It’s also a good rule of thumb to not use a sub-ohm tank with a mechanical mod. You want a fixed, protruding 510 pin on the bottom of your atomizer. Subohm tanks use a floating style pin, and this can cause a short in your mech mod.
Full Answer
What can you do if your mechanical vape mod stops working?
· Mechanical vape mods are considered unregulated devices. This means there are no circuits or chips to provide the user with various protections like the following: Low coil resistance. Reverse batteries. Short-circuiting. Shut-off time. Battery overheating. Low battery.
What are the disadvantages of mechanical vape mods?
· The mechanical mod sits firmly within the upper tiers of vaping, offering users a technical and powerful way of vaping. Using a mechanical mod is perhaps the rawest kind of vaping possible, thanks to its unregulated output. It’s important to remember that a mechanical / unregulated vape device is recommended to only the most experienced users ...
Do mechanical mods hit harder than other e-cigs?
· There is a danger inherent in every mechanical mod – the battery. Batteries can fail, due to over-tightening the end-caps of the mod or atomizer. They can also over-discharge due to accidentally pressing the firing pin/button for too long, causing the battery to overheat and potentially burst. Never buy a mechanical mod without seeing it first.
What are mechanical vape mods made of?
One of the biggest dangers with mech mods is a higher potential to overheat, or for the batteries to explode due to poorly built or maintained circuitry. But there are ways you can combat this. Firstly, make sure your mod has proper ventilation.
How do you use a mechanical mod safely?
Proper PrecautionsOnly use reputable batteries.Only use a battery within safe limits (and know the safe limits of your battery)Know how to calculate your current.Make sure you're not shorting your battery.Dont over discharge your batteries.Do not invert your battery/batteries.Hybrid/direct connection.
Is Mech Mods safe?
Mech mod safety relates to the safe use of advanced vaporisers, that don't carry the same safety features as more simpler starter kits. These advanced 'mods' generally are made without automatic safety over-rides and the like, to allow for complete customization.
What's a safe Ohm for Mech Mod?
For a parallel mechanical mod with dual batteries, each rated at 20A, the lowest safe resistance is 0.11ohm. But to ensure that you remain safe, build a bit higher; 0.12ohm would be better to ensure that you're vaping safely within the limits of your batteries and not stressing them.
Why do Mech Mods explode?
If an atomizer draws more current than a battery can safely provide, and there is no electronic cutoff in the device, the battery can overheat and go into thermal runaway. That can cause a fire, or—if the battery can't easily vent the heat—an explosion.
Can a vape mod explode?
Any brand or type of vape pen with a lithium-ion battery could theoretically explode in use. If there is a defect with the battery or if the device is used incorrectly, such as using the wrong charger or getting the battery wet, it could lead to a fire and explosion.
Can I put a sub ohm tank on a mech mod?
There's no issue using a tank on a mech mod, as long as you adhere to Ohm's Law when choosing the coil size and battery capacity. It's technically possible to connect any 510 threaded vape tank to any similarly threaded mech mod. Just make sure your device is ventilated.
Is it safe to use full Mech vape?
One of the most prevalent issues preventing people from using a full mech vape is safety, particularly battery explosion or battery venting. Battery venting can occur whether you are using a regulated mod or a full mechanical vape mod.
What wattage do Mech Mods vape at?
At 0.40 ohm, you will take 176 watts in the mouth and at 0.50, you will be around 141 watts. If you are looking for a Mech vaping around 100 watts, then you should aim for a resistance of 0.71 ohm. And beware, we are talking about the stacked.
What wattage should I vape at 0.08 ohm?
A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts). However, always check the product information on your vape device for best results.
Will my vape explode if I drop it in water?
Accidentally dropping your e cigarette or vape mod The battery, container, or both can then fail. This can cause overheating or an explosion.
How do I stop my vape from exploding?
