- Preheat your oven to 220 – 225 F (105 C), as the first step to making your own THC oil involves slowly heating up your bud. ...
- Bake for approximately 30 minutes or until the buds are dry, and begin turning a shade of golden brown.
- Put the material in one of the jars, that has preferably been frozen before beginning. The cold temperature promotes the detachment of cannabinoids and terpenes from unneeded fats and lipids.
- Pour the alcohol over the flower in the jar, completely submerging it. ...
- Cover your second jar or a large glass measuring cup with your cheesecloth. ...
- Now you’ll work to purge the alcohol from the liquid. If possible, open a window in your kitchen or turn on a vent fan. ...
- Let the jar simmer for approximately one hour, stirring occasionally.
- Once the alcohol has evaporated, it’s time to add your thinning liquid – either the PEG400 blend or PG/VG. ...
- Next, you’ll fill your empty vape cartridges. If you’re only filling one vape cartridge at a time, we’ll discuss how to store the bulk batch below. ...
How to make your own CBD THC oil?
Oil Method
- To get started, choose buds, leaves, and stems of a high-quality cannabis plant. ...
- In a mason jar, mix the ground-up weed with the carrier oil of your choice and then saturate the weed with the oil. ...
- Once the saturation has occurred, it is time to bring the oil-weed mixture to a boil. ...
- On the bottom of the pan, place a towel. ...
How to make cannabis oil with THC?
- Fill your rice cooker ¾ of the way full with your alcohol-oil mix. ...
- Turn the rice cooker on “High” or set it to the “White Rice” setting.
- Allow the solvent-oil mixture to boil down.
- When the solvent-oil mix is becomes a thick, dark green liquid, put on oven mitts, remove the pan from the rice cooker, and gently swirl the mixture. ...
How to make strong THC eliquid you can vape?
- Propylene Glycol – you can buy this from Amazon and it costs about $7
- The recommended dosage of cannabis is 6 grams, but you can use more or less depending on how strong you would like it to be. ...
- High proof grain alcohol. ...
- 2 mason jars
- Some 5ml dropper bottles
- Cheese cloth (for filtration)
- A baking tray and aluminum foil
- A cookpot and an oven
How to make cannabis oil to vape?
Here are the things you will need:
- 1 to 1 ½ ounce of nicely ground cannabis, buds or trim (decide the dose depending on your preferred potency
- 28 ounces of coconut oil or extra virgin olive oil
- A big pot
- A stirring spoon
- A stovetop with controllable heat
- A big mason jar or airtight container
- Several pieces of cheesecloth
How do you make THC wax liquid?
Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
What can you mix THC oil with?
Here are 10 tasty ways you can consume your cannabis oil with:A spoonful of peanut or almond butter.Strong herbal teas such as mint with honey or ginger with fresh lemon.Sweet, fresh fruits like mango, pineapple or mandarins.A smoothie with frozen fruit and sweet vanilla yogurt.More items...•
How do you make your own vape liquid?
1:182:52How to make Vape Juice - Beginners guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck out make my bakes recipe and they're also a liquid calculator. So make sure you're getting theMoreCheck out make my bakes recipe and they're also a liquid calculator. So make sure you're getting the perfect flavor. And also make sure you use the calculator to check the measurements of VG PG.
Can I put honey in my vape?
Heating up honey causes it to caramelize and bubble, not vaporize. Trying to vape honey would undoubtedly ruin the coil and be a complete mess in your tank, not to mention ruining perfectly good honey.
Can I put water in my vape?
The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.
Can I vape vegetable oil?
Vegetable oil and vitamin E can help deliver desired drugs to vapers. But they may also cause harm, especially if they're not heated up right. In theory, vape users should not be ingesting any liquid oils when they inhale, only the vapor from e-cigarettes that looks like white smoke.
How long to boil THC in oil bath?
After you’ve filtered all of the liquid through the cheesecloth, you’ll want to boil the refined THC liquid in your oil bath at 220℉ for about 30 minutes to fully decarboxylate the THCA into THC (you’ll have to increase the temperature of the “outer” oil bath in order to get the temp of the “inner” glass jar to 220℉).
How much vape juice is in an eighth ounce of weed?
Here are the materials that you’ll need to use this method: Marijuana flower/buds (you can use as much or as little as you want, but for reference, an eighth oz (3.5 g) of weed will produce about 30-60 mL of vape juice.
How to add terpene to a glass vial?
Dropper bottle (for adding The Terpene Potion to the glass vial) Basically, this method involves using a hair straightener to press rosin from a raw marijuana nugget, collecting the rosin off of the parchment paper, adding in a few drops of The Potion Terpene Solution, and heating it up to mix it together.
How long to bake cannabis concentrate oil?
In the first method, you’ll remember that we “baked” our broken down buds in the oven at a temperature of 220℉ for about 25-30 mins.
How long does it take to grind cannabis?
