Full Answer
What should I look for when buying a vape coil?
When you buy a vape coil, always ensure that it's compatible with your device. Where a dual or quadruple coil will use multiple coils to heat your wicking material, mesh coils are strips of metal with tiny holes punched into them.
What is a vape coil?
The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire.
How many watts (W) does a vape coil use?
Modern coils will most often have an advised power level printed on them, usually recorded in Watts (W), for example, 40 - 55W. If you stay between this range you’ll have a far better vaping experience.
How to replace a vape coil without removing it?
Unscrew the coil head from the bottom cap and screw the new coil into it. Put a drip of e-liquid onto each of the wicking ports on the new coil (the exposed parts of cotton you can see). This helps prime the coil and reduce the time needed before you can vape without getting a dry hit. Reassemble your tank and fill with e-liquid.
How do I know what coil to use in my vape?
The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You'd then measure this resistance with the help of an Ohmmeter. Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current.
Do all coils fit all tanks?
A lot of people are not aware that many tanks can use coils from other tanks, and some coil brands are better than others depending on the wattage you vape and juice you are using, etc.
Do all vapes use the same coils?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren't suited to all e-cigs.
Do coils fit any vape?
If the tank uses the coil in one category, it is generally possible to use any other coil in that category. i.e. SMOK Baby Beast uses TFV8 coils Baby, so it is compatible with any other coil in the small category.
Are vape coils universal?
Unfortunately, vape coils are not universal and every coil won't work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices.
Are Smok coils universal?
No. All SMOK coils are not the same. Of course, you need to make sure you select the right one for your tank, but you also want to make sure you vape it at the best wattage.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm 316L stainless steel coil is good flavour and vapour production, while the 1.2ohm Kanthal coil is a perfect if you prefer high nicotine ejuice. The Aspire PockeX heads lead a new revolution in coil technology.
What does the coil number mean on a vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What ohm coil is best for flavor?
around 0.3ohmsThe sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
Can I fit any tank on my vape?
Tanks and mods are pretty interchangeable these days, as long as they have the 510 connection. The only problem you may run into (depending on tank/mod) is that some mods offer more wattage ranges, and you don't want a tank that requires so much wattage your mod won't support it well, causing poor battery life.
Can you mix and match vape tanks?
That being said, most sub-ohm tanks on the market are compatible with virtually any sub-ohm mod in the physical sense. As long as they both have that connection, they can physically fit together.
What is a vape coil?
The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You’d then measure this resistance with the help of an Ohmmeter.
How to replace a coil in a tank?
However, there are a few general steps you can follow regardless of which variety you have when you’re replacing an old coil. Unscrew the battery from the tank. Turn the tank upside down and unscrew the metal bottom cap. Unscrew the coil head from the bottom cap and screw the new coil into it.
What is the difference between a low resistance coil and a high resistance coil?
Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current. Despite being so integral, the coil is a fairly simple mechanism. It’s constructed from a coiled wire or a piece of mesh and some wicking material (usually cotton).
Why is my vape coil burning?
The reason for this is that the tank is running too hot for the coil to manage it. Sometimes chain vaping can also affect the lifespan of your coil as it can get too hot and start to burn the coil. If you inspect your coil and wicking material more closely, you’ll see that the cotton is often discoloured and burnt.
What is Kanthal coil?
KANTHAL COIL. Kanthal is a combination of iron, chromium and aluminium and is a popular wire used in both pre-made and home made coils. It has a super quick ramp up time and as such, creates impressive amounts of vapour. Kanthal coils are only suitable to be used in wattage mode.
What is ceramic coil?
A ceramic coil material is porous, so air passes through it particularly well and offers a super smooth draw. Many reviewers find that the ceramic material brings out the flavour more than other materials. They tolerate high wattages well too so they’re a great addition to the more high-powered mods on the market. Ceramic coils have also been touted to last longer than cotton coils and help prevent dry hits.
How to make a wire glow?
Oxidise the wire: Cut a 4-5 inch piece of wire, hold one end with tweezers or pliers and heat the wire at the other end until it glows orange. Slowly move the flame down the length of the wire until it all glows orange. Then swap sides and repeat the same steps. This will make the wire much easier to work with.
What is Kanthal coil?
