Inputs
| Wire Type | ||
| Wire Profile | Round ... | Round ... |
| Build Deck Configuration | ||
| AWG | 38 ... | (0.2540 mm) |
| Wire Diameter | mm | Resistance / m |
What size coil do I need for my vape?
With a 1.2 ohm coil you’ll probably be looking at around 15W – 25W for a satisfying vape but it really depends on personal preference. If you’d like any tips on building your coils then check out our guide on coil building.
What are vape coils?
WHAT ARE COILS? Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour.
How often should you change your vape coils?
As a general rule, most manufacturers recommend changing the coil after a week of use. If you solely use a vape device this will be seven days, however if you don’t vape that often, you may find that changing your coils every two weeks is sufficient enough.
Can You Make your own vape coil heads?
Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice.
Can I use 1 coil in my vape?
A single coil configuration is ideal for vapers who: Want to save: for instance, when consuming e-juice with a single coil RDA build, your device battery will last about 15% to 30% more as low wattage settings are recommended for this device.
How many puffs does a vape coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
What coils do I need for my vape?
WHAT DO I NEED TO BUILD A VAPE COIL?An Ohmmeter.An RDA or RTA.Resistance Wire: Kanthal, stainless steel or NiChrome are popular options but make sure you choose the right one for the mode you vape in. ... 2mm screwdriver (this is included with most RDAs) or 2mm drill bit.More items...•
How many wraps should my coil be?
How many coil wraps do I need? This depends completely on what type of coil you're building, your target resistance and even how much flavor you want from your coil. We'd usually suggest sticking to around 6 wraps as this will give you a good cross sectional surface area with decent flavor.
How many cigarettes is 600 puffs?
48 cigarettesAn Elf Bar should last you about 600 puffs, which roughly equals 48 cigarettes. This is more than enough for a social smoker, and the Elf Bar is also able to allow you to finish your vape without the need for charging.
How often should you vape a day?
There is no one answer to the question of how often you should vape, as it depends on a variety of factors. Some people may find that they enjoy vaping every day, while others may only want to vape occasionally. The most important thing is to figure out what works best for you and stick to it.
How long will a coil last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What wattage should I be vaping at?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
How can I make my vape coil last longer?
5 Tips to Make Your Coils Last LongerPRIIME YOUR COILS. When you first install a new coil, it's important to completely soak the wick with e-liquid. ... USE HIGH-QUALITY E-LIQUIDS. ... REGULARLY CLEAN YOUR COILS. ... USE E-LIQUIDS WITH A HIGHER PG CONTENT. ... KEEP YOUR TANK FILLED.
How do you count loops in a coil vape?
Double check your number of wraps by counting them on the side of the coil that is opposite of the leads. Once you are sure your coils has 8 wraps you can hold one lead firmly with your fingers and pull on the other lead with your tweezers or pliers then repeat with the other lead.
What is the best wattage for a 0.4 Ohm coil?
For example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to prime a vape coil?
To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal. By priming a coil it allows e-liquid to soak into the wick faster, which means you don’t have to wait as long to start vaping.
What does it mean when your vape smells like it's burning?
The smell of burnt metal or fibre coming from your tank will mean that you are either vaping at too high a wattage or need to change the coil altogether. Reduce the wattage immediately and then check to see if the smell persists. If it does then replace your coil.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is a sub ohm coil?
Sub ohm coils, on the other hand, have been designed for creating large amounts of vapour. They get their name from their resistance, a sub ohm coil will always have a resistance less than 1.0 Ohm. This low resistance means they’ll accept a greater level of power and heat more e-liquid at a faster rate, this is why they produce larger amounts of vapour. They are also called DTL (Direct To Lung) coils because they allow you to adopt a direct to lung vaping style, wherein you inhale vapour straight into your lungs without holding it in your mouth first.
What do you need to use a sub ohm coil?
In order to use a sub ohm coil, you will need to have a vape kit or device that can produce larger amounts of power. These will normally be more expensive than a standard mouth to lung kit and have been designed for advanced vapers.
How does a vape coil work?