This method essentially involves grinding up raw cannabis flower (high THC), and then saturating it with food-grade vegetable glycerin and letting it sit for a really, really long time (up to three months), while stirring it/straining it every several weeks.
How long does it take to heat a VG?
So this method involves pretty much the same process as the first method, although it involves heating the cannabis/VG mixture to drastically speed up the process (from three months to only about 3-4 hours). Here are the materials that you’ll need: Raw cannabis flower. Pure USP food grade vegetable glycerin.
How long to let e-liquid sit in a glass jar?
After 45 minutes, remove the glass jar from the oil bath and let it sit for a few minutes to cool down. Then, place your fine mesh strainer on top of a clean glass jar, and dump the cannabis/VG mixture into the strainer. This will be your “first run” of THC e-liquid.
How to make THC vape oil without concentrate?
To do the decarboxylation process we need to: Grind the strain or weed onto the baking sheet with the use of an aluminum foil.
What is THC vape oil?
When you hear the term THC Vape oil, you may already have an idea of what is it. As the name suggests, it is an extracted THC from particular cannabis. This is cannabis oil with high THC concentration. The THC Vape oil is made by extracting the resin of the female marijuana plant by the use of alcohol. This the best method among the other methods ...
How to make a jar of cannabis?
Take your baked cannabis buds and place them inside a jar. Soak the cannabis buds in a jar that is full of alcohol. To submerge, shake the mixture back and forth. Place the jar with the mixture inside the freezer for a minute or two. Get the 2nd jar and then place cheesecloth over it.
What is the THC in marijuana?
In simpler terms, the THC is the one responsible for the high that consumers get in smoking marijuana. This is a psychoactive compound that will allow you to experience a strong mental and psychedelic high. The THC is responsible for uplifting the mood, boosting the energy and the appetite, and also stimulate the brain to become creative.
How does cannabis affect the brain?
The THC component of cannabis affects the brain’s function particularly thinking, memory, movements, pleasure, sensory, concentration, and also time perception. A strain with a high potency can let you experience a strong mental high which can alleviate the mood and allow you to experience happy emotions.
How to make a concentrate from a mason jar?
Pour the mixture through. To get the most of the mixture, squeeze the cheesecloth over the mason jar. In the 2nd jar which is filled with liquid and alcohol add a bit of water and then place the jar inside the pot. This is to boil the concentrate until you get about 5 ML of liquid left inside your jar.
How long to cook weed in oven?
After heating the materials, break them down on another aluminum foil and leave them in the oven at 225 degrees Fahrenheit for about 15 to 30 minutes.
How to make a vape with a kettle?
I boil a kettle then add a small amount of boiling water to a bowl and set the vial with the mixture in it for a while until they can easily mix. leaving a smooth golden e-liquid. Now your e-liquid is ready to use, Just transfer it into your bottle or vape cart using a syringe and you’re good to go.
What is the liquid that is used to extract THC from cannabis?
And all of them carry the same principals of extracting the THC oil from the cannabis buds and mixing it with a carrier liquid such as propylene glycol (PG), Vegetable Glycerine (VG) or some form of Wax Liquidizer for extracts.
What is a dry herb vaporizer?
If you are unfamiliar with what a dry herb vaporizer is, here’s a simple answer: “A dry herb vaporizer, is a vaporizer that is for vaporizing dry herb, aka flower. ”. These vaporizers are generally easy to use and come in many different styles from portable to desktop vaporizers.
How much cannabis should I mix with liquid?
Here’s what you need! Cannabis flowers – As a rule of thumb you can mix approx 1/4 (7grams) of an ounce with approx 80ml of liquid (adjust as required for different strengths). Food grade Vegetable Glycerin (VG) and Propylene Glycol (PG) Mix. Baking tray or Pyrex oven safe bowl. Aluminum Foil.
Is THC vape oil legal?
For the reason that it has many advantages over smoking. If you find yourself lucky enough to stay in a country or state where Cannabis is legal , you may have seen the rise of Weed-based Vape Juice in Dab Pens.
Community Q&A
Include your email address to get a message when this question is answered.
Tips
When you’re buying ingredients to make vape juice, such as terpenes or commercial liquidizers, check to see if the product comes with a Certificate of Analysis (COA) to verify the ingredients. This will help you avoid any harmful additives or contaminants that could make you sick. [74]
Warnings
Never add vitamin E or oils (such as essential oils, cooking oil, or mineral oil) to your vape juice. According to the CDC, the use of vitamin E in vape liquids has been linked with serious lung injuries. [75]
About This Article
This article was co-authored by Jamie Corroon, ND, MPH and by wikiHow staff writer, Megaera Lorenz, PhD. Dr. Jamie Corroon, ND, MPH is the founder and Medical Director of the Center for Medical Cannabis Education. Dr. Corroon is a licensed Naturopathic Doctor and clinical researcher. In addition to clinical practice, Dr.
How to extract THC from cannabis?
This step seems the easiest, but is the most important. First pour your cannabis in a glass bowl, and then pour alcohol over it. Continue to pour until the solvent is 1 cm above the surface of the plant. Then stir the mixture with a wooden spoon for about 2-3 minutes.
What is cannabis oil?
Cannabis oils are concentrates of the marijuana plant. They are created by extracting cannabinoids from the plant, usually THC and CBD. There are many types of cannabis extraction, such as alcohol extraction, CO2 extraction, solvent-free extraction etc.
How to get cannabinoids out of oil?
The best way to do so (and the easiest) is to do a double boiler: Fill the bottom dish with hot water. Pour the green liquid into the top dish.
How long does it take for THC oil to thicken?
Now that the process is complete, remove the top dish with your green oil and let it cool down for about an hour. As it cools down, it will thicken even more.
How to store oil in plastic syringe?
Fill syringes with your oil. This step is optional, but we recommend that you store your oil in plastic syringes for easier use. Slowly draw the oil into the syringe by pulling the plunger up. If you have extra oil and no more available syringes, you may store the rest of your oil in any glass airtight container.
How long does it take for marijuana to kick in?
This way the THC is absorbed by tongue receptors, and goes directly to the bloodstream. It takes about 15 to 30 minutes for the compound to kick in. As for the dosage, it depends from person to person.
How long to boil alcohol in a pot?
Then turn the burner off, and wait until the last bubble shows. Give it another 15 minutes to make sure all the alcohol is gone, and occasionally stir with your silicone spatula this time.
How long to heat pot for weed?
Step 2: Set heat to “2” or “slightly higher than low, but no where near medium heat” and set the timer to 30 minutes. Step 3: After the timer, attend the pot, gently stir with the fork to ensure all marijuana is evenly distributed throughout the oil. This is the first opportunity to assess the situation.
Why do people vape?
There are a lot of reasons for wanting to vape marijuana instead of smoke it. Combustion is way worse for human health (as far as most research knows so far, vaping is far healthier). Obviously lighters burn at 3000-4600 degrees Fahrenheit, and people smoking small pipes or joints are inhaling this heat. This lung damage is outrageous and the pain is exactly what causes the coughing. Coughing is one of the main reasons people suspect heavier smoke in public. Turning normal marijuana bud into a vape-capable liquid allows it to be inhaled through a vape mod vaporizer. These $150-500 vaporizers are complex, impressive, and have many buttons and features…including the ability to control the voltage and temperatures. This allows users to keep the temperatures at a steady 365-405 degrees Fahrenheit…a drastic difference that makes the lungs smile wide!
How to make eliquid without alcohol?
The Best THC eLiquid Recipe Without Using Alcohol (guide, how-to) Step 1: Place the cooking pot on the direct center of the burner and pour the VG (or PG) solution into the pot. Add the marijuana contribution, being certain to evenly disseminate. The fork may come in handy for this.
What is VG in vaping?
Vegetable Glycerin (VG) is clear, and odorless. VG is also made from plant oils, most famously palm, soy or coconut oil (all of which are extremely good at absorbing THC for cooking with pot, so it makes sense that VG would be great for making the vaping juice best).
Can you vape with vegetable oil?
However, one important fact to understand going into it: the vape juice that is commonly sold in vape stores is not made with typical vegetable cooking oil.
Can you vape dry weed?
It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped. It looks a lot like any other solution that would be in the vape tank. People always seem to assume it is nicotine. In marijuana-friendly states, some pot shops actually sell these ejuice tinctures. But it is possible to make your own marijuana THC ...
Can you make a liquid pot with a vape mod?
Could THC be extracted from weed, turned into an eliquid and used in a vape mod? It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped.
What is THC vape juice?
THC vaping juice, also known as e-juice, e-liquid, or vape oil, is the liquid that turns your bud to vapor when you heat it. It became popular after e-cigarettes hit the market. You can also purchase vape oil with nicotine or CBD.
How to use THC vaping juice?
You use your THC vaping juice in a vape pen. You need to fill a cartridge with the oil and insert it back into your pen. Sucking in activates the battery, which heats the juice and the vapor enters your mouth and into your lungs. Hold for a few seconds and exhale.
THC vaping juice effects
Vape juice with THC is highly potent. Cannabis bud contains from 12 to 35% THC, depending on the strain. Vaping juice contains 50 to 70% THC and can reach as high as 90%.
Why should you make your own THC vape juice
THC vaping juice can be difficult to find in stores, especially if you live in a state where recreational weed is still illegal. If you do find some, there can be a lot of additives reducing the potency.
How to make THC vape juice at home
After reading all of the benefits of THC vape juice, you’re probably wondering how to make THC vape juice? How can a dried piece of the plant turn into a potent oil that can be vaporized? It’s actually a lot simpler than it seems.
The final puff
THC vaping juice is a substance that can be vaporized that’s highly potent and flavorful. You use the oil in your vape pen and suck in the vapor to get high. It’s usually a stronger effect because of how concentrated it is.