Here’s a really simple trick that’ll loosen the seal and help you remove the stuck glass from your tank. Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.
How do you remove the glass from a vape tank?
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.
How to keep your vape tank from getting stuck?
Make sure there’s always e-juice in your tank before you start vaping. Even when you take special care of your tank, you can never be sure that it won’t get stuck. For when this frustrating event occurs, it can be tempting to hammer your tank, or throw it against the wall just to get it open.
How do you get a vape out of a tight spot?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
How to remove a vape tank coil?
Many modern vape tanks have coils that screw into both the top and bottom hardware. Sometimes, the coil will remain attached to the top half of the tank rather than the bottom. If this happens, you can remove the coil in the same way; just twist it counterclockwise. Grip the main body of the coil rather than the threading at the bottom.
How do you loosen a tight vape tank?
Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen. We know a stuck vape tank can be very frustrating, and even tempt you into a rage.
How do you remove a stuck vape glass?
3:004:45Removing Glass From a Sticky Subtank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can twist it and your glass should come off what that does just you're playing with thermalMoreYou can twist it and your glass should come off what that does just you're playing with thermal expansion. And contraction. Basically the glass is gonna be warmer.
How do you open a tight atomizer?
0:000:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a lot of people have this problem with vapes the tanks always get stuck. Especially if you don'tMoreSo a lot of people have this problem with vapes the tanks always get stuck. Especially if you don't use them for a while which happened to me. So. I had a hard time opening this until I got two rubber
How do you open the top of a vape?
How to Refill a Vape TankTo refill your top-fill tank, start by removing it from the body of your e-cig mod.Unscrew the base and carefully remove the coil. ... Next, unscrew the top of the tank to add your e-liquid. ... Reassemble your tank and screw all the pieces back together tightly.More items...•
How do you disassemble a stuck vape tank?
Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
How do you get a stuck tank out of a Mod?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar. Now, don't mistake “hot water” for boiling water. The latter can break your vape tank.
How do you open a Smok tank?
0:143:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to change out your coil. You hold it tight here unscrew your bottom as you can seeMoreIf you want to change out your coil. You hold it tight here unscrew your bottom as you can see there's no ring right in here always make sure it's on correctly.
How do you open a vape bottle?
To open a childproof e-liquid bottle, grip the bottle with one hand, then push the cap downwards and twist anticlockwise. It might take a bit more force than you'd think! You might need to repeat the downward push/twist motion a couple of times to finally get the cap loose.
How do you open a Smok vape?
Here's a quick rundown of how to turn on and unlock your SMOK vape and what to do if you run into a problem.First, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu.More items...•
How to remove glass from a vape?
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.
How to disassemble a vape tank?
In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you’ve unscrewed the tank, you’ll have two halves: the bottom hardware with the atomizer coil attached and ...
How to remove stuck glass from a tank?
Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.
Why is my vape tank stubborn?
In some cases, a vape tank can simply be stubborn because the machining of the threads isn’t so good. That could be a sign that you’ve gotten a counterfeit tank, but it’s more likely just a case of subpar workmanship. Some vape manufacturers are better than others.
Why is my vape tank not moving?
One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.
How to disassemble a Uwell Crown 3?
To disassemble the Uwell Crown 3 or another tank with a locking chimney, remove the tank’s top and bottom hardware. Take the key included with the tank and place it in the chimney under the tank’s top hardware. The key locks into the matching notches in the chimney. Twist the key to unlock the tank.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
What to do if someone is badgered into coming over?
If there's anyone else in your house or who can be badgered into coming over for any ol' reason, consider asking them to try opening the tank. Especially if they have larger hands, are visibly more muscular, or have a creepy tendency to perform feats of strength beyond their apparent capabilities.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
curiousJan Super Member Verified Member ECF Veteran
I wouldn't expect them to replace it since it's not defective, just broken. You might want to use plumber's/teflon tape against the glass rather than scotch, although you may do more damage trying to remove the tape you already applied.
greasegizzard Vaping Master Verified Member ECF Veteran
I have an iJust 2, and I haven't been able to get the tanks apart. I like taking my tanks apart to clean them but haven't had any luck with these. I quit trying out of fear of breaking then, so I don't know for sure.
Maiar Ultra Member ECF Veteran
Sweet vapes to the rescue again. Eleaf iJust 2 Glass / Top Replacement - Eleaf Tanks - Eleaf - Tanks & Coils
greasegizzard Vaping Master Verified Member ECF Veteran
Sweet vapes to the rescue again. Eleaf iJust 2 Glass / Top Replacement - Eleaf Tanks - Eleaf - Tanks & Coils
Maiar Ultra Member ECF Veteran
Yeah, I bought a Melo 2 top and glass from then recently for like $6...good price.
Douggro Ultra Member
This one is 11.19 for 15 and ships worldwide for free. That's good because I'm in Europe. The piece I need is just the glass, not the whole tank.
coilburner Account closed on request ECF Veteran
Just be aware that FastTech doesn't always live up to their name when it comes to shipping.. You know the old joke about a slow boat to China? They ship some of their stuff on that boat.
Why does my vape tank leak?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.
How to remove e juice from a tank?
First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.
Why do multi strand coils pop?
Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.
What happens if you inhale too much liquid?
If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.
Why does my tank leak out of the airflow holes?
Put a lid on it – If you leave a tank without the top cap, it will leak out of the airflow holes. That’s due to the pressurized nature of tanks. Make sure that your tank is empty if you plan on leaving your top cap off for extended periods of time—anything longer than it takes to fill it.
What does it mean when a juice tank is not airtight?
Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.
How to prevent juice from leaking?
Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.