- Open the casing of your vape pen to access the batteries. ...
- Place the batteries in a quality external charger. Plug the charger’s power cord into the wall. ...
- Charge your batteries for at minimum of 3 hours. This is the average amount of time it takes for most removable vape batteries to reach a full charge.
- Remove the batteries from the charger when they reach full capacity. ...
- Reload the batteries into your vape pen. Open the battery cover on the casing once again and slide or press the batteries into place.
- Check the charge level of your batteries periodically. If you’re not sure whether or not your batteries are in need of a charge, simply pop them out, stick them ...
- Replace your batteries when their performance begins to suffer. The majority of 18650 batteries are built to last for 300-500 cycles, or around 1-2 years of regular charging for ...
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
What is the best battery for a beginner vape pen?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
How do you charge an integrated vape pen battery?
Charging an Integrated Battery See if your vape pen has an integrated or removable battery. Hook your vape pen up to its charger using the included USB cable. Wait for the battery to finish charging completely. Watch for the red light that tells you it's time to recharge your battery.
What is the battery size of the vision vape pen?
The vision vape pen is a 1300mAh battery with different voltage levels and 510 threaded connections. This vape pen is powered by an internal cell of 1300mAh with a regulatory power system that allows you to set your device to the desired voltage from 3.3v to 4.8v.
How do I know my vision spinner is charging?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you use a vision spinner battery?
0:002:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do you charge a rechargeable vape pen?
To charge a vape pen, start by plugging the AC adapter into a nearby electrical outlet and inserting the large end of the USB cable into the adapter and connecting the smaller end to the port in your pen. Once you begin charging your pen, wait until it's finished to unplug it, which could take 1 to 4 hours.
How do you turn on the vision spinner pen?
2:528:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt came with the battery is also clean on the end and to do that same type of thing just take a flowMoreIt came with the battery is also clean on the end and to do that same type of thing just take a flow piece of paper towel. Put down the threads here. And just run it around on the inside.
How do you charge a vape battery?
Part One: How to Charge a Vape Battery With a 510 ThreadUnscrew the cartridge from the battery and connect the battery to the USB cable. ... Plug the AC adapter into a wall outlet, and put the flat rectangular end of the USB cable into the AC adapter. ... Allow the battery to fully charge.More items...•
What is a vision spinner?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Why is my pen charger blinking red and green?
If the pen lights up green and the charger lights up red, your pen is dead! Once your pen reaches full charge, the charger light will turn green and the pen light will shut off, notifying you that your pen is good to go with full battery life.
Can I charge my vape pen with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
Why is my vape flashing and not working?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
How do I charge my EVOD twist without charger?
4:105:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
Who makes the vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
Russ1981 Full Member
This is probably a stupid question... I got a Spinner from a friend for my birthday after he asked what I wanted, and he bought me the 1300 mAh battery and nothing else. I figured that since it's basically an eGo battery the plug in charger that I got with my passthrough would work just fine, but there is no place to plug it into the battery.
Russ1981 Full Member
Great, thanks. I actually did some searching and found a combo with a wall charger attachment on Empire Mods and it's cheaper that way, I'll have to wait until it comes back in stock though. Where does it plug in though? You can't remove the dial on the bottom, and the eGo passthrough had a thread cover to plug in the charger so I'm confused.
struckus Super Member Verified Member ECF Veteran
you charge it by the atty screw 510 threads..it screws on like you would screw on a carto or atty etc..
kthedjsgirl Full Member
Still vaping on same spinner since I got it. Question is... it seems weak on the voltage I was using & now upping to 4.8. Can I charge it now or wait till it is fully dead? Will the light flash when it needs charging?
struckus Super Member Verified Member ECF Veteran
you can top it off at any time..li-ions prefer to be topped up frequently rather than being discharged fully..
reffjak Full Member Verified Member
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
struckus Super Member Verified Member ECF Veteran
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
What voltage is the Vision Spinner?
The vision spinner has spinning dials at the end of the battery with digits displaying the voltage range. You get to pick between 3.3 and 4.8 and the in-between figures that allow for minor adjustments
How many mAh does a vison pen have?
The mAh ratings are crucial because they display the battery's stored energy capacity. The vison pens come with mAh power between 650 mAh and 1300 mAh, providing for other mAh variations in between
How many mAh does an Ego battery have?
Considering that the vision capacity is at a maximum of 1300 mAh, different from the usual 1100mAh in most eGo batteries. The battery can last longer than the other brands, with several options you can select from.
Why is a pen safety feature important?
Safety features are necessary for any pen, and this is to protect it from damages that arise from short circuits and related faults. The vision system turns off your battery immediately. It senses a short circuit. And once the error is corrected, it turns back on.
Do vision spinners need batteries?
The vision spinners' batteries require a lot of care and maintenance. Worn out and damaged batteries run out quickly and take time to recharge. Vision is equipped with a led indicator that monitors how you use your battery and acts accordingly when you get closer to the set minimum level.
Do the buttons match our expectations?
Though the excellent performance of the vision than the other brands. The buttons do not match our expectations. At times they will cause you problems as you use it, making it challenging.
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
How to charge a vape pen?
If your vape pen runs on removable batteries, you’ll need to take them out before you can charge them. Look for the removable battery cover on the bottom or side of your pen. Once you find it, press the thumb latch or tab to pull it open.
How to hook up a vape pen to a charger?
First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
What does it mean when your vape pen is red?
When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.”. Hold off on using your vape pen again until it’s been charged. Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
What type of battery is used to power a vape pen?
This usually involves fitting the cartridge into a separate device that houses the batteries. The most common type of removable battery used to power vape pens are 18650s. These look similar to standard AA batteries, only bigger. Tip: Not all 18650 batteries are designed to be used in vape devices.
How long does it take to charge a vape pen?
Once you begin charging your pen, wait until it’s finished to unplug it, which could take 1 to 4 hours.
What kind of batteries do vape pens use?
The majority of vape pens use “510-Thread” batteries, which have a universal design that makes them compatible with different cartridges. Your vape pen’s battery may feature colors, text, or other markings distinguishing it from the cartridge. ...
Is vaping a good alternative to smoking cigarettes?
In the past few years, vaping has become increasingly popular as an alternative to smoking cigarettes. Almost all vape pens and e-cigarettes are battery-powered (the batteries heat the liquid, turning it into a vapor), which means they need to be adequately charged in order to work properly.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
How long does it take for an Ego to charge?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours. Once fully charged remove the battery from the eGo charging Lead.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
