One of the most common reasons for a cartridge to stop pulling is due to the oil being too thick. This may cause the holes in the cartridge to become clogged and make it hard to pull. In the event that this happens, first, check if your cartridge is glass or plastic.
How to fix vape pen cartridge?
“A simple way to fix this is by removing the cartridge from the vape pen, getting a needle, and simply gently poking the needle through the airflow holes until the oily residue is gone,” advised Peki.
How to fix a vape cartridge?
Preventing Chamber Flooding
- Hit the Vape Every Few Days. Avoid leaving your vape sitting around at room temperature for long periods with a cart full of delta 8 THC.
- Make Sure it isn’t Primed. Make sure the cart isn’t primed if you won’t hit it every few days or need to store it for an extended period.
- Take Smaller Hits. ...
- Check for Leaks. ...
- Store Your Vape In an Upright Position. ...
How to open a Dank Vape cartridge?
Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it. Is dank vape carts legit?
Why is my Dab pen not working?
Try the following:
- Check if you’ve pressed the power. Check if you’ve pressed the power button too often and turned it off.
- Check if you need to charge it.
- Check for connection issues.
- Check our Battery Safety page.
- Check your atomiser.
- Check your 510 pin.
- Check your coil.
- Check your tank isn’t over tightened.
Why is it hard to pull from my vape?
One of the most common reasons for a cartridge to stop pulling is due to the oil being too thick. This may cause the holes in the cartridge to become clogged and make it hard to pull. In the event that this happens, first, check if your cartridge is glass or plastic.
Why do carts get hard to hit?
Condensation Buildup. The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit.
How do I stop my vape cartridge from clogging?
How to Prevent Clogs. Keep it warm. Try to avoid leaving your cartridges in cold areas – this causes the oil to thicken and increases the likelihood of a clog. Store it vertically.
Why does my vape pen not draw?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How tight should a cart be?
Screw the cartridge into the battery clockwise and make it firmly finger-tight, but do not over-tighten. Store the cartridge upright if you can—oil can seep into the mouthpiece if conditions are right.
Why does my cart taste burnt when it's full?
The most common reason your oil vape tastes burnt is that you did not heed the warning of a dry hit, and ignited your wick. When a wick is saturated, it transfers the heat from the atomizer into the vape juice to create vapor. If there is no vapor, the heat burns the wick, creating nasty, scorched-tasting smoke.
Why does my eliquid look dark?
If the eliquid looks darker then usual its probably because the coil is gunked up and needs to be changed.
Can you use vodka to clean coil heads?
Yes thats s the coil head. Like DJ said, you could have gotten a bad one. CLeaning..I use vodka rather than rubbing alcohol as I prefer not to risk any leftover residue from cleaning (they both evaporate well). Water works too. Use a q tip for scrubbing. I'd try another coil first though.
Types of Cartridges
Before we go into our troubleshooting tips, it’s important to know the different types of vape cartridges you can use. The type of cartridge that you purchase impacts the types of common issues that can come with it. The two main types of vape cartridges are:
Get Your Vape Cartridge Today from Remedy!
Here at Remedy, we are dedicated to providing the highest quality medicine and products to our valued patients. Visit our menu to place an online order and sign up for our VIP program to receive our daily special text messages.
How to store a cartridge?
For the cartridge, store it with the mouthpiece facing UP when it is not in use to allow the oil to flow downwards toward the wick inside and avoid air bubbles.
Why is vaping so popular?
Since vaping administers stronger doses of various cannabis compounds more quickly and without the typical cannabis smoke odor, it is highly popular due to its discretion and convenience. However, as many experienced patients can attest to, this method of consumption isn’t devoid of setbacks.
How to heat stubborn concentrate?
You can heat stubborn concentrates by using a hairdryer. Place the cartridge upright on a hard surface 6 inches in front of a hairdryer for around 20 to 30 seconds until you see some bubbles rising to the top of the substance.
Why does my oil pump have air bubbles?
Ensure Adequate Airflow – Air bubbles are a common cause for insufficient pulling of oil vapor. In addition to being stored in a cold environment, a poor connection between the cartridge and battery can be another reason for unwanted air bubbles.
Can you vape with stars aligned?
Many things could be causing you to have a less than satisfactory vaping experience. The stars don’t have to align in order for you to have a perfectly smooth draw from a vape pen, but everything must be in working order for the best possible effects. From oil viscosity to battery power, you’ll want to inspect all elements if you aren’t able to pull consistent vapor.
Do dispensaries have MMJ certification?
Local dispensaries when dealing with MMJ Certified patients are more amicable to returns should you immediately find a defect in the vape itself, being MMJ Certified shows you have a medical need and are a highly valued client to the dispensary.
What does it mean when your vape cartridge is low?
If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
How to get rid of a settled cannabis cart?
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds. Then reconnect the cart and take a pull. If your airflow is still obstructed, repeat the process again.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
How to tell if vape cartridge is bad?
The first thing to check is that the cartridge has the same viscosity and clarity as when you first bought it. The oil should still be some uniform shade of light yellow to amber.
How does heat affect vape cartridges?