0:082:28Vape Battery Safety: How to Prevent a Vape from Exploding! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're here to lay your fears to rest the number one reason why vape batteries explode is simplyMoreWe're here to lay your fears to rest the number one reason why vape batteries explode is simply improper care by the user. If you take good care of your vape device and your batteries. You will never
Is mechanical mod better?
Mod enthusiasts prefer mech mods because the vapor production is higher than a regulated mod. In other words, without anything else to power, more of the electrical power of the battery is free to go to the atomizer.
Do mechanical mods have safety features?
With mechanical mods, there are rarely any safety features. This sounds scary, but if you do your research and keep safety first, then you shouldn’t have anything to worry about. First and foremost, it is important to know how to use Ohm’s law. I always build on a regulated device or an ohm reader.
What is a mechanical mod?
Mechanical Mods or “Mech Mods” are one of the oldest and most simple ways to vape. However, they come with a few caveats for becoming a proficient user….
What is regulated device?
A regulated device will ensure your ohm load is in the safest range, and there are no hard shorts in your atomizer. Also important is the type of batteries to use. You only want to use a high amperage battery, and you need to buy from a trusted source and company.
Why are Kennedy mods so expensive?
I know clones are cheaper. But that could easily come at the cost of your safety. The reason a Kennedy Mod costs so much is the superior crafting and quality parts. They are handmade and tested using calibrated machinery. Saving some cash is not worth the risk of your safety.
What is hybrid tube?
A hybrid tube consists of just a few parts. The tube itself, a switch, and the top threading. Tubes come in all shapes and sizes depending on your atomizer. The most popular sizes range from 22mm to 30mm. Switches can have nearly unlimited configurations.
What is an unregulated mod?
Unregulated mods are in a league of their own. While your standard mech doesn’t have any safety features in place, unregulated mods usually do. Just like a mech, you hit a button and the mod will immediately fire. The difference is there is circuitry built-in.
What is a switch contact?
The contacts are usually copper or silver plated and the contact is usually held in place with magnets or springs. The switch contact makes a connection directly with your battery. The battery is connected to your atomizer’s 510 connection. When the switch is hit, it completes the circuit and fires the mod.
What is a mechanical vape mod?
Using a mechanical mod is perhaps the rawest kind of vaping possible, thanks to its unregulated output. It’s important to remember that a mechanical / unregulated vape device is recommended to only the most experienced users out there. These are users who have an extensive knowledge of battery safety, battery output, Ohm’s law and vaping as a whole.
Can you use a series or parallel vape?
As you can see from the above calculations, using either a Series or Parallel unregulated vape device will greatly change the type of vape you experience. A parallel vape device will allow you to use coils of much lower resistance, this will result in a more powerful vape, boosting vapour production. A series vape device, on the other hand, will require you to use higher resistance coils, but the device will have a much faster ramp-up.
What is parallel vape?
A parallel vape device will allow you to use coils of much lower resistance, this will result in a more powerful vape, boosting vapour production. A series vape device, on the other hand, will require you to use higher resistance coils, but the device will have a much faster ramp-up.
What is a coil building kit?
The same can be said for a coil building kit, which are specially designed vape tools that allow the user to build coils efficiently and effectively, whilst increasing safety. These are essential for any mechanical user.
What is an ohm reader?
An Ohms reader, or Ohmmeter, is an essential piece of kit for anyone who is looking to build their own coils, especially for those who are looking to move to an unregulated device. An Ohmmeter allows you to check the resistance of your coil, detect any possibility of a short circuit, and judges whether your coils are correctly fitted. If you were to skip this vital stage and fire your RDA on your mechanical mod without checking, the results can be deadly.
What is a series circuit device?
A Series Circuit Device will double the Voltage level of batteries. For example, two 3.7V batteries will create 7.4V of power. This must be taken into consideration when calculating safe coil resistance.
Why does my mod battery fail?
