What is the best wattage for a vape?
While it completely depends on the system, a lower wattage of 10W can usually get you a decent cool vape, while 50-75W is the ideal wattage for warmer vaping. If you want the best of both worlds, maintain an average wattage of about 40W.
How do I calculate the resistance of a vape cartridge?
Visit a Ohm's Law calculator such as Ohm's Law Calculator - A Free Vaping Calculator - Up Tech and enter 4.2V and then enter the resistance of your cartridge. (Nearly any box mod should be able to display resistance) Most pre-fills are 1.6-2.2Ω.
How many ohms is a vape coil resistance?
Coil resistance varies from one vaping device to the next, usually falling between 0.1 and 3.0 ohms. Devices below one ohm are referred to as sub-ohms. But note that all sub-ohms are not equal.
Is 7-15w enough for vaping?
When you juxtapose that number against many of the devices on the market which average around 200W, you can admit 7-15W is a bit on the lower side. What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage.
What wattage should I vape at 0.75 ohm?
between 14.5 and 115 wattsThe 0.75ohm atomizer head has the lowest vapour production, tightest airflow and should be recommended to customers looking to reduce their vapour production. Working power range of between 14.5 and 115 watts.
How do I know what wattage to vape at?
Your preferred vaping wattage can depend on how well you know your vape device, how comfortable you are with vaping altogether, as well as the kind of effect you are looking to create. If you look at most cig-a-like devices designed to closely mimic smoking, for instance, you find they are pre-set at around 7-15 watts.
What wattage should I vape at ohm?
These devices burn at higher temperatures and are intended for use with high VG liquids, producing thicker clouds and releasing more flavour from the e-liquid. A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts).
What is the best wattage for a 0.4 ohm coil?
25W0.4 ohm RPM Mesh Coils feature a honeycombed mesh design and are best for flavour-seeking vapers. Recommended Wattage: 25W.
How many watts do I need for 0.6 ohms?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts.
What wattage should I vape 0.15 ohm?
60-90 wattsIn contrast, the 0.15ohm dual mesh coils have a best recommended wattage of 60-90 watts. Both atomisers offer huge clouds and flavour production. Since these coils are sub ohm / direct to lung (DTL) in vaping style, they are recommended for use with higher VG e liquids.
What voltage should I vape at 0.2 ohm?
0.4 ohms - 40 watts to 80 watts. 0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
How many watts do I need for a .23 ohm coil?
0.23ohm | Recommended Wattage: 20-45W.
What is the best wattage for a 0.3 ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
Is 0.4 or 0.6 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What's the difference between 0.2 and 0.4 ohm coil?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
What is the best wattage for a 0.5 ohm coil?
Always follow the manufacturer's guidelines for the appropriate wattage range for a coil. You will usually find the range on the packaging, in the product description, or in the technical specs. For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts.
What is variable wattage vape?
For selective vapers, variable-wattage vapes are the right way to follow. They allow them to tailor their vaping experience by fine-tuning their devices to their wattage of preference and depending on the kind of vape flavor they are using.
Why is it important to have a good throat hit when vaping?
High wattage generates more heat which in turn makes them feel comfortable them . A great throat hit is the most important thing for vaping. A lot of this comes down to individual preference. Some people draw huge hits, slurp down nicotine and create enormous vapor clouds.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
What does wattage mean in vaping?
First, let’s start by understanding what wattage is. Wattage is simply the measure of the amount of power an electronic cigarette uses. Adjusting your vape wattage means altering the temperature produced by the atomiser/coil as the juice is heated. Adjusting your temperature settings allows you to fine-tune your vape to your desired tastes ...
What is the ideal voltage for a 2 ohm coil?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.
Kanthal Wire Resistance Chart
This chart will show you the approximate resistance of different sizes of kanthal wire as well as different lengths.
Amp Discharge Rate Chart
This chart provided useful information about what battery discharge rate you might want/need.
Kanthal Wire Chart
I also have these charts on 2 PDF files. One has 3 charts on one page for printing, the second has a single chart on each page.
How many watts does a vape cartridge need?
It’s not about watts, it’s about volts. Yes, if your standard vape cartridge has about 1.2 ohms of resistance, it will take about 7 watts to produce 3.7 volts. But that’s really what you want to focus on, is making sure you have the correct 3.7 volts, instead of just going by wattage because the resistance between cartridges may change.
Where is the liquid going in a cartridge?
If you look at the base of your cartridge, there are one or two little holes on the inside of the cartridge at the base of the tube that the vapor comes out. That’s where the liquid goes in. If the liquid is too thick, it won’t be able to go through those holes and then you will burn it. As. Continue Reading.
What to look for when making a cartridge?
There are a couple of things to look for to make this determination. The cartridge itself and the thickness of the liquid. The liquid usually comes at the proper thickness for a cartridge; however, some people make their own and that’s where the thickness may change. You want a liquid that is relatively thin.
Can you take a weed pen on a plane?
So let’s allow the proposition that you are flying from a legal state (California, Colorado, etc.) to a state like New York or Florida with a weed vape pen. Never put the pen in your checked luggage because electronic cigarettes are banned from checked luggage regardless of whether they are for nicotine or weed.
ConnorH2 New Member
Hi there, I'm new to vaping. I bought myself a Vaporesso Tarot Nano Kit with some 'Traditional ECU Coils ' with a sticker that says 35-40 watts. Do I need to run it at this voltage? can I go higher? the coils have a ohm of 0.5.
Belhade Ultra Member Verified Member ECF Veteran
That's an estimated power range that's the coils are supposed to perform at. Which sounds about right for that resistance; I fire single .6Ω coils at 25-30w, and dual coils reading .6Ω at 30-40w. Best to start at the lower end of the range, see how it works then slowly increase as necessary.
bombastinator ECF Guru Verified Member ECF Veteran
That's an estimated power range that's the coils are supposed to perform at. Which sounds about right for that resistance; I fire single .6Ω coils at 25-30w, and dual coils reading .6Ω at 30-40w. Best to start at the lower end of the range, see how it works then slowly increase as necessary.
eastcoaster91 Senior Member
I just bought the Tarot Mini Kit and I'm using the .5ohm 316l coil rated at 25-35watts and I'm running it at 35watts. I've taken it as high as 45watts and it seems like it can't keep up with me chain vaping .
ConnorH2 New Member
thanks a lot guys, I've been running it on 35. I'll keep it below 40 though
supertrunker Living sarcasm Verified Member ECF Veteran
Hi there, I'm new to vaping. I bought myself a Vaporesso Tarot Nano Kit with some 'Traditional ECU Coils' with a sticker that says 35-40 watts. Do I need to run it at this voltage? can I go higher? the coils have a ohm of 0.5.
Eskie ECF Guru Verified Member ECF Veteran
Just prime the coil well, then break it in. Start with low wattage and increase a few watts at a time until your sweet spot. It will likely be under the "recommended, rated" wattage or at the low end of it.
What happens if a box mod doesn't do voltage?
It will deliver unregulated battery power for the closest experience to a mech mod possible. If your box mod doesn't do any of these things, then you will need to calculate the maximum safe wattage.
What wires can be used for temperature control?
Titanium, Ni200 (nickel) and Stainless Steel are the only wires that can be used (as of now) with Temperature Control. Kanthal, Stainless Steel and Nichrome are the only wires (as of now) that can be used in wattage/variable wattage mode.