After recharging the battery, put the pod back into the device and try vaping again. If your pod system still isn’t hitting, try a different pod. If you’re unable to get the device to start hitting after a pod has leaked, scroll down to troubleshoot your leaking pod system.
- Check if you've pressed the power. Check if you've pressed the power button too often and turned it off. ...
- Check if you need to charge it. ...
- Check for connection issues. ...
- Check our Battery Safety page. ...
- Check your atomiser. ...
- Check your 510 pin. ...
- Check your coil. ...
- Check your tank isn't over tightened.
What should I do if my Smok vape won't turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: 1 Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to... 2 Check the battery to confirm that it’s properly inserted. Depending on your model, you might be able to pull out the... More ...
Why is my vape pen not turning on?
Another issue in common vape problems is that your vape pen isn’t turning on. Do not immediately assume that it is broken. Check if the battery is charged or if there are any problems with the battery’s connection to the vape tank. Make sure that your vape battery is charged or keep an extra device on hand in case of emergencies.
How to fix a vape pen battery that won’t charge?
Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous. Before troubleshooting vape pen battery issues, it’s important to know what kind of battery your vape pen uses.
How do I Fix my vape that won’t puff?
If you cover one of the device’s intake vents with your finger while puffing, you’ll increase the pressure of the air flowing through the disposable vape. That may get the puff sensor working again.
Why will my vape not turn on?
Try a different cable/plug. If still nothing, then it is most likely an issue with the device itself. Either the charging port is faulty, the battery has died completely or the display/LED isn't working properly. Batteries do degrade over time in any device, as is their nature.
How do you fix a vape that doesn't work?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
How do you get a vape to start working again?
Break Air Bubbles If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I know if my vape is broken?
There are some recognisable ways your e-cigarette shows you that it needs a new coil, as well as a few less obvious ones.Your Vape Tastes Burnt. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
Why is my vape flashing and not working?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
Why won't my vape pen heat up?
If your pen's atomizer isn't heating, first to make sure that your battery is charged and turned on. Then check the connection between the battery and your atomizer or cartridge. If it is dirty, clean it with a cotton swab. You will also want to make sure this connection isn't overtightened.
Why does my vape stop working?
Other Issues That Cause a Vape to Stop Working. In general, a long list of problems can be caused by poor maintenance of your device. Just like any other piece of machinery, your vape device needs to be properly taken care of in order to function well.
What to do if atomizer doesn't work?
If that doesn’t work, check to make sure your atomizer coil isn’t dry, and that the atomizer itself isn’t flooded. Finally, make sure that the electrical connection between the atomizer and battery appears to be functioning correctly, cleaning off any dust or grime that may have built up.
What is the downside of a glass juice tank?
The one downside to a glass reservoir is that it is more susceptible to cracking. Examine the tube carefully, looking especially closely at the end caps to see if there are any hairline fractures.
Why does my e juice leak?
One of the top causes of leaking e-juice is a seal that is either cracked, missing, or just misaligned . Your device has several different seals, so examine all of them to see if you notice any crimping, damage, or looseness. Replacing these is an inexpensive fix, and can solve your leak problem altogether.
Does PG juice give throat hits?
Not Enough Throat Hit. PG is the element of the e-liquid that gives a great hit, and if you’re not satisfied, you may need more PG in your juice. Check the PG/ VG ratio. The higher the PG level in a particular vape juice, the more intense throat hit you can expect.
What to do if your vape doesn't turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do when your vape pen makes a gurgling sound?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it . The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
What happens if your e-liquid tank is tight?
Over-tightening your tank can cause premature wear and tear that damages the o-rings.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
Why is my ohm error so high?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
Fix Weak Hits With a Pod System
The device’s temperature protection is engaging because e-liquid isn’t reaching the atomizer coil
Fix a Pod System With a Leaking Pod
If your pod has excess e-liquid inside the atomizer coil assembly, you’ll experience gurgling and spitting – but that’s not all. If the atomizer coil is completely overwhelmed with juice, some of that e-liquid will end up leaking out of the bottom of the pod.