A hardy material with excellent resistance to high temperatures. Kanthal: Made from a combination of aluminium, iron and chromium, kanthal vape coils are particularly suited to high wattage vape mods. With a super quick heat up time, expect some serious vapour production.
What material is used to make vape coils?
Let's take a quick look at some of the materials used to make vape coils and how they might affect your vape: Ceramic: A porous material - ceramic coils are known to enhance the flavour of your vape compared to other materials used to produce vape coils.
How long should I wait to fill my vape coil?
Priming your vape coil is easy and straightforward. Simply fill your tank with e-liquid and allow the tank to stand for anywhere between 5 and 30 minutes - the longer the better! Your other option is to manually soak the wicking material through the openings in the atomiser head. A few drops should be enough.
How to get vape coils to taste fresh?
Cleaning your vape coil is easy and will quickly restore your vape coil to a state that enables your vape to taste fresh, clean and more enjoyable. Follow the simple steps found below to regain flavour: Remove your vape coil, including wicking material from the coil head and place into a small bowl of warm water.
How to change coil on vape?
However, these general rules will enable you to change your vape coil like a pro: Remove the e-liquid tank from the battery. Turn the tank upside down and unscrew the cap found on the bottom. Carefully unscrew the coil head from the cap and replace with your new coil.
What is a vape pod?
For instance; if you're talking about an e-cig, vape pen, or vape pod, all are vaporisers intended for use with e-liquids or cartridges. Similar to other vaping components, vape coils are just one of the names given. Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery.
Why is a low resistance coil used for sub ohm vaping?
A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature. This creates some fairly sizeable vapour clouds.
How long do vape coils last?
If you vape a lot, your vape coils may only last about 5-7 days. If you vape occasionally, it may last you a few weeks. And finally, if you're a really light vaper you could probably only change out your coils once a month or less.
Why does vaping taste burnt?
When you're vaping with a coil that needs replacing, you'll experience a burnt taste no matter what e-juice you use or what modifications you try to change. Once you sense this unpleasant taste, you need to make sure to replace your coil really quickly to avoid damaging other parts of your vaping device.
How to know when to change vape coil?
1. Experiencing a "Burnt" Taste in Your Mouth.
What is the difference between a lower resistance coil and a higher resistance coil?
Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
Why do I have fewer clouds when I vape?
If you're noticing fewer clouds than usual, it's likely due to a bad coil. Fewer vapors affect your satisfaction level and rhythm you have while vaping so you will be able to notice this right away. Change the coil and this issue will likely go away instantly.
Do you need to replace a vape coil?
It plays a very critical role in your device, so you should never put it off or ignore the signs that it needs to be replaced. Sometimes it will be very obvious that you need to swap the vape coil, while other times you may not even realize you need to. Replacing your vape coil regularly will extend the overall life of your vape and give you ...
Do vape coils last forever?
Regardless of if you're a first-time vaper or more advanced, the time will come when you need to replace your vape coil. Unfortunately, they don't last forever and they need replacing quite frequently. The coil is ultimately responsible for heating the e-liquid and turning them into vapors for your pleasure.
What is Ni200 wire?
Nickel wire (Ni200) is a very pure nickel blend of wire (99.6% nickel) used for temperature control (TC) vaping. The wire is used for TC vaping because it’s resistance changes more than kanthal or nichrome when heated up, so TC mods can detect these changes and use it to infer the temperature of the coil. This allows your mod to limit the maximum temperature of your coil and thereby work in TC mode. This is the most common TC wire, but it is challenging to work with because it is very flexible and brittle. Setting up wicking with nickel wire is also quite challenging.
What is nichrome 80?
Nichrome (technically Nichrome 80) isn’t used as frequently as kanthal, but it was common in the early days of vaping. It’s a mixture of nickel and chromium, and like kanthal it is used in VV/VW vaping. The material doesn’t change in resistance very much when the temperature increases, which again makes it very reliable for ordinary vaping but unsuitable for temperature control vaping. Nichrome doesn’t stand up to heat quite as well as kanthal, but both can support temperatures well beyond what vapers will reach. However, nichrome is a little harder to work with than kanthal and that’s why it has fallen out of favor with vapers.
What is Kanthal coil?
