegetable Glycerin and 30% Propylene Glycol. Vegetable Glycerin is a thick, natural liquid with a sweet flavor, which has a shorter shelf life due to its organic ingredients.
Can I use 70/30 vape juice?
Go for low to no nicotine, ideally you don't want to dilute your shortfill at all. Aim for a 70:30 juice, while 50:50 are generally better for flavour in lower powered devices they'll be too harsh in a Sub ohm device.
What does 70 PG 30 VG mean?
An e-liquid with a VG:PG of 70:30 will contain 70% vegetable glycerine and 30% propylene glycol.
What is the best VG PG ratio?
90VG/10PG. For those who are less concerned with the flavour of their e-liquid and enjoy producing massive clouds when vaping, 90% VG/ 10% PG is the perfect ratio. This mixture is ideal for use on high wattage vape devices.
What's the difference between 70/30 and 80/20 vape juice?
Like we said, the more vegetable glycerin in an e-liquid, the thicker the clouds will be. This is because VG is thicker, and so the clouds are denser as a result. This means that an 80/20 ratio of VG/PG is going to give you bigger clouds than a 70/30 VG/PG ratio.
Is Vegetable Glycerin safe to vape?
Vaping propylene glycol and vegetable glycerine may lead to lung inflammation. Researchers have found that using e-cigarettes with the e-liquid refills containing propylene glycol (PG) and vegetable glycerine (VG) may lead to inflammation of the lungs over a period of time.
What does 70% VG mean?
vegetable glycerinLike PG, VG is also classified chemically as an alcohol. As it's a lot thicker than PG, it takes more power to vaporise which in turn is why you get so much more vapour with high VG e-liquids. Generally, we'd classify a “high VG e-liquid” as anything with 70% or more vegetable glycerin.
Is 70/30 PG VG good?
70% VG/30% PG: (70/30) This is the best level for those who are interested in lots of vapor but still want to notice at least a little throat hit as well. 30/70 produces a smooth feeling that doesn't overpower them when inhaling, and big clouds when exhaling.
Is lower ohms better for vaping?
Simply put, ohms is a measure of electrical resistance or how freely electricity is able to travel. Lower ohms will produce more heat and this will affect vapor production, throat hit, temperature of vapor and flavor.
What juice is best for sub ohm vaping?
Vape juice for sub ohm vaping must have at least 70% VG content. A 50/50 or PG e-liquid will not work for sub ohm vaping. VG juice is thicker and made for low resistance vape coils.
How to make vape juice?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don’t necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
What is DIY vape juice?
DIY vape juice: be the maker and vaper. DIY vape juice is the homemade version of retail e-liquid. The same ingredients are used, but with infinite flexibility and customization. DIY e-liquid is a creative and cost-saving solution to the growing uncertainty surrounding vaping in 2020.
What are the ingredients in e-liquid?
Here is your checklist: Base liquid – Or in other words, vegetable glycerin and propylene glycol: the two most important ingredients in e-juice.
How to mix DIY e juice?
Methods to mix DIY e-juice: weight and volume . There are two ways to mix DIY e-juice, and each comes with a set of pros and cons. Mixing by weight: with the use of a scale, each ingredient is introduced to the mix by weighing it and taking its specific gravity into account.
How many syringes should I use for a nic?
You should ideally use one syringe per ingredient, but make sure you have at least three syringes for this recipe—one for your nic, one for VG/PG, and one for flavorings. I used to skip measuring VG when I was mixing by volume, and you could also do that if you know exactly how much liquid fits in your bottle.
How long does vape juice last?
There is little data available on how long these ingredients remain good to vape. It is advisable to store enough juice to last two months. Keep juice out of direct sunlight and in a dry cabinet to make it last longer.
What is the best base for vaping?
Propylene Glycol (PG) It’s the preferred base liquid of most DIY vape juice makers. However, some may have allergies to propylene glycol. It’s a federally approved, colorless, odorless organic chemical compound used in various products, including tobacco, foods, and more.
What does it mean when your juice is changing color?
In fact, a color change is a sign of your juice being properly steeped. When it comes to steeping there is nothing absolute. For better steeping, you need two things: patience and experimentation.
What to use to wipe off nicotine?
Even the best of us spills, so it’s better to be prepared, especially when learning how to make DIY vape juice. Pair of Gloves. Since you’ll be dealing with nicotine, it’s ideal to use gloves .
How long does it take to steep a juice?
There is no predefined period as to how long the juice should be steeped, but it can take a few days or even several months.
How much flavoring is needed for e-liquid?
While the usual mix requires about 10-20% flavoring, some are strong enough to require only 5%.
Why do you put tissue paper on vapes?
The tissue paper is to wipe off any excess liquid that might spill. Even the best of us spills, so it’s better to be prepared, especially when learning how to make vape juice.
What does VG mean in e-liquid?
VG is Hydroscopic, which means that it will absorb water from the surrounding air. This is important to note as it will contribute to causing mild dehydration if one does not keep up with adequate liquid intake. It is important to note that not just any VG will do for use in your e-liquid.
What is a pipette?
Pipettes -A great way to extract your juice or nicotine from the larger containers to place into your measurement vessel. These are typically disposable and very cheap to acquire in bulk. Treat them as single use items. Oftentimes they hold 3mls of liquid and have notches up the neck at ¼ ml increments up the neck.
Does warm water bath thin VG?
This helps steep a liquid, but in and of itself isn’t the whole process. Warm water bath - There is some doubt about the actual viability of this method. Nevertheless, the theory is that warming the liquid then agitating it will thin your VG and allow the flavor molecules, nicotine, and PG to bind to it more readily.
Is PG smoother than VG?
It is important to note that while VG is very smooth, PG does produce a mild “throat hit” and is often in modern e-liquid reduced to about 30% or less of the finished product to allow the liquid to remain smooth while still carrying a satisfying flavorful experience.
Is it safe to drink green liquid in a car?
The green liquid used in your car is Ethylene Glycol, and is not safe for human consumption. Propylene Glycol on the other hand may be used in larger scale office buildings as antifreeze in the heating and cooling systems as it is much safer.
Is PG a good antifreeze?
It is used in a myriad of varying markets, and is the part of e-liquid that is often referenced as being used as antifreeze.
Can you use VG in e-liquid?
It is important to note that not just any VG will do for use in your e-liquid. Some people are comfortable using food grade product but, whenever possible, USP or pharmaceutical grade VG is your very best bet. This ensures the greatest purity VG for use in your e-liquid.
How long does it take for e liquid to taste good?
Many e-Liquids will start to taste much better if they are allowed to steep for days or even weeks. Once you shake it, leaving the cap off and letting the formula sit and “breath” for a few days is a good idea for most flavor combinations.
What is a syringe in eliquid?
Syringes - Syringes and pipettes are an essential tool for helping you negotiate the small openings on containers and getting the right amount of liquid from your supply into your eLiquid creation. They let you extract exactly the amount of nicotine, PG/VG, or flavor you need and transfer it to your mixing container.
Why is 100mg/mL diluted?
Generally, 100mg/mL diluted nicotine is used in the industry because it makes the math to get specific strength per volume a little easier. Also, a relatively small amount of 100mg/mL can go a long way, and allow for more flexibility in your diluent ratio.
What is vaping community?
The vaping community is as much about individuality and personalization, as it is about great taste and choices. Whether you are new to vaping, or have been vaping for a while, you’ll eventually think to yourself “I wish I could get a flavor that tastes like…” or maybe even “I wonder if I could make something myself that is just as good as…”.
What is the ratio of PG to VG?
Most e-Liquids have a mix of both presented as a ratio of PG to VG. Common ratios are 70/30, 50/50, or 30/70. Flavor concentrates are generally diluted with PG, which is why you will commonly see MaxVG as the description rather than 100% VG. Both PG and VG are perfectly fine for vaping, but you’ll probably want a little ...
What is the most cost effective bottle for experimentation?
Checklist: Bottles - At a minimum, you’ll want some bottles. Plastic drip tip bottles tend to be the most cost effective option for experimentation, because getting bottles clean enough to re-use for a different flavor tends to be more work than it is worth.
How to get air out of a needle?
If you notice any air in the syringe point the needle up, tap the syringe to get the air to the top, then carefully depress the plunger until the liquid just starts to appear at the tip of the needle. Then you can point the needle back in the container and depress the plunger to the right measurement.
What do vapers focus on?
Beginning vapers are likely to focus primarily on two things: their hardware and the flavors and nicotine levels of their e-liquids. After they gain some experience with vaporizers, their attention usually turns to the effects of variable voltage and wattage, and they may move on to mods.
Is VG a good base for vaping?
However, the boring details about PG and VG aren’t necessary for most vapers to study. Both bases are considered safe and are widely used in a variety of consumable products. The one major “health” issue to consider is that a small number of people are allergic to propylene glycol, experiencing symptoms like hives, rashes or upset stomachs. PG can also cause throat irritation for some, for reasons which will become obvious in a moment. Switching to an eliquid with a VG base may be necessary for these vapers.
What is AVG in a liquid?
AVG stands for aqueous vegetable glycol, which is essentially just vegetable glycol thinned down with 10% distilled water. Ideal if you want to mix at a higher VG ratio without ‘gumming’ up your coil! Also especially handy for those of you with a PG intolerance! If you want to use our e liquid calculator to mix with AVG, ...
Can you add a dilutant to a VG e-liquid?
Dilutant can be added ( distilled or pure water, even vodka!) to ‘thin’ your e-liquid. This is mainly done when using high or Max VG e-juice due to its thick consistency. Diluting thick e-juice helps your wick saturate more efficiently and even helps prolong your coil!
Can you mix e liquid?
Yes you can! Experimenting with different flavor mixes is one of the best reasons to start mixing your own e-liquid! Just hit the ‘Add’ flavor button on our e liquid calculator to add extra flavors! We’ll be adding our top picks for flavor recipes in the near future so be sure to check back soon!
Is e-liquid dangerous?
It’s considered a toxic substance and dangerous if not used with precaution! If you’re a complete newbie to the world of DIY e-liquid mixing then be sure to start by reading our complete beginners guide to mixing your own e-juice. Alternatively, if you’ve come here with a Nicotine Shot or Shortfill bottle, head on over to our Nicotine Shot & ...
Flavour Concentrate
The flavours you would like to add. Flavours displayed as a percentage.
Buy DIY Mixing Products
Our DIY mixing kit comes with all the essentials for premixing your own e-liquid.
Amount To Produce
Input the total amount of e-liquid you wish to make. You can change this at any time and the overall ingredient measurements will adjust accordingly.
Desired Nicotine Strength
This is where you input your overall desired nicotine strength you wish to vape at.
Nicotine Base Strength
Leave this at 18mg if using our NicIt Up or amend accordingly if you have another nicotine strength.
Nicotine Base Ratio
Nicotine also has its own VG and PG ratio, just input the ratio in this section as displayed on the nicotine bottle/label (select “Custom” and change accordingly).
Flavour Concentrate
We recommend mixing the flavour between 15% - 20% (with 20% being the most preferred) and all our flavour concentrates are 100% PG based. Please note that if you are mixing Black-Jack or other strong menthol or Icy/Minty flavours, we only recommend mixing between 10% - 12% due to the strong nature of the flavour.
