how to fix no coil detected on a vape mod

by Janet Schimmel III Published 2 years ago Updated 1 year ago

The No Coil Detected Check List Mod Issue Inspect the connection on your mod and make sure it doesn’t look disturbed or different than normal. Use a toothpick or a combination of a toothpick and paper towel to dig around the center pin to remove any debris and ensure it moves freely.

It has to be seated right inside your tank to make a proper connection to your vape mod. Unscrew the coil and screw it back in again, making sure it is fully screwed in and there is no cross threading. Now try the tank on your mod and see if this has solved the problem.Sep 9, 2020

Full Answer

Is your vape mod not reading the coil properly?

Aug 16, 2019 · We had listed some of the normal reasons that may cause no coil detected on your mod.More details at:https://geekvape.com/aegis/Aegis-Legend-Kit.htmlIf you s...

Does geekvape say no coil detected?

May 25, 2020 · More details at:https://geekvape.com/aegis/Aegis-Max.htmlFind more interesting contents: Instagram: https://www.instagram.com/geekvapetech/ Facebook: https:...

What does “no coil detected” mean?

Sep 18, 2018 · 1. Your coil head may be too tightly connected to the atomizer base, causing an error. A: Please reinstall the coil head. Don’t need to tighten too much, try again. 2. If you still can’t solve the problem, then it may be that your coil head is broken. A: Please find the spare coil head in the package and replace it.

Why is my vape not detecting my atomizer head?

Apr 12, 2020 · Go slow as you tighten the tank, like really slow, and see if there is any point in its travel that the mod detects it. If so, just leave it there, if it can stay there without being all wiggly. Otherwise, try turning it very slowly past that point and see if the connection holds.

Why won't my vape detect my coil?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.Jun 22, 2020

Why is my new coil not working?

Check that your tank contains enough e-liquid to cover the airflow holes in the coil to avoid the coil drying out. If none of that worked: It's possible that you're taking too many puffs in quick succession which means that the coil doesn't have enough time to wick new liquid through before you take the next hit.

Why does my mod keep asking if new coil?

When you put a new coil in a tank, the mod will recognise that it's a different coil to the previous one you had in it because of the resistance change. When it says new coil, select yes and it will work fine. If you select no it will still work but will still use the resistance of the previous coil you had in it.May 16, 2021

Why does my Smok alien say no coil?

In some cases you may get this warning when there is a coil attached, there are a few reasons this may happen: Coil not screwed in properly - This is one on the most common issues. Just remove the tank head and screw your coil a little tighter.Aug 23, 2018

How do I get my vape to work again?

Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.Jun 28, 2020

Is my coil not working?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.Oct 3, 2016

Why is my aegis vape not working?

Geek Vape Aegis Solo Not Working

If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.

How do I change the coil on my aegis geek vape?

When the pod is empty, remove it from the Aegis Hero and invert it. You'll see the atomizer coil on the bottom of the pod. Pull it out and push the new coil in. Fill the pod and wait several minutes before continuing to vape.

How do you reset the coil on Aegis legend?

GeekVape Legend 2 Menu

Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Press and Hold Fire & + button – Brightness Up.May 21, 2021

How do you reset a SMOK mod?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.Aug 23, 2018

How do you unlock a SMOK vape?

Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don't have to literally count out five clicks every time.Jun 14, 2018

Why is my SMOK vape not working?

SMOK Vape Won't Turn On

If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.Oct 22, 2019

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

Why won't my mod work?

Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work. In this quick guide you’ll learn how to fix this common annoyance and you’ll be back to vaping in no time!

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

Why is my mod reading the new tank correctly?

If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.

Why is my pod not firing?

Dirt or ejuice can prevent a proper connection between your pod and the device and this can cause the device to not fire or to throw a check atomizer/no atomizer error.

Why is my atomizer checking?

Sometimes a check atomizer error can be caused by your coil. If cleaning your contact points didn’t work then you can try reseating your coil. You’ll want to take apart your tank as if you were changing the coil. Unfortunately, this can be a little bit messy and isn’t always convenient to do if you have a considerable amount of ejuice left in your tank.

How to reset 510 pin on a mod?

Take a screwdriver and gently push down on the 510 connector inside of the mod. This can help ‘reset’ the pin and allow it to spring back up. But if this doesn’t work there isn’t much else you can do.

Why is my vape mod showing the same message?

If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.

How to tell if a vape tank is fine?

Pop a different vape tank on the mod and see if it is showing the same message. If it is then we know that your tank is fine and we need to take a closer look at your e-cig.

How to get vape juice out of a tank?

Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.

Why is my 510 e-cig not working?

It can be because of the 510 connection, the vape coil itself or the bits in between. If your vape mod can’t detect your atomizer head, then it cannot properly deliver power to it. So your e-cig will throw up that message to let you know that there is a problem.

What does it mean when an e-cigarette says no atomizer?

An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.

How to remove a tank from an e-cigarette?

Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there. Then take a cotton bud, or piece of paper towel and press it gently into the hole on the top of your e-cig.

What does it mean when your tank is sat flush with a rubber o-ring?

If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.

Vape-FAQ.com