You can monitor your level of charge by the color of the battery indicator:
- BLUE: 20-100%
- ORANGE: 5-19%
- RED: 0-4% charge remaining.
How do I know if my Blu is fully charged?
When the indicator light turns off, your blu is fully charged. If the red-light blinks rapidly, remove the device for 10 seconds then re-connect the device to the USB cord. If the red light continues to blink rapidly, then the device is defective or has been depleted of its charge. The device should be discarded and replaced with a new one.
How long does it take to charge a myblu vape?
Once fully charged the red light will go out, indicating the device is ready to use. Charging should take between 20 and 30 minutes. The myblu is popular amongst new vapers who are using the device as a stop-smoking aid. It's a great choice in this regards!
Why does the myblu vape have holes in it?
The myblu has tiny holes on both sides of each pod: this is where the air enters which creates the vapour. It's important that neither of these holes are covered by your fingers or anything else. If the holes are blocked or covered, it can lead to e-liquid leaking from the mouthpiece when you inhale.
How do I know if my device is charging?
If the device is successfully connected, the LED light on the device will glow red. If the light does not illuminate, this could indicate an issue (addressed below) 4. Once fully charged the red light will go out, indicating the device is ready to use. Charging should take between 20 and 30 minutes.
What does it mean when my blu blinks blue?
If your battery flashes continually, it's an indication of a problem with the battery's performance. To fix the issue, try cleaning the battery first. Unscrew the battery from the blu Tank™.
How do I know if my battery is charging vape?
Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
Why does my blu blink 5 times when I plug it?
Short circuit protection If a short circuit occurs during operation, the indicator light will flash 5 times and the unit will shut down.
How long do blu Vapes take to charge?
For the myblu™ vape pen, the charging socket is located on the bottom of the device, beneath the LED light. It will take around 45 minutes to recharge your myblu™ device from empty.
What does the blue light mean on a vape pen?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
Do vape pens light up when charging?
Charger: Every vape pen comes with a charger. It has an indicator that lights up when it is fully charged.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
Why is my BLU not working?
Myblu isn't producing any vapour This can be caused by several things: the pod may not be fully inserted, there could be some liquid or residue between the pod or the battery connection/metal conductors on the pod may have been pushed down too far.
Why is my vape light flashing?
Generally, a blinking light indicates that the vape pen is trying to warn you that your device is not working as it should or the battery is low.
How do you charge blu battery?
Complete the following steps:Remove the battery and the USB charger from the package.Screw the battery into the USB charger.Plug the USB charger into a USB port. The light on the charger will glow red while the battery is charging. ... Remove the USB charger from the port once the battery is fully charged.
How do u charge a blu vape?
Unfold the attached USB cord from the pack and plug it into a USB-compatible charging port. Connect the rechargeable device to the USB cord with the charging contacts properly aligned. Once your device begins charging, the red light on the end will glow and remain illuminated.
How many hits does a blu vape have?
The company says one cartridge is good for 250 puffs, about a pack of cigarettes. You can re-order cartridges through the site or from a retailer (a five pack box can be purchased online at Blu's store for $12 or $13, depending on the flavor). Cartridges have different nicotine levels.
What charger should I use with the blu® device?
We do not recommend that you use any other charger or charging cord sold by a third party as it may not meet voltage and current requirements for t...
How do I charge the blu device?
Complete the following steps: 1. Remove your device and Liquidpod from packaging.***2. Unfold the attached USB cord from the pack and plug it into...
How do I know when the blu® device needs to be recharged?
• BLUE indicates the device battery has 20-100% remaining charge.***• ORANGE indicates the device battery has 5-19% remaining charge.***• RED indic...
How do I use blu® Liquidpods?
1. Select your preferred Liquidpod and remove from packaging.***2. Insert the Liquidpod into the rechargeable device. You will feel it click into p...
What are the safety features of the blu® device?
If you take a single puff lasting 10 seconds or more, the blue indicator lighting will flash 10 times and your device will shut down and reset afte...
What charger should I use with the blu® device?
We do not recommend that you use any other charger or charging cord sold by a third party as it may not meet voltage and current requirements for t...
How do I charge the blu device?
Complete the following steps: 1. Remove your device and Liquidpod from packaging.***2. Unfold the attached USB cord from the pack and plug it into...
