The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
What is vape4ever vision spinner 2 battery?
Vision Spinner 2 Battery | Vape4Ever Vision Spinner 2 Battery is the product of brand Vision, it's one of the best vapor products with the option of Black Battery:1pcs, etc. Customer Service: [email protected]
What Charger do I need to charge the spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
How do you charge an integrated vape pen battery?
Charging an Integrated Battery See if your vape pen has an integrated or removable battery. Hook your vape pen up to its charger using the included USB cable. Wait for the battery to finish charging completely. Watch for the red light that tells you it's time to recharge your battery.
How do I know when my vision spinner 2 is charged?
The eGo Charging Lead features an LED light which will glow red when charging. When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you charge a rechargeable vape?
First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen. Depending on the model you're using, you may need to unscrew the battery from the cartridge in order to access the charging port.
How do I know if my vape charger is working?
The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
How do you charge a vape device?
How to Charge Your Vape: A Step-by-Step GuideStep 2: Wait for the Indicator Light to Show Full Charge. ... Step 3: Remove Your Vape from the Charger. ... Step 1: Open Your Vape and Remove the Battery. ... Step 2: Place Your Battery or Batteries in Your External Charger. ... Step 3: Wait for the Batteries to Reach Full Charge.More items...
Can you charge vape with phone charger?
DON'T: Use a phone charger Your box mod has to power a small coil. One of these things needs more electricity than the others, so using a phone charger to power your ecigarette battery pumps in more electricity than the battery can handle. Don't do it.
How do you use a dead disposable vape?
0:483:11How to Recharge a Dead Disposable! (Fast and easy, for any brand!)YouTubeStart of suggested clipEnd of suggested clipSo you take the negative end and put it on the negative end of the battery you can tell because thisMoreSo you take the negative end and put it on the negative end of the battery you can tell because this wire is black black is always negative. And this one is just black.
What to do if vape is not charging?
Check if the charger charges up another battery that needs charging. If you're sure you have two good batteries and they won't charge, but they are depleted enough to take more charge, the charger must be the problem or other equipment connected to the charger, ie the mains wall plug or an adapter.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my vape not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Should I turn my vape off when charging?
The power from your battery will be lost if your vaporizer is on. You can save a lot of battery by turning it off.
How do you charge a vape pod?
These devices can be recharged by plugging them into any electrical socket. Your device will normally come with a USB cable, so all you have to do is connect it and plug it in to charge it. If the smartphone is charging, the indicator light should illuminate.
What kind of charger is used for Vapes?
USB chargers are the cheapest and most commonly used chargers for e-cigs. This type of charger has a USB hookup on one end, and a connector for the e-cig battery on the other end. USB chargers are generally small and easy to use.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
How long does it take for an Ego to charge?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours. Once fully charged remove the battery from the eGo charging Lead.
Can you charge a battery overnight?
Do not charge batteries overnight. Batteries contain electronic circuits and like any electronic device they can be damaged if dropped, mistreated or immersed in water (or other liquids). Not all USB ports are the same. Only use USB ports that are directly connected to your computer and not extension USB ports.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
How to hook up a vape pen to a charger?
First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
How to charge a vape pen?
If your vape pen runs on removable batteries, you’ll need to take them out before you can charge them. Look for the removable battery cover on the bottom or side of your pen. Once you find it, press the thumb latch or tab to pull it open.
What does it mean when your vape pen is red?
When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.”. Hold off on using your vape pen again until it’s been charged. Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
What type of battery is used to power a vape pen?
This usually involves fitting the cartridge into a separate device that houses the batteries. The most common type of removable battery used to power vape pens are 18650s. These look similar to standard AA batteries, only bigger. Tip: Not all 18650 batteries are designed to be used in vape devices.
How long does it take to charge a vape pen?
Once you begin charging your pen, wait until it’s finished to unplug it, which could take 1 to 4 hours.
What kind of batteries do vape pens use?
The majority of vape pens use “510-Thread” batteries, which have a universal design that makes them compatible with different cartridges. Your vape pen’s battery may feature colors, text, or other markings distinguishing it from the cartridge. ...
Is vaping a good alternative to smoking cigarettes?
In the past few years, vaping has become increasingly popular as an alternative to smoking cigarettes. Almost all vape pens and e-cigarettes are battery-powered (the batteries heat the liquid, turning it into a vapor), which means they need to be adequately charged in order to work properly.
Spooky28 Super Member Verified Member ECF Veteran
You got me but I'm happy to commiserate. I just replaced my vision spinner 2 with a MVP v2 because the thing #1 would rarely charge all the way white regardless of the tips I learned here and #2 no matter how much of a charge it was going to orange in 2-4 hours of moderate use maybe once an hour.
Novena Senior Member Verified Member ECF Veteran
How tightly are you screwing it onto the charger? I've found with mine that it's better to not tighten it all the way. I'd also recommend plugging it into a wall adapter rather than your computer - you'll get a better overall charge.
Spooky28 Super Member Verified Member ECF Veteran
The only time I DID get a full charge was using my computer as opposed to wall adapter. Older home who knows what's going on with my house current.
nwohiopma Senior Member Verified Member ECF Veteran
Genuine Spinner 2's are exactly 4-7/8" long. Fakes are slightly shorter.
logic vs emotion Full Member
King, you don't have to turn it off to charge it. So with it on, screw it into the charger, tap the power button once really quickly. When you turn it off, I don't think the pressing the button once with activate the charging. Try it again as I suggested.
xtwosm0kesx Ultra Member Verified Member ECF Veteran
xtwos, I am not sure exactly what firing a tank is can you explain it? And logic when I press it once really fast while its on and connected to the charger it does nothing but do 1 blue blink as if I did a very quick hit, basically like if I took a 0.01 second drag.
SMOK STICK V8 BABY KIT
Stick V8 Baby kit consists of 2000mAh Stick V8 2000 battery and TFV8 Baby tank. Simple mechanical pen style matches with baby beast—TFV8 Baby tank, the newest pen kit brings you experience the purest taste.
The Kind Pen Mist 510 Thread Oil Vaporizer
The Kind Pen Mist 510 Thread Oil Vaporizer with LED and ceramic refillable cartridge, portable and discreet, is powered by 500mAh battery with 3 voltage levels.
SMOK NOVO Kit
Novo Vape Pod System Starter Kit is a fabulous and gorgeous vape device.It has built-in 450mAh battery and can contain 2ml e-liquid. You can drip your favorite oil into them.Innovation keeps changing the vaping experience!
Evod Twist 2 Battery
Evod Twist 2 Battery Personalized button design,flash colorful variable voltage button. Bottom scale indicates the position of voltage level. 3.2v to 4.8v smooth turning voltage adjustment dial by evod twist bottom and button.
Loosie Max 510 Thread Battery
Loosie Max 510 Thread Battery 350mAh with high-grade battery cell and LED lights, one-button control, features 4 level temperatures 2.7V, 3.3V, 3.7V, 4.1V.
EVOD Vape Pen
EVOD Vape Pen Starter Kit Very convenient for injecting and filter e-liquid. No tar and other cancer causing substances. No second-hand smoke, environmental protection.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
How long does it take for Vision Spinner to charge?
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster.
How to tell how much battery is left on Vision Spinner?
The LED battery indicator lets you know how much battery is left on your Vision Spinner Vape Pen. The light is white when it has over 60% charge.
What is Vision Spinner?
The new Vision Spinner is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look, equipped with a matching Kanger Clearomizer.
How long does it take for an atomizer to lock?
Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again. Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
