- Unscrew the mouthpiece.
- Open the blu Liquid bottle by pushing down on the cap and turning it to the left.
- Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill.
- Carefully replace the lid on the blu Liquid and screw the mouthpiece back onto the clearomiser.
- Screw the clearomiser onto the battery.
- Before using, allow a few moments for the liquid to settle.
- Remove your device and Liquidpod from packaging.
- Unfold the attached USB cord from the pack and plug it into a USB-compatible charging port.
- Connect the rechargeable device to the USB cord with the charging contacts properly aligned.
How do I charge my blu PRO rechargeable device?
Complete the following steps: Remove your device and Liquidpod from packaging. Unfold the attached USB cord from the pack and plug it into a USB-compatible charging port. Connect the rechargeable device to the USB cord with the charging contacts properly aligned. Once your device begins charging, ...
How do I know if my Blu is fully charged?
Oct 01, 2018 · To charge myblu, follow these steps: Plug the USB charging cable into a USB-compatible device and then plug the cable into the port at the base of the device. The tip of the device will glow blue to show that it has started to charge. Leave …
How do I charge my liquidpod?
Oct 01, 2018 · For the blu PRO™ e-cigarette, the charging socket is located on the side of the battery component, which is the bottom part of the device when it’s fully assembled. The PRO™ will recharge from empty in 4 hours - just plug the USB cable into the device when it needs recharging, and wait until the LED light turns blue.
How do I charge my Blu-ray player?
Oct 01, 2018 · How do I charge my blu PRO™ Kit? Unscrew the mouthpiece. Open the blu Liquid bottle by pushing down on the cap and turning it to the left. Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill. Carefully replace the ...
Can you charge a blu?
(Note: According to the Blu website, you should not leave the battery in the USB charging port for more than twenty-four hours). Charging your Blu devices is extremely simple, and is purpose-built to cater to those new to the community.Nov 1, 2018
Why does my blu vape flashing blue?
When the blue battery light starts flashing it's time to recharge the device. Simply unscrew the clearomiser (tank), and screw on your safe-charge USB cable onto the battery, plug it into your blu mains adaptor (sold separately) or USB port. (Note: ONLY use the charger supplied with the blu Pro Battery).
How do you know when your blu is charged?
When the device battery indicator turns red, it is time to recharge your device. You can also monitor the level of charge by the color of the device indicator light located on the bottom of your device: BLUE indicates the device battery has 20-100% remaining charge.
What kind of charger does blu use?
USB charging cordThe blu device comes with and should be charged by a USB charging cord. One end of the charging cord attaches to the end of the device. The larger end of the cord inserts into a standard USB port (such as those found on a laptop). The USB Wall Charger found in our online store can also be used with the blu device.
How long does it take to charge a blu vape?
around 45 minutesFor the myblu™ vape pen, the charging socket is located on the bottom of the device, beneath the LED light. It will take around 45 minutes to recharge your myblu™ device from empty.
Why is my blu not working?
Myblu isn't producing any vapour This can be caused by several things: the pod may not be fully inserted, there could be some liquid or residue between the pod or the battery connection/metal conductors on the pod may have been pushed down too far.
Why does my Blu blink 5 times when I plug it?
Short circuit protection If a short circuit occurs during operation, the indicator light will flash 5 times and the unit will shut down. Was this article helpful?Mar 12, 2020
Why is the light on my battery charger blinking?
The CHARGE light may flash for the following reasons: The environmental temperature is too cold to charge the battery pack. The battery pack has not been used for a long time. There is a poor connection between the battery and charger.Jul 23, 2019
How long does my Blu battery last?
The length of time your Blu Pro battery will last depends on how often you use it, but as a guide, this battery should allow 12-14 hours of vaping before needing a recharge.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.Mar 29, 2018
What does a blue light mean on a vape?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.Sep 7, 2021
How much is a blu charger?
$9.95. Available for the myblu™, this e-cig wall charger is compatible with any standard 120v wall outlet. Prongs are retractable for easy fold up and storage.
What charger should I use with the blu® device?
We do not recommend that you use any other charger or charging cord sold by a third party as it may not meet voltage and current requirements for t...
How do I charge the blu device?
Complete the following steps: 1. Remove your device and Liquidpod from packaging.***2. Unfold the attached USB cord from the pack and plug it into...
How do I know when the blu® device needs to be recharged?
• BLUE indicates the device battery has 20-100% remaining charge.***• ORANGE indicates the device battery has 5-19% remaining charge.***• RED indic...
How do I use blu® Liquidpods?
1. Select your preferred Liquidpod and remove from packaging.***2. Insert the Liquidpod into the rechargeable device. You will feel it click into p...
How long does the blu® device battery last?
All blu devices are covered by a limited one-year warranty. If your device stops working during the warranty period, you can request a point exchan...
What are the safety features of the blu® device?
If you take a single puff lasting 10 seconds or more, the blue indicator lighting will flash 10 times and your device will shut down and reset afte...
How do I charge myblu?
Every myblu is shipped with a partial charge but we recommend charging it fully before you start using it. To charge myblu, follow these steps:
How do I refill myblu?
myblu is refilled using liquid pods which click onto the device. When each is finished, simply remove by lightly pressing on the sides of the liquid pod. After disposing of the old pod you can immediately attach a new one to the myblu.
How do I know when to recharge or refill myblu?
The light on the tip of the myblu will turn red when it needs to be recharged. When this happens you may also notice a weaker flavour or less vapour being produced. The myblu battery will last for approximately 4 hours between charges depending on how much you use it.
How long does it take for a vape pen to charge?
Charging usually takes between 1 and 3 hours, depending on the device.
How do vape pens work?
Vape pens are powered by batteries which in turn can be topped up whenever they run out of charge. You'll need to plug your charger into your device regularly to keep using it. Vape pens are powered by batteries which in turn can be topped up whenever they run out of charge.