While it may seem counterintuitive that something whose purpose is to be heated can damage it, exposure to higher temperatures over time will speed up the breakdown of both the oil and the THC. Since the tubes used in a vape cartridge are generally made as cheaply as possible, they transfer outside heat into the oil pretty easily. This heat can come from a high-temperature day, the hot interior of a car, or just the body heat transmitted into a pocket. The other main factor when it comes to the premature aging of a vape cartridge is exposure to light, and especially sunlight. Whether it’s bud, an edible, or a concentrate, light will snap off those delicate hydrogen atoms, turning psychoactive THC into boring (but still beneficial) CBN.
How to increase vape cartridge longevity?
There are a couple of simple ways to increase your vape cartridge’s longevity. Storing your vape in a case can increase the longevity of the cartridge. photo credit. Just like with flower, how long your vape cartridge stays potent depends on how much care you put into storing it.
Why does my vape cartridge age?
This heat can come from a high-temperature day, the hot interior of a car, or just the body heat transmitted into a pocket. The other main factor when it comes to the premature aging of a vape cartridge is exposure to light, and especially sunlight.
How to keep THC cartridges from turning brown?
Keep your cartridges out of direct light, and especially sunlight. Excess light can turn the oil brown and break down the THC molecules, which means losing both potency and flavor. Sunlight also means extra heat, which as mentioned above will damage the cartridge even more.
What is the bottom of a vape cartridge?
At the bottom of the cartridge is a metal plate that vaporizes the oil, which gets inhaled through the mouthpiece. The plate is heated by a battery on one end of the vape pen. Vape carts have increased in popularity due to their ability to bring them on-the-go and allow people to remain discrete.
How to store THC cartridges?
Store your cartridge in a cool, dry place and keep it out of the heat. At temperatures above 70 degrees Fahrenheit (21 degrees Celsius) the THC molecules begin to degrade into CBN and the oil starts to denature.
What does it mean when your vape cartridge is clogged?
When a vape cartridge is clogged, it means that there’s no airflow. This will directly interfere with your cartridge’s ability to produce vapor.
What Causes a Clogged Cartridge?
See, each type of concentrate or oil has its own viscosity level which refers to the thickness of the product. The higher the viscosity, the more likely it is to clog up your cartridge due to certain changes such as temperature, pressure and even sun exposure.
Why does my oil cartridge clog up?
The higher the viscosity, the more likely it is to clog up your cartridge due to certain changes such as temperature, pressure and even sun exposure. For one thing, you may find that on colder days, you’re more likely to experience a clog. This is not a coincidence. The viscosity of your oil or concentrate can become thicker when ...
How to fix a clogged mouthpiece?
The first thing to try is gently blowing into the mouthpiece. If the clog is near the top of the mouthpiece, then carefully dislodge whatever is getting in the way. Try blowing into it about five times being very careful not to use too much force or else you can end up causing a leak in the cartridge. Then give your device a try. If you have no luck with this method, move onto the next one.
Who is Ryan from Vapebox?
Ryan is a writer at Vapebox. He fully converted to vaping in 2014 and has been educating new vapers ever since.
How does a V1 vaporizer work?
The v1 is button-fired. A press of the button engages the coil, which in turn provides power to the heating coil in the atomizer and vaporizes the cannabis oil inside. For the best experience, hit the button, wait half a second, begin your inhale and release the button a second or two before your hit ends.
What is a vape pen?
Vape pens are one of the most popular vehicles for marijuana consumption, mostly thanks to their ease of use, simplicity and portability. Here at Sanctuary, we offer our v1 vape battery to consumers looking for a dependable, high-quality power plant for their 510 threaded vape cartridges.
How to warm up a vaporizer?
To access the warming function, press the beaker twice in quick succession . That initiates a low-voltage current, which is sent through the atomizer to begin warming up the device. Wait three to five seconds after the double-tap before giving the pen a gentle draw. Don’t inhale the vapors (in and out of your mouth, just like a cigar), but do several more light draws to allow the timer to run itself out over the course of 15 seconds. This should pop the clog and allow you to resume business as usual with your vape.
How to adjust heat on a V1?
To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat. If you’re looking for larger hits, bump the setting up to medium.
How to clear oil buildup in vapor shaft?
Often, the solution can be as simple as running a toothpick down and back up the mouthpiece opening of a cartridge to clear oil buildup in the vapor shaft. This should be performed with the cartridge at room temperature (not shortly after a hit while the inside of the cartridge is still hot).
Do you have to press the button to draw a vape?
You don’t need to press the button multiple times during a draw; the warmed, vaporized oil will be naturally drawn into the chamber once the coil is fired. If you heat the oil without drawing on the vape, you’re charring the product and will lose flavor and vaporization in the rest of the cartridge. Releasing the button before the conclusion of your draw helps cool the atomizer and oil around it, preserving flavor and helping to prevent clogging.
Can a vape pen clog?
All vape pens are susceptible to clogging, in particular if you are using an excessively high heat setting. Should your cartridge become backed up, there is a warming function built into the v1 device that may help get rid of the blockage. This should only be used to clear clogs; as discussed above, pre-heating the oil is unnecessary and can lead to charring and additional clogging, and it will not result in a bigger hit.