How do I know when the blu® device needs to be recharged?
• BLUE indicates the device battery has 20-100% remaining charge.***• ORANGE indicates the device battery has 5-19% remaining charge.***• RED indic...
How do I use blu® Liquidpods?
1. Select your preferred Liquidpod and remove from packaging.***2. Insert the Liquidpod into the rechargeable device. You will feel it click into p...
What are the safety features of the blu® device?
If you take a single puff lasting 10 seconds or more, the blue indicator lighting will flash 10 times and your device will shut down and reset afte...
How long does it take for a vape pen to charge?
Charging usually takes between 1 and 3 hours, depending on the device.
How do vape pens work?
Vape pens are powered by batteries which in turn can be topped up whenever they run out of charge. You'll need to plug your charger into your device regularly to keep using it. Vape pens are powered by batteries which in turn can be topped up whenever they run out of charge.
Why does my blue pro light turn red?
On the blu PRO™ device, the LED light will begin to blink red to indicate that you need to recharge your device.
Can I use a USB charger with my Blue Pro?
To get the most out of your charger, make sure you only use the USB adapter that came with your myblu™ or blu PRO™ kit. Avoid using additional socket adaptors or third-party chargers as these may make it slower or less efficient to charge your device.
What does the red battery indicator light mean?
You can monitor your level of charge by the colour of the battery indicator: A red battery indicator light means that you should recharge your battery as soon as possible. Because you can charge your blu while it's still fully assembled, vaping is possible while your device is being charged.
Can you vape while charging a blu?
Because you can charge your blu while it's still fully assembled, vaping is possible while your device is being charged. For your safety, do not blow into or subject your device to high heat or pressure. For further information click here.
How to charge myblu?
Every myblu is shipped with a partial charge but we recommend charging it fully before you start using it. To charge myblu, follow these steps: 1 Plug the USB charging cable into a USB-compatible device and then plug the cable into the port at the base of the device. 2 The tip of the device will glow blue to show that it has started to charge. 3 Leave the device to charge for about 20 minutes.
How long does a Myblu battery last?
The myblu battery will last for approximately 4 hours between charges depending on how much you use it. As with the battery running low, you will also get less vapour and a weaker flavour when your liquid pod is empty. Each liquid pod has a clear chamber which allows you to check if you have run out of vape juice.
How to refill myblu?
myblu is refilled using liquid pods which click onto the device. When each is finished, simply remove by lightly pressing on the sides of the liquid pod. After disposing of the old pod you can immediately attach a new one to the myblu.
What to do if myblu pod stops producing vapour?
If your myblu stops producing vapour, you should do the following: • Check the pod is fully-inserted and isn't loose. The pod should click when it's in place. • Remove the pod and check the bottom for any liquid or residue. Check the slot where the pod is inserted for the same.
Why does myblu make a gurgle sound?
Gurgling sounds and the sensation of e-liquid bubbling in the pod can be caused by low battery level or lack of airflow. If the battery level is low the device may not be able to supply enough power to heat the e-liquid adequately. Charging your myblu should resolve the issue.
How to connect myblu to my laptop?
1. Unpack your myblu, pods and cable from the packaging. 2. Plug the USB cable into a USB port, and connect the myblu device to it . The plug should fit snugly in and click. 3. If the device is successfully connected, the LED light on the device will glow red.
Why is my blu pod not inserted?
This can be caused by several things: the pod may not be fully inserted, there could be some liquid or residue between the pod or the battery connection/metal conductors on the pod may have been pushed down too far. If your myblu stops producing vapour, you should do the following: • Check the pod is fully-inserted and isn't loose.
What to do if myblu is leaking?
If your myblu is leaking the first thing you should do is soak up any excess liquid and ensure neither of the air-intake holes are covered.
What to do if my blu isn't working?
If your myblu device isn't working correctly, the first thing you need to do is ensure it's fully charged. The myblu starter kit comes with a USB charging cable; you simply need to connect the cable to the device to get it charged up.
Is myblu a vape?
The myblu isn't a vapour-heavy device. it's designed to deliver nicotine efficiently with little power or vapour, which means it will never provide huge clouds. If you're noticing your myblu is providing less vapour than normal, make sure that it is fully charged; when the battery level is low, the myblu doesn't provide as much power to the heating element. It could also indicate your pod is almost out of liquid!