It’s a mixture of iron, chromium and aluminum, and it can withstand really high temperatures, which makes it a fantastic choice for vaping. The resistance of kanthal doesn’t change much when the temperature increases, which means a kanthal coil will perform reliably across a wide range of wattages. This also means that it isn’t suitable for temperature control vaping.
What are coils made of?
Most coils are made out of one of a few different materials, which depends on the intended use of the coil. Most coils are made from kanthal, but other materials such as nichrome, titanium, stainless steel and nickel are also common.
What is the best material for TC vaping?
Titanium wire is another option commonly used for TC vaping, preferable to Ni200 for people building their own coils because it’s much stronger than nickel wire. It has about twice as much resistance per inch than nickel, which makes it a better material for many purposes, but there are some downsides too. If you dry-fire your coil (i.e. press the fire button without a wick or coil inserted), it can get hot enough to form titanium dioxide, which is harmful to your health if inhaled regularly. The best advice is to avoid dry-firing your coil if you’re working with titanium (although this is best avoided anyway ). Titanium resistance wire is also fairly expensive to buy.
What is the best wire for a TC mod?
Stainless steel (a chromium, nickel and carbon alloy) is the most versatile wire type on the market because it can be used in both TC and VV/VW modes. The material changes in resistance enough with temperature to register on most TC mods (although some don’t support it), but the resistance is usually high enough to be used with VV/VW devices. Stainless steel is also easier to work with than both titanium and nickel, and is more affordable too. Stainless steel 316L is the most commonly-used grade, but other grades can be used too. If your TC mod has an adjustable TCR feature (which tells the device how much the resistance changes with temperature), you’ll be able to set it up to work in TC mode with any grade of stainless steel, although 316L is still standard.
What is the gauge of wire?
After the materials, the next most important piece of information for a rebuilder is the “gauge” of the wire. This is simply a measure of how thick the wire is. A wire with a higher American Wire Gauge (AWG) number is thinner, and one with a lower AWG number is thicker. Thicker wire has less resistance per inch than thinner wire. You can understand this by thinking about a pipe with water flowing through it: the water will be able to flow much more easily in a wider diameter pipe than a thinner diameter one. This is exactly the same for electrical current through resistance wire.
How to replace coils in a vape?
Step One: Empty out your vape tank if necessary. Step Two: Unscrew the base from your tank. Step Three: Unscrew your coil, then separate the top portion of your tank so you can replace your coil. Step Four: Attach your new coil to your tank, then re-attach your atomizer parts in the reverse order you took them apart.
How to change clearomizer coil?
Step One: Invert your clearomizer so it is upside-down. Step Two: Unscrew your base and atomizer head from the bottom. The stem will remain intact inside your clearomizer. Step Three: Screw on your new coil, and reattach the base and head in the reverse order you took them apart.
What is a top coil clearomizer?
Top coil clearomizers are perfect for vape wizards seeking a cloud chasing experience that provides warm, flavorful vapor and thick, vibrant clouds. Replacing a top coil clearomizer is quick and easy; once you learn the proper steps required to change out the coil, you’ll be able to perform the task in a flash.
How to disassemble a top coil clearomizer?
Step One: Begin by emptying out your tank. When disassembling a top coil clearomizer, the stem of the atomizer comes out along with the base and atomizer head, so starting with an empty tank ensures that you’re able to access the coil quickly and efficiently. Step Two: Next, unscrew the base and coil head. If done properly, the stem should come out ...
What is a multiple coil atomizer?
Multiple coil atomizers are great for those seeking a lavish, extra-indulgent vape experience. Changing the coils for this type of atomizer is much like changing the coils for any other atomizer, except you’ll be changing multiple coils instead of just replacing one.
How to use RBA?
To use an RBA, you must build your own coil (which means you will physically wrap the coil by hand), attach it to your atomizer, and insert your own wick for a one-of-a-kind vape experience. The final type of atomizer is the sub-ohm tank. Sub-ohm tank atomizers use coils that provide less than 1 ohm of resistance.
What is the difference between a top coil and a bottom coil clearomizer?
Top coil clearomizers are filled from the top and result in warm, flavorful vapor. Bottom coil clearomizers are a bit harder to fill since the juice can’t be inserted from the top, but are undoubtedly worth the extra effort: they provide a unique throat hit that provides cool vapor of the highest quality.