Continue adjusting and testing the pen. Remove the paperclip and turn the pen on. If it still doesn’t work, use the paperclip again. Lift the coil a little, then push it down gently to center it over the bottom screw.
Full Answer
How to turn on a vape pen?
Jan 14, 2017 · Facebook Page: https://www.facebook.com/sourcevapetech/Website: http://sourcevapetech.blogspot.com/
How to set up a vape?
Look at the mod and see if the center pin is adjustable, if it is turn it to lengthen it some until contact is made. If not then you will need to try another atomizer. 1.3K views Related Answer Oliver Tallendier , Former IT guy. (1996-present) Answered 4 years ago · Author has 2.8K answers and 3.4M answer views
How to replace a vape pen coil?
Jan 14, 2014 · Have you tried to lift the center pin on the MVP? he can get stuck down too far. You can take a very small screwdriver or dental tool and work around the center connection to lift it up. I have an Innokin 3.0 and it does that. I have had to do that a few times. If you try to tap the pos post down do not use the allen wrench to do it.
How to replace a vape pen heating chamber?
Mar 29, 2014 · I pushed the center pin out with a drill bit then slightly drilled the derlin out just a tiny bit then reinserted the pin and now it adjust easily without having to really screw down you atty hard When I wanna make the center pin go back up I Unscrew the connection screw right to the limit then screw the top cap bacK on with a battery in and it re adjusts to original postion
How do you adjust the connection plate on a vape pen?
Where is the 510 pin on a vape?
How do you change the PIN on a vape battery?
How do you fix a disposable vape that won't hit?
How do I fix my pin 510?
What happens if you over tighten a cart?
Why is my cart not hitting on my battery?
Why isn't any smoke coming out of my vape?
Why does my battery blink 3 times?
Why does my disposable keep hitting?
What does it mean when a disposable vape blinks blue?
How do you get more hits out of a disposable after it dies?
DasBluCig Ultra Member Verified Member ECF Veteran
I have a pheonix v5 and the issue I'm having is getting it to fire on my MVP2. I have read on here that sometimes the center pin on the RDA has to be pushed down from the top. Its not a great RDA and came with a small allen wrench.
bluecat Vaping Master ECF Veteran
I have an IGO W I had to do that to. Gentle tapping did not work. I finally chalked it up to a loss (wouldn't work anyway) So gave it a nice thwack with a tack hammer. Needless to say that pin moved quite a bit. Then I tapped it back and tapped and tapped until I got it to where it needed to be. It needs a good thwack at least the IGO W I had did.
crxess Grumpy Ole Man Verified Member ECF Veteran
If you have the RDA sitting on an anything, little will be accomplished. The center pin needs to be free of obstruction to move.
rastapete69 Senior Member Verified Member ECF Veteran
But if all other toppers work wouldn't that one topper be the problem not the MVP?
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
What happens if you set your coil incorrectly?
If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.
Where do you fill a pod?
First off you will need to locate the filling cavity on your pod. Most pods are either filled from the top or from the side, but this will be clearly indicated on the packaging or in the manual.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to loosen up cannabis oil?
If you don’t have a hairdryer on hand, there are other ways to loosen up your cannabis oil. Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous.
How to get rid of a settled cannabis cart?
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds. Then reconnect the cart and take a pull. If your airflow is still obstructed, repeat the process again.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What kind of cartridges do oil vapes use?
Most of the oil vape batteries we sell are made for 510-threaded cartridges. Be sure to check what threading your battery has, and purchase cartridges that fit your battery.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
How to fix a vape pen that won't work?
Replace the heating element if the pen still doesn’t work. Your first option is taking the pen to a professional vape shop. Sometimes an experienced professional can find a way to repair it. If not, either get a replacement pen or purchase a new heating coil. Having a professional repair an old pen is often cheaper than replacing parts, and getting a new heating element can spare you from the cost of buying a whole new pen.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to find battery in a pen?
Take apart the pen to look inside the heating chamber. Unscrew the mouthpiece from the pen again. Continue removing pieces until you are able to see the wire coil inside the heating chamber. It will be right above the lowest section, which contains the battery.
How to replace heating element in pen?
Usually the replacement is a whole new heating element, so all you have to do is unscrew the old one and affix the new one by hand.
How to clean a pen coil?
Dab isopropyl alcohol onto the coil to remove wax and oil. Pick up a bottle of isopropyl alcohol from a general store or drugstore. Moisten a cotton swab, but don’t soak it. You don’t want the isopropyl alcohol to drip into rest of the pen. Using the cotton swab, wipe down the coil and chamber if they appear blackened or covered in debris.
What to do if your pen won't work?
Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.
