Can I vape while my Cool Fire is charging?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
How do I use the Cool Fire IV?
If you’re using it throughout the day, you can also lock the Cool Fire by pressing the power button 3 times. The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together.
What is the difference between the coolfire IV and IV plus?
The new Coolfire IV Plus is marginally thicker and heavier than the original, but therefore boasts a larger battery capacity, higher max wattage and can fire down to a lower resistance. The Coolfire IV Plus has a nice 3300mAh battery vs the 2000mAh on the original.
How accurate is the power of the Cool Fire IV?
The Cool Fire IV uses Vrms DC current and is very accurate with a power deviation of 0.1Watt. The full 40 Watts is precisely maintained between resistances of 0.3 to 2.5 Ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose.
How do I change my CoolFire IV from Volts to Watts?
To switch to watts, hold down the fire button at the same time with “+” button. If you want to enter Variable Voltage mode, hold the fire button and “-“ button down together.
What tanks are compatible with CoolFire IV?
Compatibility. The CoolFire IV vapes perfectly with the Innokin iSub Apex & iSub-G Sub Ohm tanks.
What is CoolFire IV?
Description. The Cool Fire IV Vape Mod with 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on! The compact power, bright OLED display, long lasting battery capacity and easy to use menu system.
How do I fix the atomizer on my cool fire 4?
A 'Shorted' or 'Check Atomiser' error message means somewhere in the device's connection, the atomiser is causing an electrical short circuit. To resolve the issue, you will need to replace the coil in the tank.
How do I change my CoolFire IV TC100?
The CoolFireIV TC100 wattage can be adjusted from 6.0 to 100 watts in . 5 watt increments by pressing and holding the “+” or “-” button. Hold the button down to quickly increase or decrease the set wattage. If the wattage is decreased below 6 Watts it will cycle up to 100 Watts.
How do I change the wattage on my innokin?
The Innokin Kroma-A mod features two small buttons just above the USB charging port. To change the wattage on your device, press the up (+) button to increase and the down (-) button to decrease the wattage.
How do you change the wattage on a coolfire Ultra?
1:112:25Innokin Coolfire Ultra Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour up or down your hold in either the up or down for a second until it flashes. And then you canMoreYour up or down your hold in either the up or down for a second until it flashes. And then you can scroll and adjust your wattage.
Why is my vape not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why is my innokin vape flashing green?
The green flashing like is an indicator that there is a shortage between the coil and battery.
Why is there no vapor coming out of my vape?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How much vaping power does a Coolfire IV have?
With 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on!
Is there wasted power in vaping?
There is no wasted power and exact accuracy means you are always vaping the power level that you choose. Vrms provides superior precision in delivering the exact wattage Ohm’s Law requires and stable power means better vapor. HIGHLIGHT.
What is the Innokin Coolfire IV Plus?
We take a look at the brand new Innokin Coolfire IV box mod. The Coolfire IV Plus is an upgraded version of the popular Innokin Coolfire IV mod. The new Coolfire IV Plus is marginally thicker and heavier than the original, but therefore boasts a larger battery capacity, higher max wattage and can fire down to a lower resistance. The Coolfire IV Plus has a nice 3300mAh battery vs the 2000mAh on the original. The Plus now has a max wattage of 70W, up from 40W on the original. Lastly you can now fire down to 0.1ohm on the Plus, whereas the original could only go down to 0.3ohm. In a market where higher power and lower resistances has become quite mainstream, the Coolfire IV Plus boasts some much needed improvements. The Coolfire IV Plus does not have temperature control, so if you are looking for that, you will need to look at Innokin’s new Cortex mod instead.
Is the Innokin Coolfire Plus chubby?
Whilst the new Coolfire Plus is slightly chubbier than the original, Innokin have managed to somehow make it look even sleeker. The one we have in Black, looks really nice and it sits really nicely in the hand whilst vaping.
Does Coolfire IV Plus have temperature control?
The Coolfire IV Plus does not feature temperature control, but I can still see it appealing to a lot of vapers who are looking for a mod in this wattage range. It is a great looking and well built box mod and I can see it being very popular with beginner to intermediate type vapers.
Stop being dicks to vendors
it's the holiday season during a global pandemic. People are working hard. If someone doesn't answer your email in less than 24 hours, don't threaten chargebacks or to trash the business on reddit.
Eureka! Government Agency Discovers Vapes Do NOT Contain Tobacco (Results Subject to Change)
E-cigarettes and vape devices transform a liquid into its gaseous form, allowing the user to inhale and ingest the vapor. The liquid that is vaporized does not contain tobacco. Rather, the liquid cartridges used in these devices can contain a variety of compounds, including nicotine.
Rick Vapor Moved On
I have had a cool fire 4 for about 6-8 months. The thing does not charge anymore. I let it go completely dead battery and then charged it a day or two later, now the thing just flashes the yellow green red like simon and every few secs the many lights up. It will not hold a charge and I'm confused if I screwed it up or if it is a quick fix.
Rick Vapor Moved On
Have you made sure that the manual ON/OFF switch is switched to "ON" on the bottom of the device? That master switch takes precedence over everything else.
Subohm ash New Member
I have had a cool fire 4 for about 6-8 months. The thing does not charge anymore. I let it go completely dead battery and then charged it a day or two later, now the thing just flashes the yellow green red like simon and every few secs the many lights up. It will not hold a charge and I'm confused if I screwed it up or if it is a quick fix.
What Else Can I Do?
Until all vapes and vape batteries conform to strong and consistent safety standards, your best protection against vape battery fires or explosions may be knowing as much as possible about your device and how to properly handle and charge its batteries.
Downloads
Share these tips with your friends—download the images below and share with your social media community.
How Do I Report a Vape Battery Fire or Explosion to FDA?
Information from consumers about vape fires or explosions can help FDA to address these problems. Anyone can report any undesired health or quality problems with a vape, including fires or explosions, to FDA through the Safety Reporting Portal. When you fill out the form, please be sure to include:
