Aspire Nautilus Prime Tutorial: Filling the Tank
- Step 1. Pull the tank up and out of the unit.
- Step 2. Turn the tank on its side and locate the rubber stopper that closes the tank.
- Step 3. Pull out the stopper. The edge of your fingernail works best but the stopper is pretty easy to dislodge and it...
- Step 4. Dispense vape juice into the tank. The filling port is...
How do I use the Aspire Nautilus vaporizer?
Now you can attach the Aspire Nautilus vaporizer to your battery of choice and begin vaping. While in this phase you use the Airflow Adjustment Ring to help give your hits more or less warmth and strength. You can do that by twisting the Airflow Adjustment Ring clockwise or counterclockwise.
How do you fill a top-fill vape?
If you need to fill your top-fill vape, start by unscrewing the airflow base at the bottom of the vaporizer and pulling out the coil. Next, prep the coil by dropping 1 drop of e-liquid onto each cotton hole located on the coil.
How do I use my e-cig?
To start vaping, just press the large silver "fire" button while you hold the e-cig to your lips and inhale. Since the unit will usually default to the highest wattage setting, you'll likely notice that the vapor is fairly warm. The temperature of the vapor is one of the things you can adjust by playing with the wattage setting.
What are the parts of an Aspire Nautilus atomizer?
The Aspire Nautilus Sleeping After a Long Day. Mouthpiece – The most basic of all atomizer pieces, your mouth should be going here. Glass Tank – This is where you’ll put the eLiquid. Tube Body – The inner metal tube inside the Glass Tank, this part will get heat from the Coil Unit.
How do you fill a nautilus 3?
11:4813:40Aspire Zelos 3 kit with Nautilus 3 tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust plug and play push the coil in screw the base. On it will open up your juice flow.MoreJust plug and play push the coil in screw the base. On it will open up your juice flow.
How do you fill the Aspire Nautilus 2 tank?
2:064:55How to fill tank and replace coil on a Nautilus 2 tank. - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you fill it if you overfill a little bit a little bit like right up to the top of the coil. YouMoreIf you fill it if you overfill a little bit a little bit like right up to the top of the coil. You want to leave it a little give it a little bit of a gap because.
How do you fill a aspire Nautilus GT?
1:4310:33Nautilus GT Kit by Aspire - Taifun Designed! - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's go ahead and unscrew the base here. And there is your tank. Section now if you wanted to getMoreLet's go ahead and unscrew the base here. And there is your tank. Section now if you wanted to get this glass out you would unscrew this part right here.
How do you fill the bottom fill on a vape?
Follow these steps to refill your bottom fill tank:Unscrew the tank from the body of your vape kit.Remove the coil by unscrewing it from the top of the tank.Put one or two drops of e-liquid through each hole in the coil casing to saturate the coil and preserve its life.Screw the now saturated coil back into the tank.More items...•
How do you fill an Aspire vape tank?
0:241:45How To: Fill And Prime The Aspire Revvo Vape Tank | VaporleafYouTubeStart of suggested clipEnd of suggested clipYou'll need to press your coil on to the top of. It. Then screw your compression nut back down toMoreYou'll need to press your coil on to the top of. It. Then screw your compression nut back down to fill your tank you'll want to hold it straight up and down take your juice bottle.
How do you open the tank on a Nautilus 2S?
0:071:19How To Change A Nautilus 2 Coil - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf. It's too tight the base may turn with it so holding on to the base while unscrewing the coil canMoreIf. It's too tight the base may turn with it so holding on to the base while unscrewing the coil can help to avoid this as with all new coils of priming helps to prepare the coil.
How long do aspire Nautilus coils last?
about 10 days“The coils are the consumables, the use frequency, battery voltage, the PG:VG proportion of e-liquid all can impact the coils' life, it is good that the VG proportion under 50%. Under regular using [sic], the BVC coils will last about 10 days.”
How do you change the coil on a Nautilus GT?
0:583:41How To Change A Nautilus GT Coil | Aspire GT Tank [Update] - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just hold it stiff on the top. And we just unscrew the bottom like so until it comes apart andMoreWe just hold it stiff on the top. And we just unscrew the bottom like so until it comes apart and you've got the coil sat in the base of the tank.
How do you clean a Nautilus GT tank?
0:535:08How to clean your Aspire Nautilus 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you'd like you can also just soak those in water. Take the coil out. This is real simple justMoreIf you'd like you can also just soak those in water. Take the coil out. This is real simple just unscrew don't clean down on your contact pin inside and out get your threads. Again.
How do I open my vape tank?
0:000:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had a hard time opening this until I got two rubber bands. And just wrapped them on the two partsMoreI had a hard time opening this until I got two rubber bands. And just wrapped them on the two parts top and bottom there you have to twist and then you twist opposite directions obviously.
How do you open a vape bottle?
To open a childproof e-liquid bottle, grip the bottle with one hand, then push the cap downwards and twist anticlockwise. It might take a bit more force than you'd think! You might need to repeat the downward push/twist motion a couple of times to finally get the cap loose.
How full should vape tank be?
Fill it enough so that you can vape as much as you would like with that flavor without getting an dry hit. Run out of juice once, and you'll learn your lesson about dry hits. A safer method is to use a smaller tank. Larger tanks require more liquid to keep the device properly working.
Step 2
Turn the tank on its side and locate the rubber stopper that closes the tank.
Step 3
Pull out the stopper. The edge of your fingernail works best but the stopper is pretty easy to dislodge and it shouldn't give you much trouble no matter what method you try.
Step 4
Dispense vape juice into the tank. The filling port is relatively small but you should be able to fill the tank using either a glass dropper, a needle nose plastic bottle or an e-juice syringe.
Step 6
Snap the tank back into the top of the unit. The tank is shaped so that it's obvious what orientation it needs to be in order to fit in place. Make sure the tank clicks into place and that it is flush with the top of the unit.
How to detach a nautilus connector?
By twisting the connector ring counter clock-wise, the entire bottom part of the Nautilus will detach from the Tube Body. Once you’ve removed it you should see the Coil Unit sitting inside of the Adjustable Airflow Ring and Connector Unit. Make sure the Coil Unit is firmly in place by twisting it clockwise into the Connector, with the open side up towards you.
Where do you put eliquid in a tank?
When filling the tank do not drip the eLiquid into the Tube Body in the center of the tank. This will cause the eLiquid to go straight into the mouthpiece. Instead, drip your eLiquid into the Glass Tank.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to remove coil from vaporizer?
Remove the coil from the bottom. Unscrew the bottom metal piece of the vaporizer and set it aside. Then, slide the coil out from inside of the tank.
How to fill a e-liquid tank?
Fill the tank to the indicated line with e-liquid. Unscrew the top connecter from the tank to reveal the access points for the e-liquid. Then, hold the dropper part of your e-liquid bottle up against the inside of the tank. Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank, which indicates fullness.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to start vaping with a e-cigarette?
To start vaping, just press the large silver "fire" button while you hold the e-cig to your lips and inhale. Since the unit will usually default to the highest wattage setting, you'll likely notice that the vapor is fairly warm. The temperature of the vapor is one of the things you can adjust by playing with the wattage setting.
How to find the sweet spot of a vape?
To find your sweet spot for each flavor, adjust the wattage up and down. It works well to start with the wattage clicked all the way down to the lowest level. Then slowly adjust upward until you find the level that works best for you. This level is likely to be somewhat different for each vape juice flavor since each flavor has it's own unique profile.
What is the coil size of a vape?
The unit comes with both a 0.7 oh m coil or a 1.8 ohm coil. We prefer the 0.7 ohm as we find that it makes the flavor of our vape juices really shine. However, if you want to experiment, you can try the 1.8 ohm coil instead.
What is the sweet spot of vape juice?
Every vape juice flavor is unique and will have its own particular "sweet spot," the heat level that makes it really shine. Likewise, every vaper will have personal preferences and what works for one person won't necessarily work for another.
How to increase wattage of e-cigarette?
For basic operation, you really don't need to understand anything about wattage, volts or ohms. All you need to know is that when you click the "up" button, it will increase the wattage resulting in more heat. More heat will increase the temperature of the vapor and will change the flavor. When you click the "down" button , the wattage will be lowered and your e-cig will operate at a lower temperature.
How many coils does the Aspire Nautilus Prime come with?
Next, make sure you have installed a coil. Your Aspire Nautilus Prime comes with two coils that look like this:
How to turn off e-cig?
The unit comes with a safety feature that allows you to turn it on or off so that you can disable it when you want to stow it in a purse or pocket. Click the large silver "fire" button five times in quick succession to turn the unit on or off.
