Fortunately, it’s possible to fix that problem with a little ingenuity – and a pair of tweezers. This solution may not work with all disposable vapes, but it will work with many vape pens using the rectangular “puff bar” design that has become so common recently. Using a pair of tweezers, pry the mouthpiece off of your disposable vape.
How do I Fix my vape that won’t puff?
If you cover one of the device’s intake vents with your finger while puffing, you’ll increase the pressure of the air flowing through the disposable vape. That may get the puff sensor working again.
How to fix a disposable vape device that won’t turn on?
Add some e-liquid to the pod and reassemble the device. If your disposable vape has a fiber-based filler material inside, you’ll need to remove the filler material from the device and re-saturate it with e-liquid. When the filler is wet again, you can reassemble the device and resume vaping.
What is a vape auto firing?
The term “auto firing” refers to a vaporizer that is firing, but without the user pressing the main fire or power button. The device is often being stored in a pocket, purse or drawer when it happens, not even within reach of an accidental button push. Why is My Vape Auto Firing a Dangerous Issue?
Why won’t my vape work after a refill?
If your vape isn’t working after a refill and there is no smoke,, there are two common problems. First of all, the battery may need to be charged and turned on.
Why is my vape not firing?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How do I fix my center pin vape?
1:112:43The Center Pin Issue - How to fix an eGo-T Battery DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can probably dig around and find whatever just make sure it's not going to break off and getMoreBut you can probably dig around and find whatever just make sure it's not going to break off and get stuck in there and you can gently push inside here and by pushing this disk.
How do you fix a cart that is not hitting?
However, you'll need to get into a strict routine when using your vape to ensure you get the best results.Take Smaller Hits.Take “Dry” Hits.Clean the Mouthpiece.Hit the Vape Every Few Days.Make Sure it isn't Primed.Take Smaller Hits.Check for Leaks.Store Your Vape In an Upright Position.More items...•
How do you fix a cart that won't fire?
0:101:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
Why is my cart pulling but not hitting?
The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.
Can you dab a broken cart?
It is not safe to dab vapable THC juice from a cartridge. Do not do it.
Why is it so hard to hit my vape?
Chances are, if you're pulling hard on your vape pen it's because you've been pulling too hard in the past and you've flooded the tank. Drawing hard when you vape causes the wicks to absorb more concentrate than the coil can vaporize.
Why does my pen blink when I try to hit it?
If the issue is a leak, turn off your battery and take a Q-tip dipped in rubbing alcohol and clean where the battery and cartridge meet. Make sure to dry them before screwing them back together. Another reason your battery may be flashing is because it may be dead and needs to be charged.
How do you fix a battery thread?
0:164:39How To Fix Stripped Threads on Side Battery Terminal - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you'll also want to get a 3 8 course thread nut to put on that bolt and we'll i'll show you howMoreAnd you'll also want to get a 3 8 course thread nut to put on that bolt and we'll i'll show you how that works here in just a little bit but uh the idea is that this will go in deeper.
Why is my disposable Not working?
Disposable Vape Not Hitting If your disposable vape isn't hitting – and you've been using it for a while without experiencing any problems – it's likely that you need to replace the device. Remember that, for safety reasons, a disposable e-cigarette will always stop hitting when the battery is dead.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Why isn't my vape working?
If your vape isn’t working after a refill and there is no smoke, , there are two common problems. First of all, the battery may need to be charged and turned on. Depending on the style of device you are using, you may need to press the firing button five times consecutively to turn the device on. If you have turned the device on, check ...
Why does my vape stop working?
Even the most experienced vapers sometimes have problems getting a new device to perform as expected. . Your vape may stop producing smoke or stop working all together after a refill. Due to the many interchangeable components within your vape, and the numerous menu options each device has to offer, problems can sometimes occur…
What happens if your atomizer is full?
If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How to know if your atomizer is seated correctly?
You also need to check your atomizer and ensure that it is seated correctly on your device. Look for any signs of rubber o-rings or grommets that are improperly seated as they can allow air bubbles into the system as you vape. Lastly, check your coil for condition. If you have been using the same coil for too long, it may need to be replaced.
How does a vaporizer work?
The vaporizer works by heating the coils which then cause the e-liquid to boil. If you are hearing a small amount of popping and fizzing, it may just be the coils doing their job. However, if you start noticing large popping sounds and gurgling you should begin by checking your tank for overfilling.
Why does my atomizer burn?
The burnt taste is created when your atomizer is not getting enough e-liquid any longer. The most obvious solution is to check your tank and make sure it is adequately filled.
How long does it take for an e-liquid to soak up?
If your coil is discolored or dirty you should replace it. It is also worth noting that your e-liquid takes a few minutes to soak up into your wick. If you have just refilled your tank, let your device sit for a couple minutes before using it or you may get a dry hit.
zenoland Senior Member Verified Member ECF Veteran
Unless I remove the battery, my Grand does not seem to want to stop working. Does that mean a stuck firing pin? Is it something I can fix myself or should I send it for repair. I've ordered a new Grand so I will need to keep this one till my new one arrives. I have a Mini as backup but find the Grand easier to hold.
Rhapsodies Fire ECF Guru ECF Veteran
First...pop out the batteries, remove your atty and juice bottle. As long as this one isn't VV, run some hot tap water through your mod. Try working the button up and down. You can also run some alcohol through it to see if that helps clear it up. If that works, then either let your mod dry or use compressed air to blow excess water out.
zenoland Senior Member Verified Member ECF Veteran
Other than using alcohol, I have tried the cleaning route. I will try the alcohol too.
Rhapsodies Fire ECF Guru ECF Veteran
I forgot to mention that yes, most things you can fix yourself. But calling Rob always helps.
FeistyAlice ECF Guru Verified Member ECF Veteran
Alcohol soak. Do not do this with any Wood REOs or VV REOs. Also use a syringe or similar to gently force alcohol into firing pin area from top, at button, and bottom where you can see the firing pin. Work the button around some and up and down. Repeat as needed.
FeistyAlice ECF Guru Verified Member ECF Veteran
My previous post raises question that I've wondered about since my first "chipped" PV. Would 99% isopropyl really do any harm to chip if device was allowed to dry thoroughly before using? Isopropyl at high % is used to clean all kinds of electronics.
Dan Patrick Ultra Member Verified Member ECF Veteran
I think it could be done, it's not water, but I don't see how that would ever be necessary with a VV, since there are no moving parts, and everything is sealed up pretty well. I will say that I can disassemble a metal reo and do pretty much everything except take off the tube.
