Simply adjust the voltage and airflow to your desired settings, add a little e-liquid, and you are ready to go. Speaking of voltage, it can be adjusted between 3.2V and 4.8V. Airflow is adjustable too by opening and closing a small vent between the power button and the e-liquid tank.
Full Answer
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do you use a vape?
Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time. Once your device is unlocked, press the main fire button three times to access the device menu.
How do Smok vapes work?
SMOK vapes have a lock system. This system is a protective measure to ensure that the vaporizer doesn’t misfire while it’s stored in your pocket or purse. Unlock your device, which you can typically do with 5 clicks in rapid succession.
How do you program a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce your pot is full pulls the cap push the pod into the device. And let it sit for 5 to 10 minutesMoreOnce your pot is full pulls the cap push the pod into the device. And let it sit for 5 to 10 minutes. This is to ensure that your coil is saturated with the juice.
How do I change my Smok vape settings?
0:001:31SMOK RPM 4 MOD SETTINGS - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn click the button three times that will lock the screen click the fire button again three times.MoreOn click the button three times that will lock the screen click the fire button again three times. That will unlock the screen up and down power button hold them at the same time.
How do I get my Smok vape to work?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
Why is my Smok vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do I reset my Smok?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you change the wattage on a Smok vape?
To change the device's wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level. When you reach the desired power level, don't touch the fire button for a few seconds.
How do you unlock SMOK?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
Why is my SMOK vape blinking 4 times?
If the LED blinks four times when you press the fire button, there is a problem with the connected atomizer coil. Either the coil has a short circuit, or the resistance of the coil is outside the device's supported range. Either way, the remedy is the same; you should discard the coil and install a new one.
Why is my SMOK vape blinking white?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
When I press the button on my vape nothing happens?
Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal. If a previous tank has been screwed on too tightly, the battery pin may need adjusting to make a connection again.
Why is my SMOK Nord not firing?
If your SMOK Nord is failing to fire, first check to make sure the device is fully charged and is on. To turn the device on, simply click the fire button five times and check to see if the LED on the device turns on.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
First Things First: Charge Up The SMOK Nord
This is important. Your SMOK Nord might power-up, but it’s been sat in its box for weeks, maybe months at a time, so you’ll want to give it a good 60 minute charge before using it for the first time.
How To Prime SMOK Nord Coils (And You Need To Do This)
This one is SUPER important. You have to prime the SMOK Nord’s coils before using them. Failure to do so may lead to burning them out prematurely – and nobody wants that.
Stopping Dry Hits On The SMOK Nord
Once you’ve primed the SMOK Nord coil, insert it into the top cap. Make sure the white line on the bottom of it is pointing at the front and back of the device (not to the sides). This ensures your coil is installed properly and will wick correctly.
How To Check SMOK Nord Battery Life
The SMOK Nord has a fire key. It’s handy for tactile firing and, generally speaking, I prefer this style to breath-activated pod mods.
Anything Else I Need To Know?
Nope, that’s literally it! As I said earlier, the SMOK Nord is a fantastic device that is super-simple to use. It has a kick-ass battery life, especially when used with its MTL coils, and the flavor is great (with both styles of coils).
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
How to verify a smok?
First, use your phone or PC and visit the official SMOK website. Once you’ve navigated to the website, navigate to the SMOK support page. Next, you will want to find the packaging that your SMOK X-Priv Mod came in and scratch off the coating on the security label. The security label is often on the right side of the box, next to the barcode. Once you scratch it, you will see a code that you must input into the field on the webpage to verify the mod. Wait a few seconds and the results will be displayed .
What mode do you use to use a coil?
Also, make sure you are in the correct mode to use the device. If the coil you’re using was designed for wattage mode, you’ll want to make sure you are in wattage (variable wattage) mode. You will then need to adjust the wattage to your preference or the manufacturer’s wattage rating for the coil you’re using.
How to turn on X-Priv?
How To Turn On The X-Priv: To turn the X-Priv on, simply click the firing bar 5-times consecutively. You will then see the SMOK logo and will immediately be redirected to the main screen. Repeat the process to turn the X-Priv off.