There is a danger inherent in every mechanical mod – the battery. Batteries can fail, due to over-tightening the end-caps of the mod or atomizer. They can also over-discharge due to accidentally pressing the firing pin/button for too long, causing the battery to overheat and potentially burst.
What is a mechanical mod?
Sounds simple, right? A basic mechanical mod is a tube of metal, such as stainless steel, aluminum, or brass. Along with the tube, there’s a firing pin that allows for the current in the battery to reach the attached atomizer/cartomizer/clearomizer – causing the coil (s) to heat up and vaporize the juice.
What are the drawbacks of mechanical mods?
Lack of safety is the biggest drawback of mechanical mods. The features of a regulated mod don’t just exist for your convenience and enjoyment; those features also exist to keep you safe. A regulated mod can detect a condition – such as a short circuit – that would make vaping unsafe. If you’re using a regulated mod – and your atomizer coil has a short circuit – the mod will display a message such as “check atomizer” and refuse to fire. A mechanical mod, on the other hand, can’t detect any problems. If you press the button, you’ll complete a circuit. If your atomizer coil has a short, extreme battery stress will result. In the event of a short circuit, a lithium-ion battery can overheat, vent hot gases and even potentially catch fire. You should not use a mechanical mod unless you’re prepared to accept that risk and take responsibility for your own safety.
Is it cheaper to buy a mechanical mod?
Most mechanical mods, however, are very inexpensive to buy. When you buy a mechanical mod, after all, you’re not buying a color display, a circuit board or a microprocessor. A mechanical mod gives you a lot of power at a very low price.
What is mechanical mod?
A mechanical mod is an e-cigarette with no internal electronics. While most modern vaping devices include things such as integrated circuits, OLED displays and wattage controls, a mechanical mod is nothing but a battery compartment, atomizer threading and a switch. Why, you might ask, would you want to buy an e-cigarette that’s just a battery tube and a button? As it turns out, mechanical mods have plenty of features that make them worth buying – but they aren’t for everyone. This list of the pros and cons of mechanical mods will help you decide whether a mech mod is the right vaping device for you.
How many watts does a mod use?
Although a mechanical mod fires instantly when you press the button, it has a drawback in that it can’t safely reach the maximum power levels that a modern regulated mod can reach. It’s common to find single-battery regulated mods that can operate at up to 80 watts. A regulated mod also includes a boost circuit that allows it to operate at higher than 4.2 volts. A single-battery mechanical mod, on the other hand, operates at no more than 4.2 volts. That’s the voltage of a fully charged battery – and the voltage drops rapidly as you use the mod. Dual-battery mechanical mods also pale in comparison to dual-battery regulated mods – which can reach power levels of 225 watts and higher. Today, it’s common to find sub-ohm tanks designed to operate at above 100 watts. Few mechanical mods can handle that load safely.
What is mechanical mod?
Mechanical mods are, essentially, a bit of a paradox. In essence, they’re the most basic type of vaping device on the market. Largely comprising of just a container with a battery inside, the fanciest the technology gets is the circuit connecting the base, the atomiser and the connector, completed when the firing button is pressed.
Why is maintenance important?
Maintenance is equally as important as learning how to build or setup properly. Regularly cleaning your connectors, drippers, mods and tanks may be arduous and time-consuming, but it’ll save you money and ensure your safety in the long run.
Is it safe to use a mech mod?
If used correctly, mech mods are rather safe. However, because there is no onboard system, it is up to you to make sure everything is working correctly. Use the right batteries with your device, and keep them charged – but not overcharged.
How to maintain a mechanical mod?
What Should I Know About Mechanical Mod Safety and Maintenance? 1 Use the right batteries with your device, and keep them charged – but not overcharged. You can do this by checking the voltage level with a multimeter, charging up to 4.2 and then recharging once it drops to 3.3. 2 Perform frequent checks for short circuits, and ensure that whatever atomizer you pair with your mod is properly compatible. 3 Make sure you have allowed for good airflow so that pressure can be sufficiently released. 4 Prevent misfires by storing your mod properly, especially if it doesn’t have a locking firing mechanism.