The two elements of the coil work in combination, with the wick supplying a steady source of e-liquid for the wire to heat into vapour.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
What does it mean when a vape exhales?
This does mean that they will use much more e-liquid and their battery will drain quicker.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What is the outer casing of an atomizer?
It is the outer casing which attaches directly to the base of the tank and provides electrical contact to the coil.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is coil jig?
Coil jigs are tools that help you wrap coils consistently by guiding the wire while it is getting wrapped on a rod. They are very useful tools, and they will help you make perfect coils every time with minimal effort.
What is a micro coil?
Micro: a micro coil build is a coil that has an inner diameter of up to 2 mm.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
Tools Needed
A few basic tools and supplies is all you need to build or make a coil, we have compiled a list for you. There can be a lot of variation in tools used, this is what works for us, but if you get started you may find other items that help the process and that is fine. List of tools:
Build Mat for a Clean Work Space
Are you ready to get to work? Again, the best way to describe the actual process is with a visual aid, and the best way to do that is with a video! Please check out this coil building video here: https://youtu.be/BBpwZoxG3d0
What is the best starting range for a vaporizer?
Personally, we think a great starting range would be something like 0.5ohms to 1ohm. Anything on that scale should give you great flavor and vapor! As long as you know how to wick properlyof course…
What is the typical coil build resistance?
A typical coil build resistance usually ranges from around 0.1ohms to 2.5ohms.
Why are coils so popular?
These coils have gained popularity, due to the improved airflow and flavor as more of the coil surface area is in contact with the wick.
What type of wire is used for variable wattage?
Kanthal A1 and Nichrome N80 are the two types of wire used for Variable Wattage mode only. Stainless Steel (316) can be used in either Variable Wattage or Temperature Control (TC) mode.
What is macro coil?
The macro coil is any type of coil with an inner diameter larger than 2mm.
How to wrap a coil?
To wrap a coil, you’ll need either a drill bit, a screwdriver or (ideally!) a coil jig to wrap the wire around. The size of whatever you use dictates the inner coil diameter.
What do you need to make a nail clipper?
In terms of the basics, you’ll need a length of resistance wire, a screwdriver ( or drill bit!) and a pair of cutters. Quick tip though; a good pair of clean nail clippers work just as well!
How long do vape coils last?
How you vape and how well you treat your coils can significantly extend their lifespan. Generally, new coils last between one to two weeks, but that can be extended if you properly break-in new coils when you get them and practice good care and maintenance procedures during and between usages.
How to attach coils to a vaporizer?
Attach coils to vaporizer: Put your coils in place and press your firing button until they heat up completely. Just like building your coils for the first time, make sure that they heat evenly across all of the wraps. Look for signs that there is anything heating unevenly and make sure it is clean and dry.
How to saturate a vape wick?
This is where the wick is supposed to make contact with your vape juice. Take your bottle of e-liquid and carefully add a drop of vape juice in each of these holes to saturate the wick. Add another drop inside the head to saturate the wick ’s center.
Why does my vape get burnt?
Instead, because there’s no juice to heat, the coils heat the wicking material which will cause the material to be used up faster and produce a less than desirable vaping experience. You can avoid this by:
Why do coils need to cool down?
Your coil needs to cool down and absorb more e-liquid before it is ready to produce more vapor. If you are firing too quickly, you could be leaving your coils dry between hits without even realizing it. Don’t run your tank empty. Letting your tank drain all the way to the bottom before you refill is asking for trouble.
How to clean coils?
Rinse the coil under hot running water: Hot water will wash away any leftover debris or liquid that was sticking to the sides. Shake out the water: Gently shake out any water that is sitting between the coil wraps and then let your coils air dry on top of a paper towel or other absorbent material.
How many dry hits does a vape tank take?
Once your device has been appropriately filled, reassemble the tank and attach it to your battery. Take four to five dry hits, which is to say take a drag without activating your battery’s fire button. This allows the vape juice from the tank to siphon into the cotton of the wick.
How Do Vape Coils Work?
- Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour. They are made of three components: the heating element, wicking material and casing. The casing of a coil simply holds everything together and allows for the coil to be ea…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …