Re: How to refill Vision Spinner II « Reply #7 on: August 14, 2014, 02:33:09 PM » I believe the Eleaf clearos are basically the same as the Vapeonly BCC - Remove from battery, turn upside down, unscrew bottom, squirt liquid down the side (i.e. not down the central air tube), screw bottom back on, and away you go.
Full Answer
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
How does the vision spinner 2 work?
The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
What is the best battery for a beginner vape pen?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
How do I lock or unlock the vision spinner 2 battery?
To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled.
How do you use a vision spinner 2 vape pen?
3:028:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut down the threads here. And just run it around on the inside. Again. If you it's gunked-up. BeenMorePut down the threads here. And just run it around on the inside. Again. If you it's gunked-up. Been sitting for a while like that. See you'll notice that a little bit of fluid come out of this one.
How do I know when my vision spinner 2 is fully charged?
When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you charge a vision spinner 2 DAB pen?
0:141:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
What is a vision spinner 2?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Can you overcharge a vape?
Don't Overcharge Your Vape Battery By leaving your vape plugged in when it's reached its capacity (fully charged), that extra power doesn't do anything. Well, nothing good, anyway. Overcharging your battery can lead to problems like: Capacity loss, meaning your battery will lose its charge a lot faster.
Why is my vape light blinking?
Generally, a blinking light indicates that the vape pen is trying to warn you that your device is not working as it should or the battery is low.
How do you charge a vape?
How to Charge a Vape PenStart by connecting your power lead to the plug.Now insert the plug into the power outlet in the wall.Then find the power input on your vape. ... Once everything is plugged in, check to see if there's a light (usually solid/flashing red) indicating your device is charging.More items...•
Who makes the vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
How do you charge AV Mod?
V-Mod can be charged via the micro USB charging port with the adapter 0.5-1.0A.
How much is an ooze pen?
$19.95Ooze Slim Pen TWIST Battery w/ Smart USB – Variety of Colors (MSRP $19.95) Ooze vape pens are an industry leader for many reasons.
How do I charge my EVOD twist without charger?
4:155:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do you use the vision spinner 3?
Using the Vision Spinner 3 is super simple; it has a single button that turns the battery on or off with five clicks, and the convenient rotating dial at the base allows you to adjust the power setting. The Spinner 3S variable voltage battery is portable and lightweight, making it perfect for vaping on the go.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
How long does it take for an Ego to charge?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours. Once fully charged remove the battery from the eGo charging Lead.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
Can you charge a battery overnight?
Do not charge batteries overnight. Batteries contain electronic circuits and like any electronic device they can be damaged if dropped, mistreated or immersed in water (or other liquids). Not all USB ports are the same. Only use USB ports that are directly connected to your computer and not extension USB ports.