How does a mech mod work?
Mech mods use a simple process to produce vapor. The battery is in contact with both the top and bottom caps of the mod, and when it is activated, current flows into the heating coil. This circuit is all that is needed to power the mod and make it possible for you to vape.
What is a mech mod?
Because it is much more basic than many standard vape devices, a mech mod contains only a small handful of parts. The housing is the portion that contains all of the parts and can come in many different forms.
What is semi mechanical mod?
These are usually to select the voltage output. These are not controlled by a chip they are simply mechanical components which add a resistance into the circuit to lower the output.
What is a Mech mod?
A typical Mech mod is usually a tube or box style – there are wires or metal plates between the battery contacts, the switch and the 510 connector. There are no circuit boards just physical connections.
What is semi regulated mod?
Semi regulated mods are a kind of intermediate mod – for someone who is perhaps used to regulated or new to mechanical. They can still provide a powerful hit but with some added features.
What is hybrid mod?
A Hybrid mod has even less wiring than a standard mech mod. Basically the top of the battery connects directly to the 510 connection pin from the atomiser when the fire button is pressed. Internal wires / plates or the mod body and outside of the 510 connector complete the circuit with the opposite pole on the battery.
How to fix a mechanical mod that isn't firing?
When your mechanical mod isn’t firing, the first and perhaps most obvious troubleshooting step is to try a different battery. The batteries used in most mechanical mods are considered “dead” when they drop to about 3.2 volts. A battery discharged below this level may not be able to fire an atomizer coil and may, in fact, be unsafe to use. Swap out your current battery for one that you know to be fully charged and see if the mechanical mod fires. Because a mechanical mod has no display to supply information about the battery, many mech mod owners find it very helpful to use a battery voltage checker periodically.
Why won't my mechanical mod fire?
A mechanical mod won’t fire if the atomizer has a problem. Some of the problems that might occur with an atomizer include damage to the coil or, if the atomizer has never worked with your mechanical mod, a center pin that doesn’t touch the top contact point inside the mod’s threading.
What is mechanical mod?
Mechanical mods are prized by a subset of e-cigarette users for their low cost and simplicity. They’re also ideal for e-smokers who build their own atomizer coils, because they always output the full voltage of the battery to the coil — nothing is lost to wires and chips. The one thing that mechanical mods lack, though, is feedback.
What is a hybrid mod?
An important note about hybrid mods: A hybrid mod is a device with a hole rather than a pin in the top cap. In most mechanical mods, the top cap includes a pin that touches the top of the battery and the bottom of the atomizer.
How to clean a mod?
Clean your mod with a soft cloth and cotton swabs. Some people use a little water or rubbing alcohol — simply follow the best practice for the component that you are cleaning. Be certain, though, that your mod and all of its components are completely dry before attempting to use the device again.
How does a mechanical mod work?
A mechanical mod uses resistance to keep the button away from the bottom of the battery when the device is not in use . Early mechanical mods used springs — and many less expensive mods still use them. However, the preferred method is to use two magnets inside the button.
What is a short circuit?
A short circuit is any situation in which electrical current flows along an unintended path. A short circuit could result in a variety of negative consequences such as an electrical shock or battery explosion. Of course, a short could also cause a mechanical mod not to fire.
Explaining Mechanical Mods: The Basics
Safety First!
Clones and Safety
History
Anatomy, Types, and Styles
Series and Parallel Battery Configurations
Unregulated Mods
- Unregulated mods are in a league of their own. While your standard mech doesn’t have any safety features in place, unregulated mods usually do. Just like a mech, you hit a button and the mod will immediately fire. The difference is there is circuitry built-in. Usually, there is a fuse or a capacitor connected to the battery and this makes for safet...
Who Are Mechanical Mods for?